tmk_core/protocol/lufa/LUFA-git/Bootloaders/HID/makefile

   1 #
   2 #             LUFA Library
   3 #     Copyright (C) Dean Camera, 2014.
   4 #
   5 #  dean [at] fourwalledcubicle [dot] com
   6 #           www.lufa-lib.org
   7 #
   8 # --------------------------------------
   9 #         LUFA Project Makefile.
  10 # --------------------------------------
  11
  12 # Run "make help" for target help.
  13
  14 MCU          = at90usb1287
  15 ARCH         = AVR8
  16 BOARD        = USBKEY
  17 F_CPU        = 8000000
  18 F_USB        = $(F_CPU)
  19 OPTIMIZATION = s
  20 TARGET       = BootloaderHID
  21 SRC          = $(TARGET).c Descriptors.c $(LUFA_SRC_USB)
  22 LUFA_PATH    = ../../LUFA
  23 CC_FLAGS     = -DUSE_LUFA_CONFIG_HEADER -IConfig/
  24 LD_FLAGS     = -Wl,--section-start=.text=$(BOOT_START_OFFSET)
  25
  26 # Flash size and bootloader section sizes of the target, in KB. These must
  27 # match the target's total FLASH size and the bootloader size set in the
  28 # device's fuses.
  29 FLASH_SIZE_KB        := 128
  30 BOOT_SECTION_SIZE_KB := 8
  31
  32 # Bootloader address calculation formulas
  33 # Do not modify these macros, but rather modify the dependent values above.
  34 CALC_ADDRESS_IN_HEX   = $(shell printf "0x%X" $$(( $(1) )) )
  35 BOOT_START_OFFSET     = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) - $(BOOT_SECTION_SIZE_KB)) * 1024 )
  36 BOOT_SEC_OFFSET       = $(call CALC_ADDRESS_IN_HEX, ($(FLASH_SIZE_KB) * 1024) - ($(strip $(1))) )
  37
  38 # Default target
  39 all:
  40
  41 # Include LUFA build script makefiles
  42 include $(LUFA_PATH)/Build/lufa_core.mk
  43 include $(LUFA_PATH)/Build/lufa_sources.mk
  44 include $(LUFA_PATH)/Build/lufa_build.mk
  45 include $(LUFA_PATH)/Build/lufa_cppcheck.mk
  46 include $(LUFA_PATH)/Build/lufa_doxygen.mk
  47 include $(LUFA_PATH)/Build/lufa_avrdude.mk
  48 include $(LUFA_PATH)/Build/lufa_atprogram.mk