1 # Target file name (without extension).
4 # Directory common source filess exist
5 TMK_DIR = ../../tmk_core
7 # Directory keyboard dependent files exist
10 # keyboard dependent files
15 SRC := keymap_$(KEYMAP).c $(SRC)
17 SRC := keymap_plain.c $(SRC)
23 # MCU name, you MUST set this to match the board you are using
24 # type "make clean" after changing this, so all files will be rebuilt
25 #MCU = at90usb162 # Teensy 1.0
26 MCU = atmega32u4 # Teensy 2.0
27 #MCU = at90usb646 # Teensy++ 1.0
28 #MCU = at90usb1286 # Teensy++ 2.0
31 # Processor frequency.
32 # Normally the first thing your program should do is set the clock prescaler,
33 # so your program will run at the correct speed. You should also set this
34 # variable to same clock speed. The _delay_ms() macro uses this, and many
35 # examples use this variable to calculate timings. Do not add a "UL" here.
39 # Boot Section Size in *bytes*
41 # Teensy++ halfKay 1024
42 # Atmel DFU loader 4096
43 # LUFA bootloader 4096
45 OPT_DEFS += -DBOOTLOADER_SIZE=4096
49 # *Comment out* to disable the options.
51 #BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
52 MOUSEKEY_ENABLE = yes # Mouse keys
53 EXTRAKEY_ENABLE = yes # Audio control and System control
54 CONSOLE_ENABLE = yes # Console for debug(+400)
55 COMMAND_ENABLE = yes # Commands for debug and configuration
56 NKRO_ENABLE = yes # USB Nkey Rollover
61 #PS2_USE_USART = yes # uses hardware USART engine for PS/2 signal receive(recomened)
62 #PS2_USE_INT = yes # uses external interrupt for falling edge of PS/2 clock pin
63 PS2_USE_BUSYWAIT = yes # uses primitive reference code
67 VPATH += $(TARGET_DIR)
71 include $(TMK_DIR)/protocol.mk
72 include $(TMK_DIR)/protocol/pjrc.mk
73 include $(TMK_DIR)/common.mk
74 include $(TMK_DIR)/rules.mk