2 ******************************************************************************
4 * @author MCD Application Team
7 * @brief CMSIS STM32F3xx Device Peripheral Access Layer Header File.
9 * The file is the unique include file that the application programmer
10 * is using in the C source code, usually in main.c. This file contains:
11 * - Configuration section that allows to select:
12 * - The STM32F3xx device used in the target application
13 * - To use or not the peripheral
\92s drivers in application code(i.e.
14 * code will be based on direct access to peripheral
\92s registers
15 * rather than drivers API), this option is controlled by
16 * "#define USE_HAL_DRIVER"
18 ******************************************************************************
21 * <h2><center>© COPYRIGHT(c) 2014 STMicroelectronics</center></h2>
23 * Redistribution and use in source and binary forms, with or without modification,
24 * are permitted provided that the following conditions are met:
25 * 1. Redistributions of source code must retain the above copyright notice,
26 * this list of conditions and the following disclaimer.
27 * 2. Redistributions in binary form must reproduce the above copyright notice,
28 * this list of conditions and the following disclaimer in the documentation
29 * and/or other materials provided with the distribution.
30 * 3. Neither the name of STMicroelectronics nor the names of its contributors
31 * may be used to endorse or promote products derived from this software
32 * without specific prior written permission.
34 * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
35 * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
36 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
37 * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
38 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
39 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
40 * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
41 * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
42 * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
43 * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
45 ******************************************************************************
52 /** @addtogroup stm32f3xx
61 #endif /* __cplusplus */
63 /** @addtogroup Library_configuration_section
67 /* Uncomment the line below according to the target STM32 device used in your
71 #if !defined (STM32F301x8) && !defined (STM32F302x8) && !defined (STM32F318xx) && \
72 !defined (STM32F302xC) && !defined (STM32F303xC) && !defined (STM32F358xx) && \
73 !defined (STM32F303x8) && !defined (STM32F334x8) && !defined (STM32F328xx) && \
74 !defined (STM32F302xE) && !defined (STM32F303xE) && !defined (STM32F398xx) && \
75 !defined (STM32F373xC) && !defined (STM32F378xx)
77 /* #define STM32F301x8 */ /*!< STM32F301K6, STM32F301K8, STM32F301C6, STM32F301C8,
78 STM32F301R6 and STM32F301R8 Devices */
79 /* #define STM32F302x8 */ /*!< STM32F302K6, STM32F302K8, STM32F302C6, STM32F302C8,
80 STM32F302R6 and STM32F302R8 Devices */
81 /* #define STM32F302xC */ /*!< STM32F302CB, STM32F302CC, STM32F302RB, STM32F302RC, STM32F302VB and STM32F302VC Devices */
82 /* #define STM32F302xE */ /*!< STM32F302CE, STM32F302RE, and STM32F302VE Devices */
83 /* #define STM32F303x8 */ /*!< STM32F303K6, STM32F303K8, STM32F303C6, STM32F303C8,
84 STM32F303R6 and STM32F303R8 Devices */
85 /* #define STM32F303xC */ /*!< STM32F303CB, STM32F303CC, STM32F303RB, STM32F303RC, STM32F303VB and STM32F303VC Devices */
86 #define STM32F303xE /*!< STM32F303RE, STM32F303VE and STM32F303ZE Devices */
87 /* #define STM32F373xC */ /*!< STM32F373C8, STM32F373CB, STM32F373CC, STM32F373R8, STM32F373RB, STM32F373RC,
88 STM32F373V8, STM32F373VB and STM32F373VC Devices */
89 /* #define STM32F334x8 */ /*!< STM32F334C4, STM32F334C6, STM32F334C8, STM32F334R4, STM32F334R6 and STM32F334R8 Devices */
90 /* #define STM32F318xx */ /*!< STM32F318K8, STM32F318C8: STM32F301x8 with regulator off: STM32F318xx Devices */
91 /* #define STM32F328xx */ /*!< STM32F328C8, STM32F328R8: STM32F334x8 with regulator off: STM32F328xx Devices */
92 /* #define STM32F358xx */ /*!< STM32F358CC, STM32F358RC, STM32F358VC: STM32F303xC with regulator off: STM32F358xx Devices */
93 /* #define STM32F378xx */ /*!< STM32F378CC, STM32F378RC, STM32F378VC: STM32F373xC with regulator off: STM32F378xx Devices */
94 /* #define STM32F398xx */ /*!< STM32F398CE, STM32F398RE, STM32F398VE: STM32F303xE with regulator off: STM32F398xx Devices */
97 /* Tip: To avoid modifying this file each time you need to switch between these
98 devices, you can define the device in your toolchain compiler preprocessor.
100 #if !defined (USE_HAL_DRIVER)
102 * @brief Comment the line below if you will not use the peripherals drivers.
103 In this case, these drivers will not be included and the application code will
104 be based on direct access to peripherals registers
106 #define USE_HAL_DRIVER
107 #endif /* USE_HAL_DRIVER */
110 * @brief CMSIS Device version number V2.1.0
112 #define __STM32F3xx_CMSIS_DEVICE_VERSION_MAIN (0x02) /*!< [31:24] main version */
113 #define __STM32F3xx_CMSIS_DEVICE_VERSION_SUB1 (0x01) /*!< [23:16] sub1 version */
114 #define __STM32F3xx_CMSIS_DEVICE_VERSION_SUB2 (0x00) /*!< [15:8] sub2 version */
115 #define __STM32F3xx_CMSIS_DEVICE_VERSION_RC (0x00) /*!< [7:0] release candidate */
116 #define __STM32F3xx_CMSIS_DEVICE_VERSION ((__CMSIS_DEVICE_VERSION_MAIN << 24)\
117 |(__CMSIS_DEVICE_HAL_VERSION_SUB1 << 16)\
118 |(__CMSIS_DEVICE_HAL_VERSION_SUB2 << 8 )\
119 |(__CMSIS_DEVICE_HAL_VERSION_RC))
125 /** @addtogroup Device_Included
129 #if defined(STM32F301x8)
130 #include "stm32f301x8.h"
131 #elif defined(STM32F302x8)
132 #include "stm32f302x8.h"
133 #elif defined(STM32F302xC)
134 #include "stm32f302xc.h"
135 #elif defined(STM32F302xE)
136 #include "stm32f302xe.h"
137 #elif defined(STM32F303x8)
138 #include "stm32f303x8.h"
139 #elif defined(STM32F303xC)
140 #include "stm32f303xc.h"
141 #elif defined(STM32F303xE)
142 #include "stm32f303xe.h"
143 #elif defined(STM32F373xC)
144 #include "stm32f373xc.h"
145 #elif defined(STM32F334x8)
146 #include "stm32f334x8.h"
147 #elif defined(STM32F318xx)
148 #include "stm32f318xx.h"
149 #elif defined(STM32F328xx)
150 #include "stm32f328xx.h"
151 #elif defined(STM32F358xx)
152 #include "stm32f358xx.h"
153 #elif defined(STM32F378xx)
154 #include "stm32f378xx.h"
155 #elif defined(STM32F398xx)
156 #include "stm32f398xx.h"
158 #error "Please select first the target STM32F3xx device used in your application (in stm32f3xx.h file)"
165 /** @addtogroup Exported_types
172 } FlagStatus, ITStatus;
179 #define IS_FUNCTIONAL_STATE(STATE) (((STATE) == DISABLE) || ((STATE) == ENABLE))
192 /** @addtogroup Exported_macros
195 #define SET_BIT(REG, BIT) ((REG) |= (BIT))
197 #define CLEAR_BIT(REG, BIT) ((REG) &= ~(BIT))
199 #define READ_BIT(REG, BIT) ((REG) & (BIT))
201 #define CLEAR_REG(REG) ((REG) = (0x0))
203 #define WRITE_REG(REG, VAL) ((REG) = (VAL))
205 #define READ_REG(REG) ((REG))
207 #define MODIFY_REG(REG, CLEARMASK, SETMASK) WRITE_REG((REG), (((READ_REG(REG)) & (~(CLEARMASK))) | (SETMASK)))
209 #define POSITION_VAL(VAL) (__CLZ(__RBIT(VAL)))
212 #if defined (USE_HAL_DRIVER)
213 #include "stm32f3xx_hal.h"
214 #endif /* USE_HAL_DRIVER */
224 #endif /* __cplusplus */
226 #endif /* __STM32F3xx_H */
238 /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/