1 /* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
3 This software may be distributed and modified under the terms of the GNU
4 General Public License version 2 (GPL2) as published by the Free Software
5 Foundation and appearing in the file GPL2.TXT included in the packaging of
6 this file. Please note that GPL2 Section 2[b] requires that all works based
7 on this software must also be made publicly available under the terms of
14 Web : http://www.circuitsathome.com
15 e-mail : support@circuitsathome.com
18 /* derived from Konstantin Chizhov's AVR port templates */
20 #if !defined(_usb_h_) || defined(_avrpins_h_)
21 #error "Never include avrpins.h directly; include Usb.h instead"
27 // pointers are 16 bits on AVR
28 #define pgm_read_pointer(p) pgm_read_word(p)
30 // Support for these boards needs to be manually activated in settings.h or in a makefile
31 #if !defined(BOARD_MEGA_ADK) && defined(__AVR_ATmega2560__) && (USE_UHS_MEGA_ADK || defined(ARDUINO_AVR_ADK))
32 #define BOARD_MEGA_ADK
33 #elif !defined(BOARD_BLACK_WIDDOW) && USE_UHS_BLACK_WIDDOW
34 #define BOARD_BLACK_WIDDOW
87 //Port definitions for AtTiny, AtMega families.
89 #define MAKE_PORT(portName, ddrName, pinName, className, ID) \
92 typedef uint8_t DataT;\
94 static void Write(DataT value){portName = value;}\
95 static void ClearAndSet(DataT clearMask, DataT value){portName = (portName & ~clearMask) | value;}\
96 static DataT Read(){return portName;}\
97 static void DirWrite(DataT value){ddrName = value;}\
98 static DataT DirRead(){return ddrName;}\
99 static void Set(DataT value){portName |= value;}\
100 static void Clear(DataT value){portName &= ~value;}\
101 static void Toggle(DataT value){portName ^= value;}\
102 static void DirSet(DataT value){ddrName |= value;}\
103 static void DirClear(DataT value){ddrName &= ~value;}\
104 static void DirToggle(DataT value){ddrName ^= value;}\
105 static DataT PinRead(){return pinName;}\
107 enum{Width=sizeof(DataT)*8};\
110 // TCCR registers to set/clear Arduino PWM
111 #define MAKE_TCCR(TccrName, className) \
114 typedef uint8_t DataT;\
116 static void Write(DataT value){TccrName = value;}\
117 static void ClearAndSet(DataT clearMask, DataT value){TccrName = (TccrName & ~clearMask) | value;}\
118 static DataT Read(){return TccrName;}\
119 static void Set(DataT value){TccrName |= value;}\
120 static void Clear(DataT value){TccrName &= ~value;}\
121 static void Toggle(DataT value){TccrName ^= value;}\
122 enum{Width=sizeof(DataT)*8};\
127 MAKE_PORT(PORTA, DDRA, PINA, Porta, 'A')
130 MAKE_PORT(PORTB, DDRB, PINB, Portb, 'B')
133 MAKE_PORT(PORTC, DDRC, PINC, Portc, 'C')
136 MAKE_PORT(PORTD, DDRD, PIND, Portd, 'D')
139 MAKE_PORT(PORTE, DDRE, PINE, Porte, 'E')
142 MAKE_PORT(PORTF, DDRF, PINF, Portf, 'F')
145 MAKE_PORT(PORTG, DDRG, PING, Portg, 'G')
148 MAKE_PORT(PORTH, DDRH, PINH, Porth, 'H')
151 MAKE_PORT(PORTJ, DDRJ, PINJ, Portj, 'J')
154 MAKE_PORT(PORTK, DDRK, PINK, Portk, 'K')
157 MAKE_PORT(PORTL, DDRL, PINL, Portl, 'L')
160 MAKE_PORT(PORTQ, DDRQ, PINQ, Portq, 'Q')
163 MAKE_PORT(PORTR, DDRR, PINR, Portr, 'R')
167 MAKE_TCCR(TCCR0A, Tccr0a)
170 MAKE_TCCR(TCCR1A, Tccr1a)
173 MAKE_TCCR(TCCR2A, Tccr2a)
176 // this class represents one pin in a IO port.
177 // It is fully static.
178 template<typename PORT, uint8_t PIN>
180 // BOOST_STATIC_ASSERT(PIN < PORT::Width);
192 static void Set(uint8_t val) {
198 static void SetDir(uint8_t val) {
204 static void Clear() {
205 PORT::Clear(1 << PIN);
208 static void Toggle() {
209 PORT::Toggle(1 << PIN);
212 static void SetDirRead() {
213 PORT::DirClear(1 << PIN);
216 static void SetDirWrite() {
217 PORT::DirSet(1 << PIN);
220 static uint8_t IsSet() {
221 return PORT::PinRead() & (uint8_t)(1 << PIN);
224 static void WaiteForSet() {
225 while(IsSet() == 0) {
229 static void WaiteForClear() {
235 // this class represents one bit in TCCR port.
236 // used to set/clear TCCRx bits
237 // It is fully static.
239 template<typename TCCR, uint8_t COM>
241 // BOOST_STATIC_ASSERT(PIN < PORT::Width);
253 static void Clear() {
254 TCCR::Clear(1 << COM);
257 static void Toggle() {
258 TCCR::Toggle(1 << COM);
262 //Short pin definitions
264 typedef TPin<Porta, 0 > Pa0;
265 typedef TPin<Porta, 1 > Pa1;
266 typedef TPin<Porta, 2 > Pa2;
267 typedef TPin<Porta, 3 > Pa3;
268 typedef TPin<Porta, 4 > Pa4;
269 typedef TPin<Porta, 5 > Pa5;
270 typedef TPin<Porta, 6 > Pa6;
271 typedef TPin<Porta, 7 > Pa7;
275 typedef TPin<Portb, 0 > Pb0;
276 typedef TPin<Portb, 1 > Pb1;
277 typedef TPin<Portb, 2 > Pb2;
278 typedef TPin<Portb, 3 > Pb3;
279 typedef TPin<Portb, 4 > Pb4;
280 typedef TPin<Portb, 5 > Pb5;
281 typedef TPin<Portb, 6 > Pb6;
282 typedef TPin<Portb, 7 > Pb7;
286 typedef TPin<Portc, 0 > Pc0;
287 typedef TPin<Portc, 1 > Pc1;
288 typedef TPin<Portc, 2 > Pc2;
289 typedef TPin<Portc, 3 > Pc3;
290 typedef TPin<Portc, 4 > Pc4;
291 typedef TPin<Portc, 5 > Pc5;
292 typedef TPin<Portc, 6 > Pc6;
293 typedef TPin<Portc, 7 > Pc7;
297 typedef TPin<Portd, 0 > Pd0;
298 typedef TPin<Portd, 1 > Pd1;
299 typedef TPin<Portd, 2 > Pd2;
300 typedef TPin<Portd, 3 > Pd3;
301 typedef TPin<Portd, 4 > Pd4;
302 typedef TPin<Portd, 5 > Pd5;
303 typedef TPin<Portd, 6 > Pd6;
304 typedef TPin<Portd, 7 > Pd7;
308 typedef TPin<Porte, 0 > Pe0;
309 typedef TPin<Porte, 1 > Pe1;
310 typedef TPin<Porte, 2 > Pe2;
311 typedef TPin<Porte, 3 > Pe3;
312 typedef TPin<Porte, 4 > Pe4;
313 typedef TPin<Porte, 5 > Pe5;
314 typedef TPin<Porte, 6 > Pe6;
315 typedef TPin<Porte, 7 > Pe7;
319 typedef TPin<Portf, 0 > Pf0;
320 typedef TPin<Portf, 1 > Pf1;
321 typedef TPin<Portf, 2 > Pf2;
322 typedef TPin<Portf, 3 > Pf3;
323 typedef TPin<Portf, 4 > Pf4;
324 typedef TPin<Portf, 5 > Pf5;
325 typedef TPin<Portf, 6 > Pf6;
326 typedef TPin<Portf, 7 > Pf7;
330 typedef TPin<Portg, 0 > Pg0;
331 typedef TPin<Portg, 1 > Pg1;
332 typedef TPin<Portg, 2 > Pg2;
333 typedef TPin<Portg, 3 > Pg3;
334 typedef TPin<Portg, 4 > Pg4;
335 typedef TPin<Portg, 5 > Pg5;
336 typedef TPin<Portg, 6 > Pg6;
337 typedef TPin<Portg, 7 > Pg7;
341 typedef TPin<Porth, 0 > Ph0;
342 typedef TPin<Porth, 1 > Ph1;
343 typedef TPin<Porth, 2 > Ph2;
344 typedef TPin<Porth, 3 > Ph3;
345 typedef TPin<Porth, 4 > Ph4;
346 typedef TPin<Porth, 5 > Ph5;
347 typedef TPin<Porth, 6 > Ph6;
348 typedef TPin<Porth, 7 > Ph7;
352 typedef TPin<Portj, 0 > Pj0;
353 typedef TPin<Portj, 1 > Pj1;
354 typedef TPin<Portj, 2 > Pj2;
355 typedef TPin<Portj, 3 > Pj3;
356 typedef TPin<Portj, 4 > Pj4;
357 typedef TPin<Portj, 5 > Pj5;
358 typedef TPin<Portj, 6 > Pj6;
359 typedef TPin<Portj, 7 > Pj7;
363 typedef TPin<Portk, 0 > Pk0;
364 typedef TPin<Portk, 1 > Pk1;
365 typedef TPin<Portk, 2 > Pk2;
366 typedef TPin<Portk, 3 > Pk3;
367 typedef TPin<Portk, 4 > Pk4;
368 typedef TPin<Portk, 5 > Pk5;
369 typedef TPin<Portk, 6 > Pk6;
370 typedef TPin<Portk, 7 > Pk7;
374 typedef TPin<Portl, 0 > Pl0;
375 typedef TPin<Portl, 1 > Pl1;
376 typedef TPin<Portl, 2 > Pl2;
377 typedef TPin<Portl, 3 > Pl3;
378 typedef TPin<Portl, 4 > Pl4;
379 typedef TPin<Portl, 5 > Pl5;
380 typedef TPin<Portl, 6 > Pl6;
381 typedef TPin<Portl, 7 > Pl7;
385 typedef TPin<Portq, 0 > Pq0;
386 typedef TPin<Portq, 1 > Pq1;
387 typedef TPin<Portq, 2 > Pq2;
388 typedef TPin<Portq, 3 > Pq3;
389 typedef TPin<Portq, 4 > Pq4;
390 typedef TPin<Portq, 5 > Pq5;
391 typedef TPin<Portq, 6 > Pq6;
392 typedef TPin<Portq, 7 > Pq7;
396 typedef TPin<Portr, 0 > Pr0;
397 typedef TPin<Portr, 1 > Pr1;
398 typedef TPin<Portr, 2 > Pr2;
399 typedef TPin<Portr, 3 > Pr3;
400 typedef TPin<Portr, 4 > Pr4;
401 typedef TPin<Portr, 5 > Pr5;
402 typedef TPin<Portr, 6 > Pr6;
403 typedef TPin<Portr, 7 > Pr7;
407 typedef TCom<Tccr0a, COM0A1> Tc0a; //P6
408 typedef TCom<Tccr0a, COM0B1> Tc0b; //P5
412 typedef TCom<Tccr1a, COM1A1> Tc1a; //P9
413 typedef TCom<Tccr1a, COM1B1> Tc1b; //P10
417 typedef TCom<Tccr2a, COM2A1> Tc2a; //P11
418 typedef TCom<Tccr2a, COM2B1> Tc2b; //P3
421 template<typename Tp_pin, typename Tc_bit>
425 static void SetDir(uint8_t val) {
431 static void SetDirRead() {
432 Tp_pin::SetDirRead(); //set pin direction
433 Tc_bit::Clear(); //disconnect pin from PWM
436 static void SetDirWrite() {
437 Tp_pin::SetDirWrite();
442 /* pin definitions for cases where it's necessary to clear compare output mode bits */
444 //typedef Tp_Tc<Pd3, Tc2b> P3; //Arduino pin 3
445 //typedef Tp_Tc<Pd5, Tc0b> P5; //Arduino pin 5
446 //typedef Tp_Tc<Pd6, Tc0a> P6; //Arduino pin 6
447 //typedef Tp_Tc<Pb1, Tc1a> P9; //Arduino pin 9
448 //typedef Tp_Tc<Pb2, Tc1b> P10; //Arduino pin 10
449 //typedef Tp_Tc<Pb3, Tc2a> P11; //Arduino pin 11
451 /* Arduino pin definitions */
452 #if defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
453 // "Mega" Arduino pin numbers
514 #ifdef BOARD_MEGA_ADK // These pins are not broken out on the Arduino ADK
515 #define P54 Pe6 // INT on Arduino ADK
516 #define P55 Pj2 // MAX_RESET on Arduino ADK
519 // "Mega" pin numbers
521 #elif defined(__AVR_ATmega168__) || defined(__AVR_ATmega328P__)
522 // "Classic" Arduino pin numbers
547 // "Classic" Arduino pin numbers
549 #elif defined(CORE_TEENSY) && defined(__AVR_ATmega32U4__)
550 // Teensy 2.0 pin numbers
551 // http://www.pjrc.com/teensy/pinout.html
579 #elif defined(__AVR_ATmega32U4__)
580 // Arduino Leonardo pin numbers
582 #define P0 Pd2 // D0 - PD2
583 #define P1 Pd3 // D1 - PD3
584 #define P2 Pd1 // D2 - PD1
585 #define P3 Pd0 // D3 - PD0
586 #define P4 Pd4 // D4 - PD4
587 #define P5 Pc6 // D5 - PC6
588 #define P6 Pd7 // D6 - PD7
589 #define P7 Pe6 // D7 - PE6
591 #define P8 Pb4 // D8 - PB4
592 #define P9 Pb5 // D9 - PB5
593 #define P10 Pb6 // D10 - PB6
594 #define P11 Pb7 // D11 - PB7
595 #define P12 Pd6 // D12 - PD6
596 #define P13 Pc7 // D13 - PC7
598 #define P14 Pb3 // D14 - MISO - PB3
599 #define P15 Pb1 // D15 - SCK - PB1
600 #define P16 Pb2 // D16 - MOSI - PB2
601 #define P17 Pb0 // D17 - SS - PB0
603 #define P18 Pf7 // D18 - A0 - PF7
604 #define P19 Pf6 // D19 - A1 - PF6
605 #define P20 Pf5 // D20 - A2 - PF5
606 #define P21 Pf4 // D21 - A3 - PF4
607 #define P22 Pf1 // D22 - A4 - PF1
608 #define P23 Pf0 // D23 - A5 - PF0
610 #define P24 Pd4 // D24 / D4 - A6 - PD4
611 #define P25 Pd7 // D25 / D6 - A7 - PD7
612 #define P26 Pb4 // D26 / D8 - A8 - PB4
613 #define P27 Pb5 // D27 / D9 - A9 - PB5
614 #define P28 Pb6 // D28 / D10 - A10 - PB6
615 #define P29 Pd6 // D29 / D12 - A11 - PD6
617 // Arduino Leonardo pin numbers
619 #elif defined(CORE_TEENSY) && (defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB1286__))
620 // Teensy++ 1.0 and 2.0 pin numbers
621 // http://www.pjrc.com/teensy/pinout.html
668 // Teensy++ 1.0 and 2.0
670 #elif defined(ARDUINO_AVR_BALANDUINO) && (defined(__AVR_ATmega644__) || defined(__AVR_ATmega1284P__))
671 // Balanduino pin numbers
672 // http://balanduino.net/
673 #define P0 Pd0 /* 0 - PD0 */
674 #define P1 Pd1 /* 1 - PD1 */
676 #if BALANDUINO_REVISION < 13
677 #define P2 Pb2 /* 2 - PB2 */
678 #define P3 Pd6 /* 3 - PD6 */
679 #define P4 Pd7 /* 4 - PD7 */
680 #define P5 Pb3 /* 5 - PB3 */
682 #define P2 Pd2 /* 2 - PD2 */
683 #define P3 Pd3 /* 3 - PD3 */
684 #define P4 Pd6 /* 4 - PD6 */
685 #define P5 Pd7 /* 5 - PD7 */
688 #define P6 Pb4 /* 6 - PB4 */
689 #define P7 Pa0 /* 7 - PA0 */
690 #define P8 Pa1 /* 8 - PA1 */
691 #define P9 Pa2 /* 9 - PA2 */
692 #define P10 Pa3 /* 10 - PA3 */
693 #define P11 Pa4 /* 11 - PA4 */
694 #define P12 Pa5 /* 12 - PA5 */
695 #define P13 Pc1 /* 13 - PC1 */
696 #define P14 Pc0 /* 14 - PC0 */
698 #if BALANDUINO_REVISION < 13
699 #define P15 Pd2 /* 15 - PD2 */
700 #define P16 Pd3 /* 16 - PD3 */
702 #define P15 Pb2 /* 15 - PB2 */
703 #define P16 Pb3 /* 16 - PB2 */
706 #define P17 Pd4 /* 17 - PD4 */
707 #define P18 Pd5 /* 18 - PD5 */
708 #define P19 Pc2 /* 19 - PC2 */
709 #define P20 Pc3 /* 20 - PC3 */
710 #define P21 Pc4 /* 21 - PC4 */
711 #define P22 Pc5 /* 22 - PC5 */
712 #define P23 Pc6 /* 23 - PC6 */
713 #define P24 Pc7 /* 24 - PC7 */
714 #define P25 Pb0 /* 25 - PB0 */
715 #define P26 Pb1 /* 26 - PB1 */
716 #define P27 Pb5 /* 27 - PB5 */
717 #define P28 Pb6 /* 28 - PB6 */
718 #define P29 Pb7 /* 29 - PB7 */
719 #define P30 Pa6 /* 30 - PA6 */
720 #define P31 Pa7 /* 31 - PA7 */
723 #elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega1284__) || defined(__AVR_ATmega1284P__)
724 // Sanguino pin numbers
725 // Homepage: http://sanguino.cc/hardware
726 // Hardware add-on: https://github.com/Lauszus/Sanguino
762 #error "Please define board in avrpins.h"
764 #endif // Arduino pin definitions
766 #elif defined(__arm__)
768 // pointers are 32 bits on ARM
769 #define pgm_read_pointer(p) pgm_read_dword(p)
771 #if defined(CORE_TEENSY) && (defined(__MK20DX128__) || defined(__MK20DX256__))
773 #include "core_pins.h"
774 #include "avr_emulation.h"
776 #define GPIO_BITBAND_ADDR(reg, bit) (((uint32_t)&(reg) - 0x40000000) * 32 + (bit) * 4 + 0x42000000)
777 #define GPIO_BITBAND_PTR(reg, bit) ((uint8_t *)GPIO_BITBAND_ADDR((reg), (bit)))
779 #define MAKE_PIN(className, baseReg, pinNum, configReg) \
782 static void Set() { \
783 *GPIO_BITBAND_PTR(baseReg, pinNum) = 1; \
785 static void Clear() { \
786 *GPIO_BITBAND_PTR(baseReg, pinNum) = 0; \
788 static void SetDirRead() { \
789 configReg = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); \
790 *(GPIO_BITBAND_PTR(baseReg, pinNum) + 640) = 0; \
792 static void SetDirWrite() { \
793 configReg = PORT_PCR_SRE | PORT_PCR_DSE | PORT_PCR_MUX(1); \
794 *(GPIO_BITBAND_PTR(baseReg, pinNum) + 640) = 1; \
796 static uint8_t IsSet() { \
797 return *(GPIO_BITBAND_PTR(baseReg, pinNum) + 512); \
801 MAKE_PIN(P0, CORE_PIN0_PORTREG, CORE_PIN0_BIT, CORE_PIN0_CONFIG);
802 MAKE_PIN(P1, CORE_PIN1_PORTREG, CORE_PIN1_BIT, CORE_PIN1_CONFIG);
803 MAKE_PIN(P2, CORE_PIN2_PORTREG, CORE_PIN2_BIT, CORE_PIN2_CONFIG);
804 MAKE_PIN(P3, CORE_PIN3_PORTREG, CORE_PIN3_BIT, CORE_PIN3_CONFIG);
805 MAKE_PIN(P4, CORE_PIN4_PORTREG, CORE_PIN4_BIT, CORE_PIN4_CONFIG);
806 MAKE_PIN(P5, CORE_PIN5_PORTREG, CORE_PIN5_BIT, CORE_PIN5_CONFIG);
807 MAKE_PIN(P6, CORE_PIN6_PORTREG, CORE_PIN6_BIT, CORE_PIN6_CONFIG);
808 MAKE_PIN(P7, CORE_PIN7_PORTREG, CORE_PIN7_BIT, CORE_PIN7_CONFIG);
809 MAKE_PIN(P8, CORE_PIN8_PORTREG, CORE_PIN8_BIT, CORE_PIN8_CONFIG);
810 MAKE_PIN(P9, CORE_PIN9_PORTREG, CORE_PIN9_BIT, CORE_PIN9_CONFIG);
811 MAKE_PIN(P10, CORE_PIN10_PORTREG, CORE_PIN10_BIT, CORE_PIN10_CONFIG);
812 MAKE_PIN(P11, CORE_PIN11_PORTREG, CORE_PIN11_BIT, CORE_PIN11_CONFIG);
813 MAKE_PIN(P12, CORE_PIN12_PORTREG, CORE_PIN12_BIT, CORE_PIN12_CONFIG);
814 MAKE_PIN(P13, CORE_PIN13_PORTREG, CORE_PIN13_BIT, CORE_PIN13_CONFIG);
815 MAKE_PIN(P14, CORE_PIN14_PORTREG, CORE_PIN14_BIT, CORE_PIN14_CONFIG);
816 MAKE_PIN(P15, CORE_PIN15_PORTREG, CORE_PIN15_BIT, CORE_PIN15_CONFIG);
817 MAKE_PIN(P16, CORE_PIN16_PORTREG, CORE_PIN16_BIT, CORE_PIN16_CONFIG);
818 MAKE_PIN(P17, CORE_PIN17_PORTREG, CORE_PIN17_BIT, CORE_PIN17_CONFIG);
819 MAKE_PIN(P18, CORE_PIN18_PORTREG, CORE_PIN18_BIT, CORE_PIN18_CONFIG);
820 MAKE_PIN(P19, CORE_PIN19_PORTREG, CORE_PIN19_BIT, CORE_PIN19_CONFIG);
821 MAKE_PIN(P20, CORE_PIN20_PORTREG, CORE_PIN20_BIT, CORE_PIN20_CONFIG);
822 MAKE_PIN(P21, CORE_PIN21_PORTREG, CORE_PIN21_BIT, CORE_PIN21_CONFIG);
823 MAKE_PIN(P22, CORE_PIN22_PORTREG, CORE_PIN22_BIT, CORE_PIN22_CONFIG);
824 MAKE_PIN(P23, CORE_PIN23_PORTREG, CORE_PIN23_BIT, CORE_PIN23_CONFIG);
825 MAKE_PIN(P24, CORE_PIN24_PORTREG, CORE_PIN24_BIT, CORE_PIN24_CONFIG);
826 MAKE_PIN(P25, CORE_PIN25_PORTREG, CORE_PIN25_BIT, CORE_PIN25_CONFIG);
827 MAKE_PIN(P26, CORE_PIN26_PORTREG, CORE_PIN26_BIT, CORE_PIN26_CONFIG);
828 MAKE_PIN(P27, CORE_PIN27_PORTREG, CORE_PIN27_BIT, CORE_PIN27_CONFIG);
829 MAKE_PIN(P28, CORE_PIN28_PORTREG, CORE_PIN28_BIT, CORE_PIN28_CONFIG);
830 MAKE_PIN(P29, CORE_PIN29_PORTREG, CORE_PIN29_BIT, CORE_PIN29_CONFIG);
831 MAKE_PIN(P30, CORE_PIN30_PORTREG, CORE_PIN30_BIT, CORE_PIN30_CONFIG);
832 MAKE_PIN(P31, CORE_PIN31_PORTREG, CORE_PIN31_BIT, CORE_PIN31_CONFIG);
833 MAKE_PIN(P32, CORE_PIN32_PORTREG, CORE_PIN32_BIT, CORE_PIN32_CONFIG);
834 MAKE_PIN(P33, CORE_PIN33_PORTREG, CORE_PIN33_BIT, CORE_PIN33_CONFIG);
838 #elif defined(ARDUINO_SAM_DUE) && defined(__SAM3X8E__)
841 // Disable interrupts
842 // Disable the pull up resistor
847 // Disable interrupts
848 // Disable the pull up resistor
852 #define MAKE_PIN(className, pio, pinMask) \
855 static void Set() { \
856 pio->PIO_SODR = pinMask; \
858 static void Clear() { \
859 pio->PIO_CODR = pinMask; \
861 static void SetDirRead() { \
862 pio->PIO_IDR = pinMask ; \
863 pio->PIO_PUDR = pinMask; \
864 pio->PIO_ODR = pinMask; \
865 pio->PIO_PER = pinMask; \
867 static void SetDirWrite() { \
868 pio->PIO_IDR = pinMask ; \
869 pio->PIO_PUDR = pinMask; \
870 pio->PIO_OER = pinMask; \
871 pio->PIO_PER = pinMask; \
873 static uint8_t IsSet() { \
874 return pio->PIO_PDSR & pinMask; \
878 // See: http://arduino.cc/en/Hacking/PinMappingSAM3X and variant.cpp
880 MAKE_PIN(P0, PIOA, PIO_PA8);
881 MAKE_PIN(P1, PIOA, PIO_PA9);
882 MAKE_PIN(P2, PIOB, PIO_PB25);
883 MAKE_PIN(P3, PIOC, PIO_PC28);
884 MAKE_PIN(P4, PIOC, PIO_PC26);
885 MAKE_PIN(P5, PIOC, PIO_PC25);
886 MAKE_PIN(P6, PIOC, PIO_PC24);
887 MAKE_PIN(P7, PIOC, PIO_PC23);
888 MAKE_PIN(P8, PIOC, PIO_PC22);
889 MAKE_PIN(P9, PIOC, PIO_PC21);
890 MAKE_PIN(P10, PIOC, PIO_PC29);
891 MAKE_PIN(P11, PIOD, PIO_PD7);
892 MAKE_PIN(P12, PIOD, PIO_PD8);
893 MAKE_PIN(P13, PIOB, PIO_PB27);
894 MAKE_PIN(P14, PIOD, PIO_PD4);
895 MAKE_PIN(P15, PIOD, PIO_PD5);
896 MAKE_PIN(P16, PIOA, PIO_PA13);
897 MAKE_PIN(P17, PIOA, PIO_PA12);
898 MAKE_PIN(P18, PIOA, PIO_PA11);
899 MAKE_PIN(P19, PIOA, PIO_PA10);
900 MAKE_PIN(P20, PIOB, PIO_PB12);
901 MAKE_PIN(P21, PIOB, PIO_PB13);
902 MAKE_PIN(P22, PIOB, PIO_PB26);
903 MAKE_PIN(P23, PIOA, PIO_PA14);
904 MAKE_PIN(P24, PIOA, PIO_PA15);
905 MAKE_PIN(P25, PIOD, PIO_PD0);
906 MAKE_PIN(P26, PIOD, PIO_PD1);
907 MAKE_PIN(P27, PIOD, PIO_PD2);
908 MAKE_PIN(P28, PIOD, PIO_PD3);
909 MAKE_PIN(P29, PIOD, PIO_PD6);
910 MAKE_PIN(P30, PIOD, PIO_PD9);
911 MAKE_PIN(P31, PIOA, PIO_PA7);
912 MAKE_PIN(P32, PIOD, PIO_PD10);
913 MAKE_PIN(P33, PIOC, PIO_PC1);
914 MAKE_PIN(P34, PIOC, PIO_PC2);
915 MAKE_PIN(P35, PIOC, PIO_PC3);
916 MAKE_PIN(P36, PIOC, PIO_PC4);
917 MAKE_PIN(P37, PIOC, PIO_PC5);
918 MAKE_PIN(P38, PIOC, PIO_PC6);
919 MAKE_PIN(P39, PIOC, PIO_PC7);
920 MAKE_PIN(P40, PIOC, PIO_PC8);
921 MAKE_PIN(P41, PIOC, PIO_PC9);
922 MAKE_PIN(P42, PIOA, PIO_PA19);
923 MAKE_PIN(P43, PIOA, PIO_PA20);
924 MAKE_PIN(P44, PIOC, PIO_PC19);
925 MAKE_PIN(P45, PIOC, PIO_PC18);
926 MAKE_PIN(P46, PIOC, PIO_PC17);
927 MAKE_PIN(P47, PIOC, PIO_PC16);
928 MAKE_PIN(P48, PIOC, PIO_PC15);
929 MAKE_PIN(P49, PIOC, PIO_PC14);
930 MAKE_PIN(P50, PIOC, PIO_PC13);
931 MAKE_PIN(P51, PIOC, PIO_PC12);
932 MAKE_PIN(P52, PIOB, PIO_PB21);
933 MAKE_PIN(P53, PIOB, PIO_PB14);
934 MAKE_PIN(P54, PIOA, PIO_PA16);
935 MAKE_PIN(P55, PIOA, PIO_PA24);
936 MAKE_PIN(P56, PIOA, PIO_PA23);
937 MAKE_PIN(P57, PIOA, PIO_PA22);
938 MAKE_PIN(P58, PIOA, PIO_PA6);
939 MAKE_PIN(P59, PIOA, PIO_PA4);
940 MAKE_PIN(P60, PIOA, PIO_PA3);
941 MAKE_PIN(P61, PIOA, PIO_PA2);
942 MAKE_PIN(P62, PIOB, PIO_PB17);
943 MAKE_PIN(P63, PIOB, PIO_PB18);
944 MAKE_PIN(P64, PIOB, PIO_PB19);
945 MAKE_PIN(P65, PIOB, PIO_PB20);
946 MAKE_PIN(P66, PIOB, PIO_PB15);
947 MAKE_PIN(P67, PIOB, PIO_PB16);
948 MAKE_PIN(P68, PIOA, PIO_PA1);
949 MAKE_PIN(P69, PIOA, PIO_PA0);
950 MAKE_PIN(P70, PIOA, PIO_PA17);
951 MAKE_PIN(P71, PIOA, PIO_PA18);
952 MAKE_PIN(P72, PIOC, PIO_PC30);
953 MAKE_PIN(P73, PIOA, PIO_PA21);
954 MAKE_PIN(P74, PIOA, PIO_PA25); // MISO
955 MAKE_PIN(P75, PIOA, PIO_PA26); // MOSI
956 MAKE_PIN(P76, PIOA, PIO_PA27); // CLK
957 MAKE_PIN(P77, PIOA, PIO_PA28);
958 MAKE_PIN(P78, PIOB, PIO_PB23); // Unconnected
962 #elif defined(RBL_NRF51822)
964 #define MAKE_PIN(className, pin) \
967 static void Set() { \
968 nrf_gpio_pin_set(pin); \
970 static void Clear() { \
971 nrf_gpio_pin_clear(pin); \
973 static void SetDirRead() { \
974 nrf_gpio_cfg_input(pin, NRF_GPIO_PIN_NOPULL); \
976 static void SetDirWrite() { \
977 nrf_gpio_cfg_output(pin); \
979 static uint8_t IsSet() { \
980 return (uint8_t)nrf_gpio_pin_read(pin); \
984 // See: pin_transform.c in RBL nRF51822 SDK
985 MAKE_PIN(P0, Pin_nRF51822_to_Arduino(D0));
986 MAKE_PIN(P1, Pin_nRF51822_to_Arduino(D1));
987 MAKE_PIN(P2, Pin_nRF51822_to_Arduino(D2));
988 MAKE_PIN(P3, Pin_nRF51822_to_Arduino(D3));
989 MAKE_PIN(P4, Pin_nRF51822_to_Arduino(D4));
990 MAKE_PIN(P5, Pin_nRF51822_to_Arduino(D5));
991 MAKE_PIN(P6, Pin_nRF51822_to_Arduino(D6));
992 MAKE_PIN(P7, Pin_nRF51822_to_Arduino(D7));
993 MAKE_PIN(P8, Pin_nRF51822_to_Arduino(D8));
994 MAKE_PIN(P9, Pin_nRF51822_to_Arduino(D9)); // INT
995 MAKE_PIN(P10, Pin_nRF51822_to_Arduino(D10)); // SS
996 MAKE_PIN(P11, Pin_nRF51822_to_Arduino(D11));
997 MAKE_PIN(P12, Pin_nRF51822_to_Arduino(D12));
998 MAKE_PIN(P13, Pin_nRF51822_to_Arduino(D13));
999 MAKE_PIN(P14, Pin_nRF51822_to_Arduino(D14));
1000 MAKE_PIN(P15, Pin_nRF51822_to_Arduino(D15));
1001 MAKE_PIN(P17, Pin_nRF51822_to_Arduino(D17)); // MISO
1002 MAKE_PIN(P18, Pin_nRF51822_to_Arduino(D18)); // MOSI
1003 MAKE_PIN(P16, Pin_nRF51822_to_Arduino(D16)); // CLK
1004 MAKE_PIN(P19, Pin_nRF51822_to_Arduino(D19));
1005 MAKE_PIN(P20, Pin_nRF51822_to_Arduino(D20));
1006 MAKE_PIN(P21, Pin_nRF51822_to_Arduino(D21));
1007 MAKE_PIN(P22, Pin_nRF51822_to_Arduino(D22));
1008 MAKE_PIN(P23, Pin_nRF51822_to_Arduino(D23));
1009 MAKE_PIN(P24, Pin_nRF51822_to_Arduino(D24));
1014 #error "Please define board in avrpins.h"
1018 #elif defined(__ARDUINO_X86__) // Intel Galileo, Intel Galileo 2 and Intel Edison
1020 #include <avr/pgmspace.h>
1022 // Pointers are 32 bits on x86
1023 #define pgm_read_pointer(p) pgm_read_dword(p)
1025 #if PLATFORM_ID == 0xE1 // Edison platform id
1026 #define pinToFastPin(pin) 1 // As far as I can tell all pins can be used as fast pins
1029 // Pin 2 and 3 on the Intel Galileo supports a higher rate,
1030 // so it is recommended to use one of these as the SS pin.
1032 #define MAKE_PIN(className, pin) \
1035 static void Set() { \
1036 fastDigitalWrite(pin, HIGH); \
1038 static void Clear() { \
1039 fastDigitalWrite(pin, LOW); \
1041 static void SetDirRead() { \
1042 if (pinToFastPin(pin)) \
1043 pinMode(pin, INPUT_FAST); \
1045 pinMode(pin, INPUT); \
1047 static void SetDirWrite() { \
1048 if (pinToFastPin(pin)) \
1049 pinMode(pin, OUTPUT_FAST); \
1051 pinMode(pin, OUTPUT); \
1053 static uint8_t IsSet() { \
1054 return fastDigitalRead(pin); \
1072 MAKE_PIN(P14, 14); // A0
1073 MAKE_PIN(P15, 15); // A1
1074 MAKE_PIN(P16, 16); // A2
1075 MAKE_PIN(P17, 17); // A3
1076 MAKE_PIN(P18, 18); // A4
1077 MAKE_PIN(P19, 19); // A5
1081 #elif defined(__MIPSEL__)
1082 // MIPSEL (MIPS architecture using a little endian byte order)
1085 #define pgm_read_pointer(p) pgm_read_dword(p)
1087 #define MAKE_PIN(className, pin) \
1090 static void Set() { \
1091 digitalWrite(pin, HIGH);\
1093 static void Clear() { \
1094 digitalWrite(pin, LOW); \
1096 static void SetDirRead() { \
1097 pinMode(pin, INPUT); \
1099 static void SetDirWrite() { \
1100 pinMode(pin, OUTPUT); \
1102 static uint8_t IsSet() { \
1103 return digitalRead(pin); \
1107 // 0 .. 13 - Digital pins
1108 MAKE_PIN(P0, 0); // RX
1109 MAKE_PIN(P1, 1); // TX
1118 MAKE_PIN(P10, 10); //
1119 MAKE_PIN(P11, 11); //
1120 MAKE_PIN(P12, 12); //
1121 MAKE_PIN(P13, 13); //
1126 #error "Please define board in avrpins.h"
1130 #endif //_avrpins_h_