1 XT to USB keyboard converter
2 ==============================
3 This firmware converts XT keyboard protocol to USB.(It supports Scan Code Set 1.)
8 In case of Teensy2.0(ATMega32U4):
10 1. Connect **Vcc** and **GND**.
11 2. Connect **Clock** and **Data** line.
12 - **Interrupt**: **Clock** is on `PD1` and **Data** on `PD0`.(Recommended. Soarer's converter compatible)
13 3. Optionally you need pull-up resistor. 1K-10K Ohm is OK.
15 To change pin configuration edit **config.h** and **Makefile**.
20 For **PJRC Teensy** just run `make`:
28 $ make KEYMAP=[plain|jis|spacefn|...]
30 After that you will find HEX file `xt_usb_lufa.hex` in current directory.
35 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in README.md of top directory) and existent keymap files.