tmk_core/tool/mbed/mbed-sdk/libraries/mbed/targets/cmsis/TARGET_STM/TARGET_STM32F1/stm32f1xx_ll_fsmc.c

   1 /**
   2   ******************************************************************************
   3   * @file    stm32f1xx_ll_fsmc.c
   4   * @author  MCD Application Team
   5   * @version V1.0.0
   6   * @date    15-December-2014
   7   * @brief   FSMC Low Layer HAL module driver.
   8   *
   9   *          This file provides firmware functions to manage the following
  10   *          functionalities of the Flexible Static Memory Controller (FSMC) peripheral memories:
  11   *           + Initialization/de-initialization functions
  12   *           + Peripheral Control functions
  13   *           + Peripheral State functions
  14   *
  15   @verbatim
  16   =============================================================================
  17                         ##### FSMC peripheral features #####
  18   =============================================================================
  19     [..] The Flexible static memory controller (FSMC) includes following memory controllers:
  20          (+) The NOR/PSRAM memory controller
  21          (+) The NAND/PC Card memory controller (except STM32F100xE devices)
  22
  23     [..] The FSMC functional block makes the interface with synchronous and asynchronous static
  24          memories and 16-bit PC memory cards. Its main purposes are:
  25          (+) to translate AHB transactions into the appropriate external device protocol.
  26          (+) to meet the access time requirements of the external memory devices.
  27
  28     [..] All external memories share the addresses, data and control signals with the controller.
  29          Each external device is accessed by means of a unique Chip Select. The FSMC performs
  30          only one access at a time to an external device.
  31          The main features of the FSMC controller are the following:
  32           (+) Interface with static-memory mapped devices including:
  33              (++) Static random access memory (SRAM).
  34              (++) NOR Flash memory.
  35              (++) PSRAM (4 memory banks).
  36              (++) 16-bit PC Card compatible devices
  37              (++) Two banks of NAND Flash memory with ECC hardware to check up to 8 Kbytes of
  38                 data
  39           (+) Independent Chip Select control for each memory bank
  40           (+) Independent configuration for each memory bank
  41
  42   @endverbatim
  43   ******************************************************************************
  44   * @attention
  45   *
  46   * <h2><center>&copy; COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
  47   *
  48   * Redistribution and use in source and binary forms, with or without modification,
  49   * are permitted provided that the following conditions are met:
  50   *   1. Redistributions of source code must retain the above copyright notice,
  51   *      this list of conditions and the following disclaimer.
  52   *   2. Redistributions in binary form must reproduce the above copyright notice,
  53   *      this list of conditions and the following disclaimer in the documentation
  54   *      and/or other materials provided with the distribution.
  55   *   3. Neither the name of STMicroelectronics nor the names of its contributors
  56   *      may be used to endorse or promote products derived from this software
  57   *      without specific prior written permission.
  58   *
  59   * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
  60   * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
  61   * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
  62   * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
  63   * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
  64   * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
  65   * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  66   * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
  67   * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
  68   * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  69   *
  70   ******************************************************************************
  71   */
  72
  73 /* Includes ------------------------------------------------------------------*/
  74 #include "stm32f1xx_hal.h"
  75
  76 /** @addtogroup STM32F1xx_HAL_Driver
  77   * @{
  78   */
  79
  80 #if defined (HAL_SRAM_MODULE_ENABLED) || defined(HAL_NOR_MODULE_ENABLED) || defined(HAL_PCCARD_MODULE_ENABLED) || defined(HAL_NAND_MODULE_ENABLED)
  81
  82 #if defined (STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG) || defined(STM32F100xE)
  83
  84 /** @defgroup FSMC_LL FSMC_LL
  85   * @brief FSMC driver modules
  86   * @{
  87   */
  88
  89 /* Private typedef -----------------------------------------------------------*/
  90 /* Private define ------------------------------------------------------------*/
  91 /** @defgroup FSMC_LL_Private_Constants FSMC Low Layer Private Constants
  92   * @{
  93   */
  94
  95 /* ----------------------- FMC registers bit mask --------------------------- */
  96 /* --- PCR Register ---*/
  97 /* PCR register clear mask */
  98 #define PCR_CLEAR_MASK    ((uint32_t)(FSMC_PCRx_PWAITEN | FSMC_PCRx_PTYP    | FSMC_PCRx_PWID  | \
  99                                       FSMC_PCRx_ECCEN   | FSMC_PCRx_TCLR    |                   \
 100                                       FSMC_PCRx_TAR     | FSMC_PCRx_ECCPS))
 101
 102 /* --- SR Register ---*/
 103 /* SR register clear mask */
 104 #define SR_CLEAR_MASK     ((uint32_t)(FSMC_SRx_IRS | FSMC_SRx_ILS | FSMC_SRx_IFS | \
 105                                       FSMC_SRx_IREN | FSMC_SRx_ILEN | FSMC_SRx_IFEN))
 106
 107 /* --- PMEM Register ---*/
 108 /* PMEM register clear mask */
 109 #define PMEM_CLEAR_MASK   ((uint32_t)(FSMC_PMEMx_MEMSETx  | FSMC_PMEMx_MEMWAITx |\
 110                                       FSMC_PMEMx_MEMHOLDx | FSMC_PMEMx_MEMHIZx))
 111
 112 /* --- PATT Register ---*/
 113 /* PATT register clear mask */
 114 #define PATT_CLEAR_MASK   ((uint32_t)(FSMC_PATTx_ATTSETx  | FSMC_PATTx_ATTWAITx |\
 115                                       FSMC_PATTx_ATTHOLDx | FSMC_PATTx_ATTHIZx))
 116
 117 /* --- PIO4 Register ---*/
 118 /* PIO4 register clear mask */
 119 #define PIO4_CLEAR_MASK   ((uint32_t)(FSMC_PIO4_IOSET4    | FSMC_PIO4_IOWAIT4   | \
 120                                       FSMC_PIO4_IOHOLD4   | FSMC_PIO4_IOHIZ4))
 121 /**
 122   * @}
 123   */
 124
 125 /* Private macro -------------------------------------------------------------*/
 126 /** @defgroup FSMC_LL_Private_Macros FSMC Low Layer Private Macros
 127   * @{
 128   */
 129
 130 /**
 131   * @}
 132   */
 133
 134 /* Private variables ---------------------------------------------------------*/
 135 /* Private function prototypes -----------------------------------------------*/
 136 /* Exported functions --------------------------------------------------------*/
 137
 138 /** @defgroup FSMC_LL_Exported_Functions FSMC Low Layer Exported Functions
 139   * @{
 140   */
 141
 142 /** @defgroup FSMC_NORSRAM FSMC NORSRAM Controller functions
 143   * @brief    NORSRAM Controller functions
 144   *
 145   @verbatim
 146   ==============================================================================
 147                    ##### How to use NORSRAM device driver #####
 148   ==============================================================================
 149
 150   [..]
 151     This driver contains a set of APIs to interface with the FSMC NORSRAM banks in order
 152     to run the NORSRAM external devices.
 153
 154     (+) FSMC NORSRAM bank reset using the function FSMC_NORSRAM_DeInit()
 155     (+) FSMC NORSRAM bank control configuration using the function FSMC_NORSRAM_Init()
 156     (+) FSMC NORSRAM bank timing configuration using the function FSMC_NORSRAM_Timing_Init()
 157     (+) FSMC NORSRAM bank extended timing configuration using the function
 158         FSMC_NORSRAM_Extended_Timing_Init()
 159     (+) FSMC NORSRAM bank enable/disable write operation using the functions
 160         FSMC_NORSRAM_WriteOperation_Enable()/FSMC_NORSRAM_WriteOperation_Disable()
 161
 162
 163 @endverbatim
 164   * @{
 165   */
 166
 167 /** @defgroup FSMC_NORSRAM_Group1 Initialization/de-initialization functions
 168   * @brief    Initialization and Configuration functions
 169   *
 170   @verbatim
 171   ==============================================================================
 172               ##### Initialization and de_initialization functions #####
 173   ==============================================================================
 174   [..]
 175     This section provides functions allowing to:
 176     (+) Initialize and configure the FSMC NORSRAM interface
 177     (+) De-initialize the FSMC NORSRAM interface
 178     (+) Configure the FSMC clock and associated GPIOs
 179
 180 @endverbatim
 181   * @{
 182   */
 183
 184 /**
 185   * @brief  Initialize the FSMC_NORSRAM device according to the specified
 186   *         control parameters in the FSMC_NORSRAM_InitTypeDef
 187   * @param  Device: Pointer to NORSRAM device instance
 188   * @param  Init: Pointer to NORSRAM Initialization structure
 189   * @retval HAL status
 190   */
 191 HAL_StatusTypeDef  FSMC_NORSRAM_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_InitTypeDef* Init)
 192 {
 193   /* Check the parameters */
 194   assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
 195   assert_param(IS_FSMC_NORSRAM_BANK(Init->NSBank));
 196   assert_param(IS_FSMC_MUX(Init->DataAddressMux));
 197   assert_param(IS_FSMC_MEMORY(Init->MemoryType));
 198   assert_param(IS_FSMC_NORSRAM_MEMORY_WIDTH(Init->MemoryDataWidth));
 199   assert_param(IS_FSMC_BURSTMODE(Init->BurstAccessMode));
 200   assert_param(IS_FSMC_WAIT_POLARITY(Init->WaitSignalPolarity));
 201   assert_param(IS_FSMC_WRAP_MODE(Init->WrapMode));
 202   assert_param(IS_FSMC_WAIT_SIGNAL_ACTIVE(Init->WaitSignalActive));
 203   assert_param(IS_FSMC_WRITE_OPERATION(Init->WriteOperation));
 204   assert_param(IS_FSMC_WAITE_SIGNAL(Init->WaitSignal));
 205   assert_param(IS_FSMC_EXTENDED_MODE(Init->ExtendedMode));
 206   assert_param(IS_FSMC_ASYNWAIT(Init->AsynchronousWait));
 207   assert_param(IS_FSMC_WRITE_BURST(Init->WriteBurst));
 208
 209   /* Disable NORSRAM Device */
 210   __FSMC_NORSRAM_DISABLE(Device, Init->NSBank);
 211
 212   /* Set NORSRAM device control parameters */
 213   if(Init->MemoryType == FSMC_MEMORY_TYPE_NOR)
 214   {
 215     MODIFY_REG(Device->BTCR[Init->NSBank], \
 216       (FSMC_BCRx_FACCEN                 | FSMC_BCRx_MUXEN       | FSMC_BCRx_MTYP                                        | \
 217       FSMC_BCRx_MWID        | FSMC_BCRx_BURSTEN     | FSMC_BCRx_WAITPOL         | FSMC_BCRx_WRAPMOD | FSMC_BCRx_WAITCFG | \
 218       FSMC_BCRx_WREN        | FSMC_BCRx_WAITEN  | FSMC_BCRx_EXTMOD    | FSMC_BCRx_ASYNCWAIT     | FSMC_BCRx_CBURSTRW),    \
 219       (FSMC_NORSRAM_FLASH_ACCESS_ENABLE | Init->DataAddressMux  | Init->MemoryType                                      | \
 220       Init->MemoryDataWidth | Init->BurstAccessMode | Init->WaitSignalPolarity  | Init->WrapMode    | Init->WaitSignalActive |\
 221       Init->WriteOperation  | Init->WaitSignal  | Init->ExtendedMode  | Init->AsynchronousWait  | Init->WriteBurst )      \
 222       );
 223   }
 224   else
 225   {
 226     MODIFY_REG(Device->BTCR[Init->NSBank], \
 227       (FSMC_BCRx_FACCEN                  | FSMC_BCRx_MUXEN      | FSMC_BCRx_MTYP                                        | \
 228       FSMC_BCRx_MWID        | FSMC_BCRx_BURSTEN     | FSMC_BCRx_WAITPOL         | FSMC_BCRx_WRAPMOD | FSMC_BCRx_WAITCFG | \
 229       FSMC_BCRx_WREN        | FSMC_BCRx_WAITEN  | FSMC_BCRx_EXTMOD    | FSMC_BCRx_ASYNCWAIT     | FSMC_BCRx_CBURSTRW),    \
 230       (FSMC_NORSRAM_FLASH_ACCESS_DISABLE | Init->DataAddressMux | Init->MemoryType                                      | \
 231       Init->MemoryDataWidth | Init->BurstAccessMode | Init->WaitSignalPolarity  | Init->WrapMode    | Init->WaitSignalActive |\
 232       Init->WriteOperation  | Init->WaitSignal  | Init->ExtendedMode  | Init->AsynchronousWait  | Init->WriteBurst )      \
 233       );
 234   }
 235
 236   return HAL_OK;
 237 }
 238
 239
 240 /**
 241   * @brief  DeInitialize the FSMC_NORSRAM peripheral
 242   * @param  Device: Pointer to NORSRAM device instance
 243   * @param  ExDevice: Pointer to NORSRAM extended mode device instance
 244   * @param  Bank: NORSRAM bank number
 245   * @retval HAL status
 246   */
 247 HAL_StatusTypeDef FSMC_NORSRAM_DeInit(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_EXTENDED_TypeDef *ExDevice, uint32_t Bank)
 248 {
 249   /* Check the parameters */
 250   assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
 251   assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(ExDevice));
 252   assert_param(IS_FSMC_NORSRAM_BANK(Bank));
 253
 254   /* Disable the FSMC_NORSRAM device */
 255   __FSMC_NORSRAM_DISABLE(Device, Bank);
 256
 257   /* De-initialize the FSMC_NORSRAM device */
 258   /* FSMC_NORSRAM_BANK1 */
 259   if(Bank == FSMC_NORSRAM_BANK1)
 260   {
 261     Device->BTCR[Bank] = 0x000030DB;
 262   }
 263   /* FSMC_NORSRAM_BANK2, FSMC_NORSRAM_BANK3 or FSMC_NORSRAM_BANK4 */
 264   else
 265   {
 266     Device->BTCR[Bank] = 0x000030D2;
 267   }
 268
 269   Device->BTCR[Bank + 1] = 0x0FFFFFFF;
 270   ExDevice->BWTR[Bank]   = 0x0FFFFFFF;
 271
 272   return HAL_OK;
 273 }
 274
 275
 276 /**
 277   * @brief  Initialize the FSMC_NORSRAM Timing according to the specified
 278   *         parameters in the FSMC_NORSRAM_TimingTypeDef
 279   * @param  Device: Pointer to NORSRAM device instance
 280   * @param  Timing: Pointer to NORSRAM Timing structure
 281   * @param  Bank: NORSRAM bank number
 282   * @retval HAL status
 283   */
 284 HAL_StatusTypeDef FSMC_NORSRAM_Timing_Init(FSMC_NORSRAM_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank)
 285 {
 286   /* Check the parameters */
 287   assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
 288   assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
 289   assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
 290   assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
 291   assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
 292   assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
 293   assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
 294   assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
 295   assert_param(IS_FSMC_NORSRAM_BANK(Bank));
 296
 297   /* Set FSMC_NORSRAM device timing parameters */
 298   MODIFY_REG(Device->BTCR[Bank + 1],                                              \
 299     (FSMC_BTRx_ADDSET | FSMC_BTRx_ADDHLD | FSMC_BTRx_DATAST | FSMC_BTRx_BUSTURN | \
 300     FSMC_BTRx_CLKDIV | FSMC_BTRx_DATLAT | FSMC_BTRx_ACCMOD),                      \
 301     ( Timing->AddressSetupTime                                                  | \
 302     ((Timing->AddressHoldTime)        << POSITION_VAL(FSMC_BTRx_ADDHLD))        | \
 303     ((Timing->DataSetupTime)          << POSITION_VAL(FSMC_BTRx_DATAST))        | \
 304     ((Timing->BusTurnAroundDuration)  << POSITION_VAL(FSMC_BTRx_BUSTURN))       | \
 305     (((Timing->CLKDivision)-1)        << POSITION_VAL(FSMC_BTRx_CLKDIV))        | \
 306     (((Timing->DataLatency)-2)        << POSITION_VAL(FSMC_BTRx_DATLAT))        | \
 307     (Timing->AccessMode)));
 308
 309   return HAL_OK;
 310 }
 311
 312 /**
 313   * @brief  Initialize the FSMC_NORSRAM Extended mode Timing according to the specified
 314   *         parameters in the FSMC_NORSRAM_TimingTypeDef
 315   * @param  Device: Pointer to NORSRAM device instance
 316   * @param  Timing: Pointer to NORSRAM Timing structure
 317   * @param  Bank: NORSRAM bank number
 318   * @param  ExtendedMode: FSMC Extended Mode
 319   *          This parameter can be one of the following values:
 320   *            @arg FSMC_EXTENDED_MODE_DISABLE
 321   *            @arg FSMC_EXTENDED_MODE_ENABLE
 322   * @retval HAL status
 323   */
 324 HAL_StatusTypeDef  FSMC_NORSRAM_Extended_Timing_Init(FSMC_NORSRAM_EXTENDED_TypeDef *Device, FSMC_NORSRAM_TimingTypeDef *Timing, uint32_t Bank, uint32_t ExtendedMode)
 325 {
 326   /* Check the parameters */
 327   assert_param(IS_FSMC_EXTENDED_MODE(ExtendedMode));
 328
 329   /* Set NORSRAM device timing register for write configuration, if extended mode is used */
 330   if(ExtendedMode == FSMC_EXTENDED_MODE_ENABLE)
 331   {
 332     /* Check the parameters */
 333     assert_param(IS_FSMC_NORSRAM_EXTENDED_DEVICE(Device));
 334     assert_param(IS_FSMC_ADDRESS_SETUP_TIME(Timing->AddressSetupTime));
 335     assert_param(IS_FSMC_ADDRESS_HOLD_TIME(Timing->AddressHoldTime));
 336     assert_param(IS_FSMC_DATASETUP_TIME(Timing->DataSetupTime));
 337 #if defined (STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
 338     assert_param(IS_FSMC_TURNAROUND_TIME(Timing->BusTurnAroundDuration));
 339 #else
 340     assert_param(IS_FSMC_CLK_DIV(Timing->CLKDivision));
 341     assert_param(IS_FSMC_DATA_LATENCY(Timing->DataLatency));
 342 #endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG */
 343     assert_param(IS_FSMC_ACCESS_MODE(Timing->AccessMode));
 344     assert_param(IS_FSMC_NORSRAM_BANK(Bank));
 345
 346 #if defined (STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
 347     MODIFY_REG(Device->BWTR[Bank],                                                \
 348       (FSMC_BWTRx_ADDSET | FSMC_BWTRx_ADDHLD | FSMC_BWTRx_DATAST | FSMC_BWTRx_ACCMOD | FSMC_BWTRx_BUSTURN), \
 349       (Timing->AddressSetupTime                                                 | \
 350       ((Timing->AddressHoldTime)        << POSITION_VAL(FSMC_BWTRx_ADDHLD))     | \
 351       ((Timing->DataSetupTime)          << POSITION_VAL(FSMC_BWTRx_DATAST))     | \
 352       Timing->AccessMode                                                        | \
 353       ((Timing->BusTurnAroundDuration)  << POSITION_VAL(FSMC_BWTRx_BUSTURN))));
 354 #else
 355     MODIFY_REG(Device->BWTR[Bank],                                                \
 356       (FSMC_BWTRx_ADDSET | FSMC_BWTRx_ADDHLD | FSMC_BWTRx_DATAST | FSMC_BWTRx_ACCMOD | FSMC_BWTRx_CLKDIV | FSMC_BWTRx_DATLAT), \
 357       (Timing->AddressSetupTime                 | \
 358       ((Timing->AddressHoldTime)  << POSITION_VAL(FSMC_BWTRx_ADDHLD))           | \
 359       ((Timing->DataSetupTime)    << POSITION_VAL(FSMC_BWTRx_DATAST))           | \
 360       Timing->AccessMode                                                        | \
 361       (((Timing->CLKDivision)-1)  << POSITION_VAL(FSMC_BTRx_CLKDIV))            | \
 362       (((Timing->DataLatency)-2)  << POSITION_VAL(FSMC_BWTRx_DATLAT))));
 363 #endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG */
 364   }
 365   else
 366   {
 367     Device->BWTR[Bank] = 0x0FFFFFFF;
 368   }
 369
 370   return HAL_OK;
 371 }
 372
 373
 374 /**
 375   * @}
 376   */
 377
 378
 379 /** @defgroup FSMC_NORSRAM_Group2 Control functions
 380  *  @brief   management functions
 381  *
 382 @verbatim
 383   ==============================================================================
 384                       ##### FSMC_NORSRAM Control functions #####
 385   ==============================================================================
 386   [..]
 387     This subsection provides a set of functions allowing to control dynamically
 388     the FSMC NORSRAM interface.
 389
 390 @endverbatim
 391   * @{
 392   */
 393
 394 /**
 395   * @brief  Enables dynamically FSMC_NORSRAM write operation.
 396   * @param  Device: Pointer to NORSRAM device instance
 397   * @param  Bank: NORSRAM bank number
 398   * @retval HAL status
 399   */
 400 HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Enable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
 401 {
 402   /* Check the parameters */
 403   assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
 404   assert_param(IS_FSMC_NORSRAM_BANK(Bank));
 405
 406   /* Enable write operation */
 407   SET_BIT(Device->BTCR[Bank], FSMC_WRITE_OPERATION_ENABLE);
 408
 409   return HAL_OK;
 410 }
 411
 412 /**
 413   * @brief  Disables dynamically FSMC_NORSRAM write operation.
 414   * @param  Device: Pointer to NORSRAM device instance
 415   * @param  Bank: NORSRAM bank number
 416   * @retval HAL status
 417   */
 418 HAL_StatusTypeDef FSMC_NORSRAM_WriteOperation_Disable(FSMC_NORSRAM_TypeDef *Device, uint32_t Bank)
 419 {
 420   /* Check the parameters */
 421   assert_param(IS_FSMC_NORSRAM_DEVICE(Device));
 422   assert_param(IS_FSMC_NORSRAM_BANK(Bank));
 423
 424   /* Disable write operation */
 425   CLEAR_BIT(Device->BTCR[Bank], FSMC_WRITE_OPERATION_ENABLE);
 426
 427   return HAL_OK;
 428 }
 429
 430 /**
 431   * @}
 432   */
 433
 434 /**
 435   * @}
 436   */
 437 #if defined (STM32F101xE) || defined(STM32F103xE) || defined(STM32F101xG) || defined(STM32F103xG)
 438 /** @defgroup FSMC_NAND FSMC NAND Controller functions
 439   * @brief    NAND Controller functions
 440   *
 441   @verbatim
 442   ==============================================================================
 443                     ##### How to use NAND device driver #####
 444   ==============================================================================
 445   [..]
 446     This driver contains a set of APIs to interface with the FSMC NAND banks in order
 447     to run the NAND external devices.
 448
 449     (+) FSMC NAND bank reset using the function FSMC_NAND_DeInit()
 450     (+) FSMC NAND bank control configuration using the function FSMC_NAND_Init()
 451     (+) FSMC NAND bank common space timing configuration using the function
 452         FSMC_NAND_CommonSpace_Timing_Init()
 453     (+) FSMC NAND bank attribute space timing configuration using the function
 454         FSMC_NAND_AttributeSpace_Timing_Init()
 455     (+) FSMC NAND bank enable/disable ECC correction feature using the functions
 456         FSMC_NAND_ECC_Enable()/FSMC_NAND_ECC_Disable()
 457     (+) FSMC NAND bank get ECC correction code using the function FSMC_NAND_GetECC()
 458
 459 @endverbatim
 460   * @{
 461   */
 462
 463 /** @defgroup FSMC_NAND_Exported_Functions_Group1 Initialization and de-initialization functions
 464  *  @brief    Initialization and Configuration functions
 465  *
 466 @verbatim
 467   ==============================================================================
 468               ##### Initialization and de_initialization functions #####
 469   ==============================================================================
 470   [..]
 471     This section provides functions allowing to:
 472     (+) Initialize and configure the FSMC NAND interface
 473     (+) De-initialize the FSMC NAND interface
 474     (+) Configure the FSMC clock and associated GPIOs
 475
 476 @endverbatim
 477   * @{
 478   */
 479
 480 /**
 481   * @brief  Initializes the FSMC_NAND device according to the specified
 482   *         control parameters in the FSMC_NAND_HandleTypeDef
 483   * @param  Device: Pointer to NAND device instance
 484   * @param  Init: Pointer to NAND Initialization structure
 485   * @retval HAL status
 486   */
 487 HAL_StatusTypeDef FSMC_NAND_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_InitTypeDef *Init)
 488 {
 489   /* Check the parameters */
 490   assert_param(IS_FSMC_NAND_DEVICE(Device));
 491   assert_param(IS_FSMC_NAND_BANK(Init->NandBank));
 492   assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
 493   assert_param(IS_FSMC_NAND_MEMORY_WIDTH(Init->MemoryDataWidth));
 494   assert_param(IS_FSMC_ECC_STATE(Init->EccComputation));
 495   assert_param(IS_FSMC_ECCPAGE_SIZE(Init->ECCPageSize));
 496   assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
 497   assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
 498
 499   if(Init->NandBank == FSMC_NAND_BANK2)
 500   {
 501     /* NAND bank 2 registers configuration */
 502     MODIFY_REG(Device->PCR2, PCR_CLEAR_MASK, (Init->Waitfeature                  |\
 503                    FSMC_PCR_MEMORY_TYPE_NAND                                     |\
 504                    Init->MemoryDataWidth                                         |\
 505                    Init->EccComputation                                          |\
 506                    Init->ECCPageSize                                             |\
 507                    ((Init->TCLRSetupTime) << POSITION_VAL(FSMC_PCRx_TCLR))       |\
 508                    ((Init->TARSetupTime) << POSITION_VAL(FSMC_PCRx_TAR))));
 509   }
 510   else
 511   {
 512     /* NAND bank 3 registers configuration */
 513     MODIFY_REG(Device->PCR3, PCR_CLEAR_MASK, (Init->Waitfeature                  |\
 514                    FSMC_PCR_MEMORY_TYPE_NAND                                     |\
 515                    Init->MemoryDataWidth                                         |\
 516                    Init->EccComputation                                          |\
 517                    Init->ECCPageSize                                             |\
 518                    ((Init->TCLRSetupTime) << POSITION_VAL(FSMC_PCRx_TCLR))       |\
 519                    ((Init->TARSetupTime) << POSITION_VAL(FSMC_PCRx_TAR))));
 520   }
 521
 522   return HAL_OK;
 523
 524 }
 525
 526 /**
 527   * @brief  Initializes the FSMC_NAND Common space Timing according to the specified
 528   *         parameters in the FSMC_NAND_PCC_TimingTypeDef
 529   * @param  Device: Pointer to NAND device instance
 530   * @param  Timing: Pointer to NAND timing structure
 531   * @param  Bank: NAND bank number
 532   * @retval HAL status
 533   */
 534 HAL_StatusTypeDef FSMC_NAND_CommonSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
 535 {
 536   /* Check the parameters */
 537   assert_param(IS_FSMC_NAND_DEVICE(Device));
 538   assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
 539   assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
 540   assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
 541   assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
 542   assert_param(IS_FSMC_NAND_BANK(Bank));
 543
 544   if(Bank == FSMC_NAND_BANK2)
 545   {
 546     /* NAND bank 2 registers configuration */
 547     MODIFY_REG(Device->PMEM2, PMEM_CLEAR_MASK, (Timing->SetupTime                      |\
 548                    ((Timing->WaitSetupTime) << POSITION_VAL(FSMC_PMEMx_MEMWAITx))      |\
 549                    ((Timing->HoldSetupTime) << POSITION_VAL(FSMC_PMEMx_MEMHOLDx))      |\
 550                    ((Timing->HiZSetupTime) << POSITION_VAL(FSMC_PMEMx_MEMHIZx))));
 551
 552   }
 553   else
 554   {
 555     /* NAND bank 3 registers configuration */
 556     MODIFY_REG(Device->PMEM3, PMEM_CLEAR_MASK, (Timing->SetupTime                      |\
 557                    ((Timing->WaitSetupTime) << POSITION_VAL(FSMC_PMEMx_MEMWAITx))      |\
 558                    ((Timing->HoldSetupTime) << POSITION_VAL(FSMC_PMEMx_MEMHOLDx))      |\
 559                    ((Timing->HiZSetupTime) << POSITION_VAL(FSMC_PMEMx_MEMHIZx))));
 560   }
 561
 562   return HAL_OK;
 563 }
 564
 565 /**
 566   * @brief  Initializes the FSMC_NAND Attribute space Timing according to the specified
 567   *         parameters in the FSMC_NAND_PCC_TimingTypeDef
 568   * @param  Device: Pointer to NAND device instance
 569   * @param  Timing: Pointer to NAND timing structure
 570   * @param  Bank: NAND bank number
 571   * @retval HAL status
 572   */
 573 HAL_StatusTypeDef FSMC_NAND_AttributeSpace_Timing_Init(FSMC_NAND_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing, uint32_t Bank)
 574 {
 575   /* Check the parameters */
 576   assert_param(IS_FSMC_NAND_DEVICE(Device));
 577   assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
 578   assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
 579   assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
 580   assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
 581   assert_param(IS_FSMC_NAND_BANK(Bank));
 582
 583   if(Bank == FSMC_NAND_BANK2)
 584   {
 585     /* NAND bank 2 registers configuration */
 586     MODIFY_REG(Device->PATT2, PATT_CLEAR_MASK, (Timing->SetupTime                       |\
 587                    ((Timing->WaitSetupTime) << POSITION_VAL(FSMC_PATTx_ATTWAITx))       |\
 588                    ((Timing->HoldSetupTime) << POSITION_VAL(FSMC_PATTx_ATTHOLDx))       |\
 589                    ((Timing->HiZSetupTime) << POSITION_VAL(FSMC_PATTx_ATTHIZx))));
 590   }
 591   else
 592   {
 593     /* NAND bank 3 registers configuration */
 594     MODIFY_REG(Device->PATT3, PATT_CLEAR_MASK, (Timing->SetupTime                       |\
 595                    ((Timing->WaitSetupTime) << POSITION_VAL(FSMC_PATTx_ATTWAITx))       |\
 596                    ((Timing->HoldSetupTime) << POSITION_VAL(FSMC_PATTx_ATTHOLDx))       |\
 597                    ((Timing->HiZSetupTime) << POSITION_VAL(FSMC_PATTx_ATTHIZx))));
 598   }
 599
 600   return HAL_OK;
 601 }
 602
 603
 604 /**
 605   * @brief  DeInitializes the FSMC_NAND device
 606   * @param  Device: Pointer to NAND device instance
 607   * @param  Bank: NAND bank number
 608   * @retval HAL status
 609   */
 610 HAL_StatusTypeDef FSMC_NAND_DeInit(FSMC_NAND_TypeDef *Device, uint32_t Bank)
 611 {
 612   /* Check the parameters */
 613   assert_param(IS_FSMC_NAND_DEVICE(Device));
 614   assert_param(IS_FSMC_NAND_BANK(Bank));
 615
 616   /* Disable the NAND Bank */
 617   __FSMC_NAND_DISABLE(Device, Bank);
 618
 619   /* De-initialize the NAND Bank */
 620   if(Bank == FSMC_NAND_BANK2)
 621   {
 622     /* Set the FSMC_NAND_BANK2 registers to their reset values */
 623     WRITE_REG(Device->PCR2,  0x00000018);
 624     WRITE_REG(Device->SR2,   0x00000040);
 625     WRITE_REG(Device->PMEM2, 0xFCFCFCFC);
 626     WRITE_REG(Device->PATT2, 0xFCFCFCFC);
 627   }
 628   /* FSMC_Bank3_NAND */
 629   else
 630   {
 631     /* Set the FSMC_NAND_BANK3 registers to their reset values */
 632     WRITE_REG(Device->PCR3,  0x00000018);
 633     WRITE_REG(Device->SR3,   0x00000040);
 634     WRITE_REG(Device->PMEM3, 0xFCFCFCFC);
 635     WRITE_REG(Device->PATT3, 0xFCFCFCFC);
 636   }
 637
 638   return HAL_OK;
 639 }
 640
 641 /**
 642   * @}
 643   */
 644
 645
 646 /** @defgroup FSMC_NAND_Exported_Functions_Group2 Peripheral Control functions
 647  *  @brief   management functions
 648  *
 649 @verbatim
 650   ==============================================================================
 651                        ##### FSMC_NAND Control functions #####
 652   ==============================================================================
 653   [..]
 654     This subsection provides a set of functions allowing to control dynamically
 655     the FSMC NAND interface.
 656
 657 @endverbatim
 658   * @{
 659   */
 660
 661
 662 /**
 663   * @brief  Enables dynamically FSMC_NAND ECC feature.
 664   * @param  Device: Pointer to NAND device instance
 665   * @param  Bank: NAND bank number
 666   * @retval HAL status
 667   */
 668 HAL_StatusTypeDef FSMC_NAND_ECC_Enable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
 669 {
 670   /* Check the parameters */
 671   assert_param(IS_FSMC_NAND_DEVICE(Device));
 672   assert_param(IS_FSMC_NAND_BANK(Bank));
 673
 674   /* Enable ECC feature */
 675   if(Bank == FSMC_NAND_BANK2)
 676   {
 677     SET_BIT(Device->PCR2, FSMC_PCRx_ECCEN);
 678   }
 679   else
 680   {
 681     SET_BIT(Device->PCR3, FSMC_PCRx_ECCEN);
 682   }
 683
 684   return HAL_OK;
 685 }
 686
 687
 688 /**
 689   * @brief  Disables dynamically FSMC_NAND ECC feature.
 690   * @param  Device: Pointer to NAND device instance
 691   * @param  Bank: NAND bank number
 692   * @retval HAL status
 693   */
 694 HAL_StatusTypeDef FSMC_NAND_ECC_Disable(FSMC_NAND_TypeDef *Device, uint32_t Bank)
 695 {
 696   /* Check the parameters */
 697   assert_param(IS_FSMC_NAND_DEVICE(Device));
 698   assert_param(IS_FSMC_NAND_BANK(Bank));
 699
 700   /* Disable ECC feature */
 701   if(Bank == FSMC_NAND_BANK2)
 702   {
 703     CLEAR_BIT(Device->PCR2, FSMC_PCRx_ECCEN);
 704   }
 705   else
 706   {
 707     CLEAR_BIT(Device->PCR3, FSMC_PCRx_ECCEN);
 708   }
 709
 710   return HAL_OK;
 711 }
 712
 713 /**
 714   * @brief  Disables dynamically FSMC_NAND ECC feature.
 715   * @param  Device: Pointer to NAND device instance
 716   * @param  ECCval: Pointer to ECC value
 717   * @param  Bank: NAND bank number
 718   * @param  Timeout: Timeout wait value
 719   * @retval HAL status
 720   */
 721 HAL_StatusTypeDef FSMC_NAND_GetECC(FSMC_NAND_TypeDef *Device, uint32_t *ECCval, uint32_t Bank, uint32_t Timeout)
 722 {
 723   uint32_t tickstart = 0;
 724
 725   /* Check the parameters */
 726   assert_param(IS_FSMC_NAND_DEVICE(Device));
 727   assert_param(IS_FSMC_NAND_BANK(Bank));
 728
 729   /* Get tick */
 730   tickstart = HAL_GetTick();
 731
 732   /* Wait untill FIFO is empty */
 733   while(__FSMC_NAND_GET_FLAG(Device, Bank, FSMC_FLAG_FEMPT) == RESET)
 734   {
 735     /* Check for the Timeout */
 736     if(Timeout != HAL_MAX_DELAY)
 737     {
 738       if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout))
 739       {
 740         return HAL_TIMEOUT;
 741       }
 742     }
 743   }
 744
 745   if(Bank == FSMC_NAND_BANK2)
 746   {
 747     /* Get the ECCR2 register value */
 748     *ECCval = (uint32_t)Device->ECCR2;
 749   }
 750   else
 751   {
 752     /* Get the ECCR3 register value */
 753     *ECCval = (uint32_t)Device->ECCR3;
 754   }
 755
 756   return HAL_OK;
 757 }
 758
 759 /**
 760   * @}
 761   */
 762
 763 /**
 764   * @}
 765   */
 766
 767 /** @defgroup FSMC_PCCARD FSMC PCCARD Controller functions
 768   * @brief    PCCARD Controller functions
 769   *
 770   @verbatim
 771   ==============================================================================
 772                     ##### How to use PCCARD device driver #####
 773   ==============================================================================
 774   [..]
 775     This driver contains a set of APIs to interface with the FSMC PCCARD bank in order
 776     to run the PCCARD/compact flash external devices.
 777
 778     (+) FSMC PCCARD bank reset using the function FSMC_PCCARD_DeInit()
 779     (+) FSMC PCCARD bank control configuration using the function FSMC_PCCARD_Init()
 780     (+) FSMC PCCARD bank common space timing configuration using the function
 781         FSMC_PCCARD_CommonSpace_Timing_Init()
 782     (+) FSMC PCCARD bank attribute space timing configuration using the function
 783         FSMC_PCCARD_AttributeSpace_Timing_Init()
 784     (+) FSMC PCCARD bank IO space timing configuration using the function
 785         FSMC_PCCARD_IOSpace_Timing_Init()
 786
 787
 788 @endverbatim
 789   * @{
 790   */
 791
 792 /** @defgroup FSMC_PCCARD_Exported_Functions_Group1 Initialization and de-initialization functions
 793  *  @brief    Initialization and Configuration functions
 794  *
 795 @verbatim
 796   ==============================================================================
 797               ##### Initialization and de_initialization functions #####
 798   ==============================================================================
 799   [..]
 800     This section provides functions allowing to:
 801     (+) Initialize and configure the FSMC PCCARD interface
 802     (+) De-initialize the FSMC PCCARD interface
 803     (+) Configure the FSMC clock and associated GPIOs
 804
 805 @endverbatim
 806   * @{
 807   */
 808
 809 /**
 810   * @brief  Initializes the FSMC_PCCARD device according to the specified
 811   *         control parameters in the FSMC_PCCARD_HandleTypeDef
 812   * @param  Device: Pointer to PCCARD device instance
 813   * @param  Init: Pointer to PCCARD Initialization structure
 814   * @retval HAL status
 815   */
 816 HAL_StatusTypeDef FSMC_PCCARD_Init(FSMC_PCCARD_TypeDef *Device, FSMC_PCCARD_InitTypeDef *Init)
 817 {
 818   /* Check the parameters */
 819   assert_param(IS_FSMC_PCCARD_DEVICE(Device));
 820   assert_param(IS_FSMC_WAIT_FEATURE(Init->Waitfeature));
 821   assert_param(IS_FSMC_TCLR_TIME(Init->TCLRSetupTime));
 822   assert_param(IS_FSMC_TAR_TIME(Init->TARSetupTime));
 823
 824   /* Set FSMC_PCCARD device control parameters */
 825   MODIFY_REG(Device->PCR4,                                  \
 826     (FSMC_PCRx_PTYP | FSMC_PCRx_PWAITEN |  FSMC_PCRx_PWID  | FSMC_PCRx_TCLR | FSMC_PCRx_TAR), \
 827     (FSMC_PCR_MEMORY_TYPE_PCCARD                          | \
 828     Init->Waitfeature                                     | \
 829     FSMC_NAND_PCC_MEM_BUS_WIDTH_16                        | \
 830     (Init->TCLRSetupTime << POSITION_VAL(FSMC_PCRx_TCLR)) | \
 831     (Init->TARSetupTime << POSITION_VAL(FSMC_PCRx_TAR))));
 832
 833   return HAL_OK;
 834
 835 }
 836
 837 /**
 838   * @brief  Initializes the FSMC_PCCARD Common space Timing according to the specified
 839   *         parameters in the FSMC_NAND_PCC_TimingTypeDef
 840   * @param  Device: Pointer to PCCARD device instance
 841   * @param  Timing: Pointer to PCCARD timing structure
 842   * @retval HAL status
 843   */
 844 HAL_StatusTypeDef FSMC_PCCARD_CommonSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
 845 {
 846   /* Check the parameters */
 847   assert_param(IS_FSMC_PCCARD_DEVICE(Device));
 848   assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
 849   assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
 850   assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
 851   assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
 852
 853   /* Set PCCARD timing parameters */
 854   MODIFY_REG(Device->PMEM4, PMEM_CLEAR_MASK,                            \
 855       (Timing->SetupTime                                              | \
 856       ((Timing->WaitSetupTime) << POSITION_VAL(FSMC_PMEMx_MEMWAITx))  | \
 857       ((Timing->HoldSetupTime) << POSITION_VAL(FSMC_PMEMx_MEMHOLDx))  | \
 858       ((Timing->HiZSetupTime) << POSITION_VAL(FSMC_PMEMx_MEMHIZx))));
 859
 860   return HAL_OK;
 861 }
 862
 863 /**
 864   * @brief  Initializes the FSMC_PCCARD Attribute space Timing according to the specified
 865   *         parameters in the FSMC_NAND_PCC_TimingTypeDef
 866   * @param  Device: Pointer to PCCARD device instance
 867   * @param  Timing: Pointer to PCCARD timing structure
 868   * @retval HAL status
 869   */
 870 HAL_StatusTypeDef FSMC_PCCARD_AttributeSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
 871 {
 872   /* Check the parameters */
 873   assert_param(IS_FSMC_PCCARD_DEVICE(Device));
 874   assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
 875   assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
 876   assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
 877   assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
 878
 879   /* Set PCCARD timing parameters */
 880   MODIFY_REG(Device->PATT4, PATT_CLEAR_MASK,                          \
 881     (Timing->SetupTime                                              | \
 882     ((Timing->WaitSetupTime) << POSITION_VAL(FSMC_PATTx_ATTWAITx))  | \
 883     ((Timing->HoldSetupTime) << POSITION_VAL(FSMC_PATTx_ATTHOLDx))   | \
 884     ((Timing->HiZSetupTime) << POSITION_VAL(FSMC_PATTx_ATTHIZx))));
 885
 886   return HAL_OK;
 887 }
 888
 889 /**
 890   * @brief  Initializes the FSMC_PCCARD IO space Timing according to the specified
 891   *         parameters in the FSMC_NAND_PCC_TimingTypeDef
 892   * @param  Device: Pointer to PCCARD device instance
 893   * @param  Timing: Pointer to PCCARD timing structure
 894   * @retval HAL status
 895   */
 896 HAL_StatusTypeDef FSMC_PCCARD_IOSpace_Timing_Init(FSMC_PCCARD_TypeDef *Device, FSMC_NAND_PCC_TimingTypeDef *Timing)
 897 {
 898   /* Check the parameters */
 899   assert_param(IS_FSMC_PCCARD_DEVICE(Device));
 900   assert_param(IS_FSMC_SETUP_TIME(Timing->SetupTime));
 901   assert_param(IS_FSMC_WAIT_TIME(Timing->WaitSetupTime));
 902   assert_param(IS_FSMC_HOLD_TIME(Timing->HoldSetupTime));
 903   assert_param(IS_FSMC_HIZ_TIME(Timing->HiZSetupTime));
 904
 905   /* Set FSMC_PCCARD device timing parameters */
 906   MODIFY_REG(Device->PIO4, PIO4_CLEAR_MASK,                         \
 907     (Timing->SetupTime                                            | \
 908     (Timing->WaitSetupTime   << POSITION_VAL(FSMC_PIO4_IOWAIT4)) | \
 909     (Timing->HoldSetupTime   << POSITION_VAL(FSMC_PIO4_IOHOLD4)) | \
 910     (Timing->HiZSetupTime    << POSITION_VAL(FSMC_PIO4_IOHIZ4))));
 911
 912   return HAL_OK;
 913 }
 914
 915 /**
 916   * @brief  DeInitializes the FSMC_PCCARD device
 917   * @param  Device: Pointer to PCCARD device instance
 918   * @retval HAL status
 919   */
 920 HAL_StatusTypeDef FSMC_PCCARD_DeInit(FSMC_PCCARD_TypeDef *Device)
 921 {
 922   /* Check the parameters */
 923   assert_param(IS_FSMC_PCCARD_DEVICE(Device));
 924
 925   /* Disable the FSMC_PCCARD device */
 926   __FSMC_PCCARD_DISABLE(Device);
 927
 928   /* De-initialize the FSMC_PCCARD device */
 929   WRITE_REG(Device->PCR4,  0x00000018);
 930   WRITE_REG(Device->SR4,   0x00000040);
 931   WRITE_REG(Device->PMEM4, 0xFCFCFCFC);
 932   WRITE_REG(Device->PATT4, 0xFCFCFCFC);
 933   WRITE_REG(Device->PIO4,  0xFCFCFCFC);
 934
 935   return HAL_OK;
 936 }
 937
 938 /**
 939   * @}
 940   */
 941
 942 /**
 943   * @}
 944   */
 945
 946 #endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG */
 947
 948 /**
 949   * @}
 950   */
 951
 952 /**
 953   * @}
 954   */
 955
 956 #endif /* STM32F101xE || STM32F103xE || STM32F101xG || STM32F103xG || STM32F100xE */
 957
 958 #endif /* HAL_SRAM_MODULE_ENABLED || HAL_NOR_MODULE_ENABLED || HAL_PCCARD_MODULE_ENABLED || HAL_NAND_MODULE_ENABLED */
 959
 960 /**
 961   * @}
 962   */
 963
 964 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/