3 * This file contains special DoxyGen information for the generation of the main page and other special
\r
4 * documentation pages. It is not a project source file.
\r
8 * \brief Platform specific drivers.
\r
10 * This folder contains platform specific drivers and defines for various supported architectures. These may or may
\r
11 * not be used in a LUFA application, and are provided for convenience purposes.
\r
14 * \brief Library hardware and software drivers.
\r
16 * This folder contains all the library hardware and software drivers for each supported board, architecture and
\r
17 * microcontroller model.
\r
20 * \brief Miscellaneous driver files.
\r
22 * This folder contains drivers for aspects other than the USB interface, board hardware or microcontroller peripherals.
\r
24 * \dir Drivers/Peripheral
\r
25 * \brief Microcontroller peripheral driver files.
\r
27 * This folder contains drivers for various low level microcontroller peripherals, usually located on the microcontroller
\r
28 * die within the same physical chip.
\r
31 * \brief USB controller peripheral driver files.
\r
33 * This folder contains the complete LUFA USB stack and controller files, including the core driver and stack, as well
\r
34 * as the USB class driver implementations.
\r
36 * \dir Drivers/USB/Core
\r
37 * \brief Core USB driver files.
\r
39 * This folder contains the core USB stack and controller driver files, to correctly implement USB functionality on the
\r
40 * target architecture and microcontroller model. This
\r
42 * \dir Drivers/USB/Class
\r
43 * \brief USB Class helper driver files.
\r
45 * This folder contains drivers for implementing functionality of standardized USB classes. These are not used directly by the library,
\r
46 * but provide a standard and library-maintained way of implementing functionality from some of the defined USB classes without extensive
\r
47 * development effort. Is is recommended that these drivers be used where possible to reduce maintenance of user applications.
\r
49 * \dir Drivers/USB/Class/Device
\r
50 * \brief USB Device Class helper driver files.
\r
52 * Device mode drivers for the standard USB classes.
\r
54 * \dir Drivers/USB/Class/Host
\r
55 * \brief USB Host Class helper driver files.
\r
57 * Host mode drivers for the standard USB classes.
\r
59 * \dir Drivers/Board
\r
60 * \brief Board hardware driver files.
\r
62 * This folder contains drivers for interfacing with the physical hardware on supported commercial boards, primarily from
\r
63 * the Atmel corporation. Header files in this folder should be included in user applications requiring the functionality of
\r
64 * hardware placed on supported boards.
\r
66 * \dir CodeTemplates
\r
67 * \brief Code templates for use in LUFA powered applications.
\r
69 * This contains code templates for board drivers, sample LUFA project makefiles and other similar templates that can be copied into
\r
70 * a LUFA powered application and modified to speed up development.
\r
72 * \dir CodeTemplates/DriverStubs
\r
73 * \brief Driver stub header files for custom boards, to allow the LUFA board drivers to operate.
\r
75 * This contains stub files for the LUFA board drivers. If the LUFA board drivers are used with board hardware other than those
\r
76 * directly supported by the library, the BOARD parameter of the application's makefile can be set to "USER", and these stub files
\r
77 * copied to the "/Board/" directory of the application's folder. When fleshed out with working driver code for the custom board,
\r
78 * the corresponding LUFA board APIs will work correctly with the non-standard board hardware.
\r