m0110_usb/README.md

   1 M0110/M0110A to USB keyboard converter
   2 ======================================
   3 This firmware converts the protocol of Apple Macintosh keyboard M0110/M0110A into USB.
   4 Target board of this project is [PJRC Teensy](http://www.pjrc.com/teensy/), though,
   5 you can use other board with USB AVR like `ATmega32U4` and `AT90USB`.
   6
   7 ![M0110](https://github.com/tmk/tmk_keyboard/raw/master/m0110_usb/doc/m0110.jpg)
   8
   9 M0110A support was contributed by [skagon@github](https://github.com/skagon).
  10
  11
  12
  13 Connection
  14 ----------
  15 You need 4P4C plug and cable to connect Teensy or other AVR dev board into the keyboard.
  16 Teensy port `PF0` is assigned for `CLOCK` line and `PF1` for `DATA` by default,
  17 you can change pin configuration with editing *config.h*.
  18
  19 You can find 4P4C plugs on telephone handset cable. Note that it is *crossover* connection
  20 while Macintosh keyboard cable is *straight*.
  21
  22 [![Conection](http://i.imgur.com/vJoVOm.jpg)](http://i.imgur.com/vJoVO.jpg)
  23
  24 In this pic:
  25
  26 1. `GND`(Black)
  27 2. `CLOCK`(Red)
  28 3. `DATA`(Green)
  29 4. `+5V`(Yellow)
  30
  31 Not that wire colors may vary in your cable.
  32
  33
  34 ### Pinout
  35 - <http://pinouts.ru/Inputs/MacKeyboard_pinout.shtml>
  36 - <http://en.wikipedia.org/wiki/Modular_connector#4P4C>
  37
  38 ![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png)
  39
  40
  41 ### Pull-up Registor
  42 You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular
  43 when you have long or coiled cable. 1k-10k Ohm will be OK for this purpose.
  44 In some cases MCU can't read signal from keyboard correctly without pull-up resistors.
  45
  46
  47
  48 Building Frimware
  49 -----------------
  50 To compile firmware you need AVR GCC. You can use [WinAVR](http://winavr.sourceforge.net/) on Windows.
  51 You can edit *Makefile* and *config.h* to change compile options and pin configuration.
  52
  53     $ git clone ... (or download source)
  54     $ cd m0110_usb
  55     $ make
  56
  57 and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html).
  58
  59
  60
  61 Keymap
  62 ------
  63 You can change keymaps by editing *keymap.c*.
  64
  65 ### M0110
  66 #### *Default*
  67     ,---------------------------------------------------------.
  68     |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs|
  69     |---------------------------------------------------------|
  70     |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|  \|
  71     |---------------------------------------------------------|
  72     |Fn0   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return|
  73     |---------------------------------------------------------|
  74     |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift   |
  75     `---------------------------------------------------------'
  76          |Ctr|Alt |         Space               |Gui |Ctr|
  77          `-----------------------------------------------'
  78     You can register Esc by hitting(press&release) Fn0 quickly.
  79
  80 #### *HHKB/WASD cursor Layer(Fn0)*
  81     ,---------------------------------------------------------.
  82     |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet|
  83     |---------------------------------------------------------|
  84     |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |Ins|  \|
  85     |---------------------------------------------------------|
  86     |Fn0   |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Return|
  87     |---------------------------------------------------------|
  88     |Shift   |End|   |PgD|   |VoD|VoU|Mut|End|PgD|Dow|Shift   |
  89     `---------------------------------------------------------'
  90          |Ctr|Alt |         Space               |Gui |Ctr|
  91          `-----------------------------------------------'
  92
  93 ### M0110A
  94 #### *Default*
  95     ,---------------------------------------------------------. ,---------------.
  96     |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backs| |Gui|  =|  /|  *|
  97     |---------------------------------------------------------| |---------------|
  98     |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|   | |  7|  8|  9|  -|
  99     |-----------------------------------------------------'   | |---------------|
 100     |Fn0   |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return| |  4|  5|  6|  +|
 101     |---------------------------------------------------------| |---------------|
 102     |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shft|Up | |  1|  2|  3|   |
 103     |---------------------------------------------------------| |-----------|Ent|
 104     |Ctrl |Alt    |         Space             |  \|Lft|Rgt|Dn | |      0|  .|   |
 105     `---------------------------------------------------------' `---------------'
 106 #### *HHKB/WASD cursor Layer(Fn0)*
 107     ,---------------------------------------------------------. ,---------------.
 108     |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk|Mb1|Mb3|Mb2|
 109     |---------------------------------------------------------| |---------------|
 110     |Caps |Hom| Up|PgU|   |   |   |   |Psc|Slk|Pau|Up |Ins|   | |MwD|McU|MwU|MwU|
 111     |-----------------------------------------------------'   | |---------------|
 112     |Fn0   |Lef|Dow|Rig|   |   |   |   |Hom|PgU|Lef|Rig|Return| |McL|McD|McR|MwD|
 113     |---------------------------------------------------------| |---------------|
 114     |Shift   |End|   |PgD|   |VoD|VoU|Mut|End|PgD|Dow|Shif|Up | |MwL|McD|MwR|   |
 115     |---------------------------------------------------------| |-----------|Mb2|
 116     |Ctrl |Alt    |         Space        |Gui |  \|Lft|Rgt|Dn | |    Mb1|Mb3|   |
 117     `---------------------------------------------------------' `---------------'
 118
 119
 120
 121 Debug
 122 -----
 123 You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output.
 124
 125 The converter has some functions for debug, press `Alt+Gui+H` simultaneously to get help.
 126 These function is totally undocumented, tentative, inconsistent and buggy.