2 * Copyright 2012 Jun Wako <wakojun@gmail.com>
3 * This file is based on:
4 * LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
5 * LUFA-120219/Demos/Device/Lowlevel/GenericHID
10 Copyright (C) Dean Camera, 2012.
12 dean [at] fourwalledcubicle [dot] com
17 Copyright 2012 Dean Camera (dean [at] fourwalledcubicle [dot] com)
18 Copyright 2010 Denver Gingerich (denver [at] ossguy [dot] com)
20 Permission to use, copy, modify, distribute, and sell this
21 software and its documentation for any purpose is hereby granted
22 without fee, provided that the above copyright notice appear in
23 all copies and that both that the copyright notice and this
24 permission notice and warranty disclaimer appear in supporting
25 documentation, and that the name of the author not be used in
26 advertising or publicity pertaining to distribution of the
27 software without specific, written prior permission.
29 The author disclaim all warranties with regard to this
30 software, including all implied warranties of merchantability
31 and fitness. In no event shall the author be liable for any
32 special, indirect or consequential damages or any damages
33 whatsoever resulting from loss of use, data or profits, whether
34 in an action of contract, negligence or other tortious action,
35 arising out of or in connection with the use or performance of
41 #include "host_driver.h"
47 #ifdef SLEEP_LED_ENABLE
48 #include "sleep_led.h"
52 #include "descriptor.h"
55 static uint8_t idle_duration = 0;
56 static uint8_t protocol_report = 1;
57 static uint8_t keyboard_led_stats = 0;
59 static report_keyboard_t keyboard_report_sent;
63 static uint8_t keyboard_leds(void);
64 static void send_keyboard(report_keyboard_t *report);
65 static void send_mouse(report_mouse_t *report);
66 static void send_system(uint16_t data);
67 static void send_consumer(uint16_t data);
68 host_driver_t lufa_driver = {
77 /*******************************************************************************
79 ******************************************************************************/
81 static void Console_Task(void)
83 /* Device must be connected and configured for the task to run */
84 if (USB_DeviceState != DEVICE_STATE_Configured)
87 uint8_t ep = Endpoint_GetCurrentEndpoint();
90 // TODO: impl receivechar()/recvchar()
91 Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM);
93 /* Check to see if a packet has been sent from the host */
94 if (Endpoint_IsOUTReceived())
96 /* Check to see if the packet contains data */
97 if (Endpoint_IsReadWriteAllowed())
99 /* Create a temporary buffer to hold the read in report from the host */
100 uint8_t ConsoleData[CONSOLE_EPSIZE];
102 /* Read Console Report Data */
103 Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL);
105 /* Process Console Report Data */
106 //ProcessConsoleHIDReport(ConsoleData);
109 /* Finalize the stream transfer to send the last packet */
115 Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
116 if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
117 Endpoint_SelectEndpoint(ep);
122 while (Endpoint_IsReadWriteAllowed())
125 // flash senchar packet
126 if (Endpoint_IsINReady()) {
130 Endpoint_SelectEndpoint(ep);
133 static void Console_Task(void)
139 /*******************************************************************************
141 ******************************************************************************/
143 * Event Order of Plug in:
144 * 0) EVENT_USB_Device_Connect
145 * 1) EVENT_USB_Device_Suspend
146 * 2) EVENT_USB_Device_Reset
147 * 3) EVENT_USB_Device_Wake
149 void EVENT_USB_Device_Connect(void)
151 led_set(0x1f); // all on
154 void EVENT_USB_Device_Disconnect(void)
158 void EVENT_USB_Device_Reset(void)
162 void EVENT_USB_Device_Suspend()
164 #ifdef SLEEP_LED_ENABLE
169 void EVENT_USB_Device_WakeUp()
171 suspend_wakeup_init();
173 #ifdef SLEEP_LED_ENABLE
176 led_set(host_keyboard_leds());
179 void EVENT_USB_Device_StartOfFrame(void)
184 /** Event handler for the USB_ConfigurationChanged event.
185 * This is fired when the host sets the current configuration of the USB device after enumeration.
187 #if LUFA_VERSION_INTEGER < 0x120730
189 #define ENDPOINT_CONFIG(epnum, eptype, epdir, epsize, epbank) Endpoint_ConfigureEndpoint(epnum, eptype, epdir, epsize, epbank)
191 /* new API >= 120730 */
192 #define ENDPOINT_BANK_SINGLE 1
193 #define ENDPOINT_BANK_DOUBLE 2
194 #define ENDPOINT_CONFIG(epnum, eptype, epdir, epsize, epbank) Endpoint_ConfigureEndpoint((epdir) | (epnum) , eptype, epsize, epbank)
196 void EVENT_USB_Device_ConfigurationChanged(void)
198 bool ConfigSuccess = true;
200 /* Setup Keyboard HID Report Endpoints */
201 ConfigSuccess &= ENDPOINT_CONFIG(KEYBOARD_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
202 KEYBOARD_EPSIZE, ENDPOINT_BANK_SINGLE);
205 /* Setup Mouse HID Report Endpoint */
206 ConfigSuccess &= ENDPOINT_CONFIG(MOUSE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
207 MOUSE_EPSIZE, ENDPOINT_BANK_SINGLE);
210 #ifdef EXTRAKEY_ENABLE
211 /* Setup Extra HID Report Endpoint */
212 ConfigSuccess &= ENDPOINT_CONFIG(EXTRAKEY_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
213 EXTRAKEY_EPSIZE, ENDPOINT_BANK_SINGLE);
216 #ifdef CONSOLE_ENABLE
217 /* Setup Console HID Report Endpoints */
218 ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
219 CONSOLE_EPSIZE, ENDPOINT_BANK_DOUBLE);
220 ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
221 CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
226 Appendix G: HID Request Support Requirements
228 The following table enumerates the requests that need to be supported by various types of HID class devices.
230 Device type GetReport SetReport GetIdle SetIdle GetProtocol SetProtocol
231 ------------------------------------------------------------------------------------------
232 Boot Mouse Required Optional Optional Optional Required Required
233 Non-Boot Mouse Required Optional Optional Optional Optional Optional
234 Boot Keyboard Required Optional Required Required Required Required
235 Non-Boot Keybrd Required Optional Required Required Optional Optional
236 Other Device Required Optional Optional Optional Optional Optional
238 /** Event handler for the USB_ControlRequest event.
239 * This is fired before passing along unhandled control requests to the library for processing internally.
241 void EVENT_USB_Device_ControlRequest(void)
243 uint8_t* ReportData = NULL;
244 uint8_t ReportSize = 0;
246 /* Handle HID Class specific requests */
247 switch (USB_ControlRequest.bRequest)
249 case HID_REQ_GetReport:
250 if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
252 Endpoint_ClearSETUP();
255 switch (USB_ControlRequest.wIndex) {
256 case KEYBOARD_INTERFACE:
258 ReportData = (uint8_t*)&keyboard_report_sent;
259 ReportSize = sizeof(keyboard_report_sent);
263 /* Write the report data to the control endpoint */
264 Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
269 case HID_REQ_SetReport:
270 if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
274 switch (USB_ControlRequest.wIndex) {
275 case KEYBOARD_INTERFACE:
276 Endpoint_ClearSETUP();
278 while (!(Endpoint_IsOUTReceived())) {
279 if (USB_DeviceState == DEVICE_STATE_Unattached)
282 keyboard_led_stats = Endpoint_Read_8();
285 Endpoint_ClearStatusStage();
293 case HID_REQ_GetProtocol:
294 if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
296 Endpoint_ClearSETUP();
297 while (!(Endpoint_IsINReady()));
298 Endpoint_Write_8(protocol_report);
300 Endpoint_ClearStatusStage();
304 case HID_REQ_SetProtocol:
305 if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
307 Endpoint_ClearSETUP();
308 Endpoint_ClearStatusStage();
310 protocol_report = ((USB_ControlRequest.wValue & 0xFF) != 0x00);
314 case HID_REQ_SetIdle:
315 if (USB_ControlRequest.bmRequestType == (REQDIR_HOSTTODEVICE | REQTYPE_CLASS | REQREC_INTERFACE))
317 Endpoint_ClearSETUP();
318 Endpoint_ClearStatusStage();
320 idle_duration = ((USB_ControlRequest.wValue & 0xFF00) >> 8);
324 case HID_REQ_GetIdle:
325 if (USB_ControlRequest.bmRequestType == (REQDIR_DEVICETOHOST | REQTYPE_CLASS | REQREC_INTERFACE))
327 Endpoint_ClearSETUP();
328 while (!(Endpoint_IsINReady()));
329 Endpoint_Write_8(idle_duration);
331 Endpoint_ClearStatusStage();
338 /*******************************************************************************
340 ******************************************************************************/
341 static uint8_t keyboard_leds(void)
343 return keyboard_led_stats;
346 static void send_keyboard(report_keyboard_t *report)
350 if (USB_DeviceState != DEVICE_STATE_Configured)
353 // TODO: handle NKRO report
354 /* Select the Keyboard Report Endpoint */
355 Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
357 /* Check if Keyboard Endpoint Ready for Read/Write */
358 while (--timeout && !Endpoint_IsReadWriteAllowed()) ;
360 /* Write Keyboard Report Data */
361 Endpoint_Write_Stream_LE(report, sizeof(report_keyboard_t), NULL);
363 /* Finalize the stream transfer to send the last packet */
366 keyboard_report_sent = *report;
369 static void send_mouse(report_mouse_t *report)
374 if (USB_DeviceState != DEVICE_STATE_Configured)
377 /* Select the Mouse Report Endpoint */
378 Endpoint_SelectEndpoint(MOUSE_IN_EPNUM);
380 /* Check if Mouse Endpoint Ready for Read/Write */
381 while (--timeout && !Endpoint_IsReadWriteAllowed()) ;
383 /* Write Mouse Report Data */
384 Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL);
386 /* Finalize the stream transfer to send the last packet */
391 static void send_system(uint16_t data)
395 if (USB_DeviceState != DEVICE_STATE_Configured)
399 .report_id = REPORT_ID_SYSTEM,
402 Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
403 while (--timeout && !Endpoint_IsReadWriteAllowed()) ;
404 Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
408 static void send_consumer(uint16_t data)
412 if (USB_DeviceState != DEVICE_STATE_Configured)
416 .report_id = REPORT_ID_CONSUMER,
419 Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
420 while (--timeout && !Endpoint_IsReadWriteAllowed()) ;
421 Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
426 /*******************************************************************************
428 ******************************************************************************/
429 #ifdef CONSOLE_ENABLE
430 #define SEND_TIMEOUT 5
431 int8_t sendchar(uint8_t c)
433 // Not wait once timeouted.
434 // Because sendchar() is called so many times, waiting each call causes big lag.
435 static bool timeouted = false;
437 if (USB_DeviceState != DEVICE_STATE_Configured)
440 uint8_t ep = Endpoint_GetCurrentEndpoint();
441 Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
442 if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
443 Endpoint_SelectEndpoint(ep);
447 if (timeouted && !Endpoint_IsReadWriteAllowed()) {
448 Endpoint_SelectEndpoint(ep);
454 uint8_t timeout = SEND_TIMEOUT;
455 uint16_t prevFN = USB_Device_GetFrameNumber();
456 while (!Endpoint_IsReadWriteAllowed()) {
457 switch (USB_DeviceState) {
458 case DEVICE_STATE_Unattached:
459 case DEVICE_STATE_Suspended:
462 if (Endpoint_IsStalled()) {
463 Endpoint_SelectEndpoint(ep);
466 if (prevFN != USB_Device_GetFrameNumber()) {
469 Endpoint_SelectEndpoint(ep);
472 prevFN = USB_Device_GetFrameNumber();
478 // send when bank is full
479 if (!Endpoint_IsReadWriteAllowed())
482 Endpoint_SelectEndpoint(ep);
486 int8_t sendchar(uint8_t c)
493 /*******************************************************************************
495 ******************************************************************************/
496 static void SetupHardware(void)
498 /* Disable watchdog if enabled by bootloader/fuses */
499 MCUSR &= ~(1 << WDRF);
502 /* Disable clock division */
503 clock_prescale_set(clock_div_1);
505 // Leonardo needs. Without this USB device is not recognized.
511 USB_Device_EnableSOFEvents();
514 int main(void) __attribute__ ((weak));
519 host_set_driver(&lufa_driver);
520 #ifdef SLEEP_LED_ENABLE
526 while (USB_DeviceState == DEVICE_STATE_Suspended) {
527 suspend_power_down();
528 if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
529 USB_Device_SendRemoteWakeup();
535 #if !defined(INTERRUPT_CONTROL_ENDPOINT)