3 * I'm not sure what the Magic + H does.
4 Is this a menu that will pop up regardless of what platform and program is open?
6 Yes, this is sort of debugging.
7 Use PJRC's [hid_listen](https://www.pjrc.com/teensy/hid_listen.html) to see debug messages.
11 * I would like to configure my leds to indicate the active layer.
12 I read that can be done, but I haven't seen an example for this firmware.
13 Can someone please post an example or a link?
15 TMK for Ergodox have support for seven (!) led's:
17 - three on left (see http://geekhack.org/index.php?topic=22780.msg873819#msg873819 for more details)
18 - Teensy onboard led as well
20 Any of these leds can be used as layer indicator or NumLock/CapsLock/ScrollLock led.
22 [Here is example](https://github.com/cub-uanic/tmk_keyboard/blob/cub_layout/keyboard/ergodox/matrix.c#L121-167)
23 how you can assign some meaning to each led.
24 In this code only left leds are used to show layers, but you can
25 [change `led_set()`](https://github.com/cub-uanic/tmk_keyboard/blob/cub_layout/keyboard/ergodox/led.c)
26 and do anything you want with all leds.
30 Q: Where to get binaries?
33 Q: Where to get sources?
42 description of layouts in base firmware binaries
47 - [ ] Flash NumLock led only when "numpad" layer is active
48 - [ ] Command (in terms of IS_COMMAND) to switch to no-leds mode
49 - [ ] Increase count of ACTION keys
50 - [ ] Fix command_state() onboard led: it should flash only when kbd in some specific mode (CONSOLE || MOUSE)
51 - [ ] ergodox_blink_all_leds() should save current state of leds, and restore after blink. initial state of all leds == off
52 - [ ] add support for pseudo-backlight (reversed LEDs) + docs/photo
53 - [ ] command to debug all LEDs (on/off/blink)
54 - [ ] proper (in-core) implementation of DEBUG_MATRIX_SCAN_RATE (non-Ergodox specific)
55 - [ ] proper (in-core) support for per-layer fn_actions[]