1 # Target file name (without extension).
4 # Directory common source filess exist
7 # Directory keyboard dependent files exist
10 # keyboard dependent files
11 TARGET_SRC = main_vusb.c \
16 CONFIG_H = config_vusb.h
19 # V-USB debug level: To use ps2_usart.c level must be 0
20 # ps2_usart.c requires USART to receive PS/2 signal.
21 OPT_DEFS = -DDEBUG_LEVEL=0
24 # MCU name, you MUST set this to match the board you are using
25 # type "make clean" after changing this, so all files will be rebuilt
26 #MCU = at90usb162 # Teensy 1.0
27 #MCU = atmega32u4 # Teensy 2.0
28 #MCU = at90usb646 # Teensy++ 1.0
29 #MCU = at90usb1286 # Teensy++ 2.0
33 # Processor frequency.
34 # Normally the first thing your program should do is set the clock prescaler,
35 # so your program will run at the correct speed. You should also set this
36 # variable to same clock speed. The _delay_ms() macro uses this, and many
37 # examples use this variable to calculate timings. Do not add a "UL" here.
42 # comment out to disable the options.
44 MOUSEKEY_ENABLE = yes # Mouse keys
45 #USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System control)
46 #USB_NKRO_ENABLE = yes # USB Nkey Rollover
50 #---------------- Programming Options --------------------------
52 # Type: avrdude -c ? to get a full listing.
53 AVRDUDE_PROGRAMMER = usbasp
55 AVRDUDE_WRITE_FLASH = -U flash:w:$(TARGET).hex
56 #AVRDUDE_WRITE_EEPROM = -U eeprom:w:$(TARGET).eep
58 # Uncomment the following if you want avrdude's erase cycle counter.
59 # Note that this counter needs to be initialized first using -Yn,
61 #AVRDUDE_ERASE_COUNTER = -y
63 # Uncomment the following if you do /not/ wish a verification to be
64 # performed after programming the device.
65 #AVRDUDE_NO_VERIFY = -V
67 # Increase verbosity level. Please use this when submitting bug
68 # reports about avrdude. See <http://savannah.nongnu.org/projects/avrdude>
69 # to submit bug reports.
70 #AVRDUDE_VERBOSE = -v -v
72 #AVRDUDE_FLAGS = -p $(MCU) -P $(AVRDUDE_PORT) -c $(AVRDUDE_PROGRAMMER)
73 AVRDUDE_FLAGS = -p $(MCU) -c $(AVRDUDE_PROGRAMMER)
74 AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
75 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
76 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
78 PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
82 include $(COMMON_DIR)/Makefile.vusb
83 include $(COMMON_DIR)/Makefile.common