1 # Target file name (without extension).
4 # Directory common source filess exist
5 TMK_DIR = ../../tmk_core
7 # Directory keyboard dependent files exist
10 # keyboard dependent files
17 # MCU name, you MUST set this to match the board you are using
18 # type "make clean" after changing this, so all files will be rebuilt
19 #MCU = at90usb162 # Teensy 1.0
20 #MCU = atmega32u4 # Teensy 2.0
21 #MCU = at90usb646 # Teensy++ 1.0
22 #MCU = at90usb1286 # Teensy++ 2.0
23 MCU = atmega32u2 # TMK converter
26 # Processor frequency.
27 # Normally the first thing your program should do is set the clock prescaler,
28 # so your program will run at the correct speed. You should also set this
29 # variable to same clock speed. The _delay_ms() macro uses this, and many
30 # examples use this variable to calculate timings. Do not add a "UL" here.
37 # Target architecture (see library "Board Types" documentation).
40 # Input clock frequency.
41 # This will define a symbol, F_USB, in all source code files equal to the
42 # input clock frequency (before any prescaling is performed) in Hz. This value may
43 # differ from F_CPU if prescaling is used on the latter, and is required as the
44 # raw input clock is fed directly to the PLL sections of the AVR for high speed
45 # clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
46 # at the end, this will be done automatically to create a 32-bit value in your
49 # If no clock division is performed on the input clock inside the AVR (via the
50 # CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
53 # Interrupt driven control endpoint task(+60)
54 #OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
57 # Boot Section Size in *bytes*
59 # Teensy++ halfKay 1024
60 # Atmel DFU loader 4096
61 # LUFA bootloader 4096
63 OPT_DEFS += -DBOOTLOADER_SIZE=4096
67 # *Comment out* to disable the options.
69 #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
70 MOUSEKEY_ENABLE = yes # Mouse keys
71 EXTRAKEY_ENABLE = yes # Audio control and System control
72 CONSOLE_ENABLE = yes # Console for debug(+400)
73 COMMAND_ENABLE = yes # Commands for debug and configuration
74 #NKRO_ENABLE = yes # USB Nkey Rollover
80 VPATH += $(TARGET_DIR)
84 include $(TMK_DIR)/protocol.mk
85 include $(TMK_DIR)/protocol/lufa.mk
86 include $(TMK_DIR)/common.mk
87 include $(TMK_DIR)/rules.mk