4 Model 100 6019273 50-key (grid layout)
5 Model 200 6019284 62-key Alpha(60% layout)
6 Model 300 6019303 77-key Expanded Alpha
7 Model 400 6020218 107-key Full key
11 The IBM 4704: lots of pictures and info
12 http://kishy.dyndns.org/?p=648#more-648
15 http://ed-thelen.org/comp-hist/IBM-ProdAnn/4700.pdf
19 4704 Keyboard Protocol
20 ======================
21 On powering up the keyboard sends keyboard id; A3h for 6019284(62-key), for example.
22 After that firmware enters FC command mode and waits for parameter data from host
23 so that it doesn't send any scancode until you send 'FF'(End of FC command).
28 Keyboard Plug from front
39 N No connection/No pin.
44 Data bits are LSB first and Pairty is odd. Clock has around 60us high and 30us low part.
46 ____ __ __ __ __ __ __ __ __ __ ________
47 Clock \____/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
48 ____ ____ ____ ____ ____ ____ ____ ____ ____ ____
49 Data ____/ X____X____X____X____X____X____X____X____X____X________
50 Start 0 1 2 3 4 5 6 7 P Stop
52 Start bit: can be long as 300-350us.
53 Inhibit: Pull Data line down to inhibit keyboard to send.
54 Timing: Host reads bit while Clock is hi.
55 Stop bit: Keyboard pulls down Data line to lo after 9th clock.
60 Data bits are LSB first and Pairty is odd. Clock has around 60us high and 30us low part.
62 ____ __ __ __ __ __ __ __ __ __ ________
63 Clock \______/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/ \_/
64 ^ ____ ____ ____ ____ ____ ____ ____ ____ ____ ____ ___
65 Data ____|__/ X____X____X____X____X____X____X____X____X____X \___
66 | Start 0 1 2 3 4 5 6 7 P Stop
69 Start bit: can be long as 300-350us.
70 Request: Host pulls Clock line down to request to send a command.
71 Timing: After Request keyboard pull up Data and down Clock line to low for start bit.
72 After request host release Clock line once Data line becomes hi.
73 Host wirtes a bit while Clock is hi and Keyboard reads while low.
74 Stop bit: Host releases or pulls up Data line to hi after 9th clock and waits for keybaord pull down the line to lo.
79 Keyboard doesn't send Break code for all keys except for Alt by default.
82 ,-----------------------------------------------------------.
83 | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|???|BS |
84 |-----------------------------------------------------------|
85 |Tab | Q| W| E| R| T| Y| U| I| O| P| ¢| \| PD2|
86 |-----------------------------------------------------------|
87 |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| {}| PD3|
88 |-----------------------------------------------------------|
89 |Shif| <>| Z| X| C| V| B| N| M| ,| ,| /|???|Shift |
90 |-----------------------------------------------------------|
91 |Reset|blk|Alt | Space |Alt |blk|Enter|
92 `-----------------------------------------------------------'
93 +----------+---------------------+----------+----------+
94 |` 00|PD1 04|Caps 20|LShift 30|Reset 31|
95 |1 18|q 05|a 21|<> 3E|Rblank 41|
96 |2 19|w 06|s 22|z 32|Alt 3F|
97 |3 1A|e 13|d 23|x 33|Space 40|
98 |4 10|r 14|f 24|c 34|Alt 3F|
99 |5 11|t 15|g 25|v 35|Lblank 42|
100 |6 12|y 16|h 26|b 36|Enter 2F|
101 |7 08|u 17|j 27|n 37| |
102 |8 09|i 01|k 28|m 38| |
103 |9 0A|o 02|l 29|, 39| |
104 |0 0F|p 03|; 2A|. 3A| |
105 |- 1F|¢ 1B|' 2B|/ 3B| |
106 |= 0D|\ 1C|{} 2C|??? 3C| |
107 |??? 0C|PD2 1D|PD3 2D|RShift 3D| |
109 +----------+---------------------+----------+----------+
110 Bit7 is 'press flag' which set 1 on press and 0 on release when break code is enabled.
112 NOTE: When break code is enabled the key sends scancode with setting 7th bit on press
113 and without it on release. That is, '`' sends 80h on press and 00h on release.
120 FD Buzzer stop?(00edh)
121 FC Set Key flag(00f6h)
128 FF Not exist. [Outgoing buffer cannot have FFh(00h in fact)]
129 FE Overflow(key event/receive data) at 00c5h, 0346h
130 FE Memory test error at 0224h
131 FD Command out of bound at 00d8h
133 7E Read/Parity error in receive from host at 00bch
136 Set Key flag command(FC)
137 ------------------------
138 After 'Power on Reset' firmware enters this command mode and waits for data from host,
139 so that you don't need to send 'FC' and it doesn't send any scancode until you send 'FF'.
145 | `-----`--- scan code
146 `------------- enable bit(0: enable repeat, 1: enable break)
148 00-77 Enable repeat(78-7F: invalid scancode)
149 80-F7 Enable break(F8-FF: invalid scancode)
150 FE Resend(011ah) no need to use
151 FF End(0114h) exits FC command mode.
153 Response from keyboard:
154 FD Out of bound - Invalid scancode
157 To enable break code of all keys.