2 Copyright 2011 Jun Wako <wakojun@gmail.com>
4 This program is free software: you can redistribute it and/or modify
5 it under the terms of the GNU General Public License as published by
6 the Free Software Foundation, either version 2 of the License, or
7 (at your option) any later version.
9 This program is distributed in the hope that it will be useful,
10 but WITHOUT ANY WARRANTY; without even the implied warranty of
11 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
12 GNU General Public License for more details.
14 You should have received a copy of the GNU General Public License
15 along with this program. If not, see <http://www.gnu.org/licenses/>.
22 #define VENDOR_ID 0xFEED
23 #define PRODUCT_ID 0xCAFE
24 #define DEVICE_VER 0x0104
25 #define MANUFACTURER t.m.k.
26 #define PRODUCT HHKB mod
27 #define DESCRIPTION t.m.k. keyboard firmware for HHKB mod
35 /* key combination for command */
36 #define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))
39 /* period of tapping(ms) */
40 #define TAPPING_TERM 300
41 /* tap count needed for toggling a feature */
42 #define TAPPING_TOGGLE 5
43 /* Oneshot timeout(ms) */
44 #define ONESHOT_TIMEOUT 300
46 /* Boot Magic salt key: Space */
47 #define BOOTMAGIC_KEY_SALT KC_FN6
51 * Hardware Serial(UART)
52 * Baud rate are calculated with round off(+0.5).
54 #ifdef __AVR_ATmega32U4__
55 /* iom32u4.h has no definition of UCSR1D. copy from iom32u2.h */
56 #define UCSR1D _SFR_MEM8(0xCB)
60 #define SERIAL_UART_BAUD 115200
61 #define SERIAL_UART_DATA UDR1
62 #define SERIAL_UART_UBRR ((F_CPU/(16.0*SERIAL_UART_BAUD)-1+0.5))
63 #define SERIAL_UART_RXD_VECT USART1_RX_vect
64 #define SERIAL_UART_TXD_READY (UCSR1A&(1<<UDRE1))
65 #define SERIAL_UART_INIT() do { \
66 UBRR1L = (uint8_t) SERIAL_UART_UBRR; /* baud rate */ \
67 UBRR1H = ((uint16_t)SERIAL_UART_UBRR>>8); /* baud rate */ \
68 UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
69 UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
70 UCSR1C |= (0<<UPM11) | (0<<UPM10); /* parity: none(00), even(01), odd(11) */ \
71 UCSR1D |= (0<<RTSEN) | (0<<CTSEN); /* RTS, CTS */ \
75 #error "USART configuration is needed."
80 * Feature disable options
81 * These options are also useful to firmware size reduction.
83 /* disable debug print */
89 /* disable action features */
90 //#define NO_ACTION_LAYER
91 //#define NO_ACTION_TAPPING
92 //#define NO_ACTION_ONESHOT
93 //#define NO_ACTION_MACRO
94 //#define NO_ACTION_FUNCTION