/** ****************************************************************************** * @file stm32l1xx_hal_rtc_ex.c * @author MCD Application Team * @version V1.0.0 * @date 5-September-2014 * @brief Extended RTC HAL module driver. * This file provides firmware functions to manage the following * functionalities of the Real Time Clock (RTC) Extension peripheral: * + RTC Time Stamp functions * + RTC Tamper functions * + RTC Wake-up functions * + Extension Control functions * + Extension RTC features functions * @verbatim ============================================================================== ##### How to use this driver ##### ============================================================================== [..] (+) Enable the RTC domain access. (+) Configure the RTC Prescaler (Asynchronous and Synchronous) and RTC hour format using the HAL_RTC_Init() function. *** RTC Wakeup configuration *** ================================ [..] (+) To configure the RTC Wakeup Clock source and Counter use the HAL_RTCEx_SetWakeUpTimer() function. You can also configure the RTC Wakeup timer with interrupt mode using the HAL_RTCEx_SetWakeUpTimer_IT() function. (+) To read the RTC WakeUp Counter register, use the HAL_RTCEx_GetWakeUpTimer() function. *** TimeStamp configuration *** =============================== [..] (+) Configure the RTC_AFx trigger and enable the RTC TimeStamp using the HAL_RTCEx_SetTimeStamp() function. You can also configure the RTC TimeStamp with interrupt mode using the HAL_RTCEx_SetTimeStamp_IT() function. (+) To read the RTC TimeStamp Time and Date register, use the HAL_RTCEx_GetTimeStamp() function. (+) The TIMESTAMP alternate function can be mapped to RTC_AF1 (PC13). *** Tamper configuration *** ============================ [..] (+) Enable the RTC Tamper and configure the Tamper filter count, trigger Edge or Level according to the Tamper filter (if equal to 0 Edge else Level) value, sampling frequency, precharge or discharge and Pull-UP using the HAL_RTCEx_SetTamper() function. You can configure RTC Tamper with interrupt mode using HAL_RTCEx_SetTamper_IT() function. (+) The TAMPER1 alternate function can be mapped to RTC_AF1 (PC13). *** Backup Data Registers configuration *** =========================================== [..] (+) To write to the RTC Backup Data registers, use the HAL_RTCEx_BKUPWrite() function. (+) To read the RTC Backup Data registers, use the HAL_RTCEx_BKUPRead() function. @endverbatim ****************************************************************************** * @attention * *

© COPYRIGHT(c) 2014 STMicroelectronics

* * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * 1. Redistributions of source code must retain the above copyright notice, * this list of conditions and the following disclaimer. * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation * and/or other materials provided with the distribution. * 3. Neither the name of STMicroelectronics nor the names of its contributors * may be used to endorse or promote products derived from this software * without specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, * OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. * ****************************************************************************** */ /* Includes ------------------------------------------------------------------*/ #include "stm32l1xx_hal.h" /** @addtogroup STM32L1xx_HAL_Driver * @{ */ /** @addtogroup RTC * @{ */ #ifdef HAL_RTC_MODULE_ENABLED /* Private typedef -----------------------------------------------------------*/ /* Private define ------------------------------------------------------------*/ /* Private macro -------------------------------------------------------------*/ /* Private variables ---------------------------------------------------------*/ /* Private function prototypes -----------------------------------------------*/ /* Private functions ---------------------------------------------------------*/ /** @addtogroup RTC_Exported_Functions * @{ */ /** @addtogroup RTC_Exported_Functions_Group1 * @{ */ /** * @brief DeInitializes the RTC peripheral * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @note This function does not reset the RTC Backup Data registers. * @retval HAL status */ HAL_StatusTypeDef HAL_RTC_DeInit(RTC_HandleTypeDef *hrtc) { uint32_t tickstart = 0; /* Check the parameters */ assert_param(IS_RTC_ALL_INSTANCE(hrtc->Instance)); /* Set RTC state */ hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Set Initialization mode */ if(RTC_EnterInitMode(hrtc) != HAL_OK) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Set RTC state */ hrtc->State = HAL_RTC_STATE_ERROR; return HAL_ERROR; } else { /* Reset TR, DR and CR registers */ hrtc->Instance->TR = (uint32_t)0x00000000; hrtc->Instance->DR = (uint32_t)0x00002101; /* Reset All CR bits except CR[2:0] */ hrtc->Instance->CR &= (uint32_t)0x00000007; tickstart = HAL_GetTick(); /* Wait till WUTWF flag is set and if Time out is reached exit */ while(((hrtc->Instance->ISR) & RTC_ISR_WUTWF) == (uint32_t)RESET) { if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Set RTC state */ hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } /* Reset all RTC CR register bits */ hrtc->Instance->CR &= (uint32_t)0x00000000; hrtc->Instance->WUTR = (uint32_t)0x0000FFFF; hrtc->Instance->PRER = (uint32_t)0x007F00FF; hrtc->Instance->CALIBR = (uint32_t)0x00000000; hrtc->Instance->ALRMAR = (uint32_t)0x00000000; hrtc->Instance->ALRMBR = (uint32_t)0x00000000; #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) hrtc->Instance->SHIFTR = (uint32_t)0x00000000; hrtc->Instance->CALR = (uint32_t)0x00000000; hrtc->Instance->ALRMASSR = (uint32_t)0x00000000; hrtc->Instance->ALRMBSSR = (uint32_t)0x00000000; #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Reset ISR register and exit initialization mode */ hrtc->Instance->ISR = (uint32_t)0x00000000; /* Reset Tamper and alternate functions configuration register */ hrtc->Instance->TAFCR = 0x00000000; /* Wait for synchro */ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_ERROR; return HAL_ERROR; } } /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* De-Initialize RTC MSP */ HAL_RTC_MspDeInit(hrtc); hrtc->State = HAL_RTC_STATE_RESET; /* Release Lock */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @} */ /** @addtogroup RTC_Exported_Functions_Group2 * @{ */ /** * @brief Gets RTC current time. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param sTime: Pointer to Time structure * @param Format: Specifies the format of the entered parameters. * This parameter can be one of the following values: * @arg FORMAT_BIN: Binary data format * @arg FORMAT_BCD: BCD data format * @note Call HAL_RTC_GetDate() after HAL_RTC_GetTime() to unlock the values * in the higher-order calendar shadow registers. * @retval HAL status */ HAL_StatusTypeDef HAL_RTC_GetTime(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef *sTime, uint32_t Format) { uint32_t tmpreg = 0; /* Check the parameters */ assert_param(IS_RTC_FORMAT(Format)); #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* Get subseconds values from the correspondent registers*/ sTime->SubSeconds = (uint32_t)((hrtc->Instance->SSR) & RTC_SSR_SS); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Get the TR register */ tmpreg = (uint32_t)(hrtc->Instance->TR & RTC_TR_RESERVED_MASK); /* Fill the structure fields with the read parameters */ sTime->Hours = (uint8_t)((tmpreg & (RTC_TR_HT | RTC_TR_HU)) >> 16); sTime->Minutes = (uint8_t)((tmpreg & (RTC_TR_MNT | RTC_TR_MNU)) >>8); sTime->Seconds = (uint8_t)(tmpreg & (RTC_TR_ST | RTC_TR_SU)); sTime->TimeFormat = (uint8_t)((tmpreg & (RTC_TR_PM)) >> 16); /* Check the input parameters format */ if(Format == FORMAT_BIN) { /* Convert the time structure parameters to Binary format */ sTime->Hours = (uint8_t)RTC_Bcd2ToByte(sTime->Hours); sTime->Minutes = (uint8_t)RTC_Bcd2ToByte(sTime->Minutes); sTime->Seconds = (uint8_t)RTC_Bcd2ToByte(sTime->Seconds); } return HAL_OK; } /** * @} */ /** @addtogroup RTC_Exported_Functions_Group3 * @{ */ /** * @brief Sets the specified RTC Alarm. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param sAlarm: Pointer to Alarm structure * @param Format: Specifies the format of the entered parameters. * This parameter can be one of the following values: * @arg FORMAT_BIN: Binary data format * @arg FORMAT_BCD: BCD data format * @retval HAL status */ HAL_StatusTypeDef HAL_RTC_SetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) { uint32_t tickstart = 0; uint32_t tmpreg = 0; #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) uint32_t subsecondtmpreg = 0; #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Check the parameters */ assert_param(IS_RTC_FORMAT(Format)); assert_param(IS_ALARM(sAlarm->Alarm)); assert_param(IS_ALARM_MASK(sAlarm->AlarmMask)); assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; if(Format == FORMAT_BIN) { if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET) { assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); } else { sAlarm->AlarmTime.TimeFormat = 0x00; assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); } assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) { assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); } else { assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); } tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16) | \ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8) | \ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24) | \ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ ((uint32_t)sAlarm->AlarmMask)); } else { if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET) { tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours); assert_param(IS_RTC_HOUR12(tmpreg)); assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); } else { sAlarm->AlarmTime.TimeFormat = 0x00; assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); } assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) { tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg)); } else { tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg)); } tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16) | \ ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8) | \ ((uint32_t) sAlarm->AlarmTime.Seconds) | \ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \ ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24) | \ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ ((uint32_t)sAlarm->AlarmMask)); } #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* Configure the Alarm A or Alarm B Sub Second registers */ subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask)); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Configure the Alarm register */ if(sAlarm->Alarm == RTC_ALARM_A) { /* Disable the Alarm A interrupt */ __HAL_RTC_ALARMA_DISABLE(hrtc); /* In case of interrupt mode is used, the interrupt source must disabled */ __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRA); tickstart = HAL_GetTick(); /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET) { if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } hrtc->Instance->ALRMAR = (uint32_t)tmpreg; #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* Configure the Alarm A Sub Second register */ hrtc->Instance->ALRMASSR = subsecondtmpreg; #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Configure the Alarm state: Enable Alarm */ __HAL_RTC_ALARMA_ENABLE(hrtc); } else { /* Disable the Alarm B interrupt */ __HAL_RTC_ALARMB_DISABLE(hrtc); /* In case of interrupt mode is used, the interrupt source must disabled */ __HAL_RTC_ALARM_DISABLE_IT(hrtc, RTC_IT_ALRB); tickstart = HAL_GetTick(); /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET) { if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } hrtc->Instance->ALRMBR = (uint32_t)tmpreg; #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* Configure the Alarm B Sub Second register */ hrtc->Instance->ALRMBSSR = subsecondtmpreg; #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Configure the Alarm state: Enable Alarm */ __HAL_RTC_ALARMB_ENABLE(hrtc); } /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Sets the specified RTC Alarm with Interrupt * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param sAlarm: Pointer to Alarm structure * @param Format: Specifies the format of the entered parameters. * This parameter can be one of the following values: * @arg FORMAT_BIN: Binary data format * @arg FORMAT_BCD: BCD data format * @note The Alarm register can only be written when the corresponding Alarm * is disabled (Use the HAL_RTC_DeactivateAlarm()). * @note The HAL_RTC_SetTime() must be called before enabling the Alarm feature. * @retval HAL status */ HAL_StatusTypeDef HAL_RTC_SetAlarm_IT(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Format) { uint32_t tickstart = 0; uint32_t tmpreg = 0; #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) uint32_t subsecondtmpreg = 0; #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Check the parameters */ assert_param(IS_RTC_FORMAT(Format)); assert_param(IS_ALARM(sAlarm->Alarm)); assert_param(IS_ALARM_MASK(sAlarm->AlarmMask)); assert_param(IS_RTC_ALARM_DATE_WEEKDAY_SEL(sAlarm->AlarmDateWeekDaySel)); #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) assert_param(IS_RTC_ALARM_SUB_SECOND_VALUE(sAlarm->AlarmTime.SubSeconds)); assert_param(IS_RTC_ALARM_SUB_SECOND_MASK(sAlarm->AlarmSubSecondMask)); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; if(Format == FORMAT_BIN) { if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET) { assert_param(IS_RTC_HOUR12(sAlarm->AlarmTime.Hours)); assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); } else { sAlarm->AlarmTime.TimeFormat = 0x00; assert_param(IS_RTC_HOUR24(sAlarm->AlarmTime.Hours)); } assert_param(IS_RTC_MINUTES(sAlarm->AlarmTime.Minutes)); assert_param(IS_RTC_SECONDS(sAlarm->AlarmTime.Seconds)); if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) { assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(sAlarm->AlarmDateWeekDay)); } else { assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(sAlarm->AlarmDateWeekDay)); } tmpreg = (((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Hours) << 16) | \ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Minutes) << 8) | \ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmTime.Seconds)) | \ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \ ((uint32_t)RTC_ByteToBcd2(sAlarm->AlarmDateWeekDay) << 24) | \ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ ((uint32_t)sAlarm->AlarmMask)); } else { if((hrtc->Instance->CR & RTC_CR_FMT) != (uint32_t)RESET) { tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours); assert_param(IS_RTC_HOUR12(tmpreg)); assert_param(IS_RTC_HOURFORMAT12(sAlarm->AlarmTime.TimeFormat)); } else { sAlarm->AlarmTime.TimeFormat = 0x00; assert_param(IS_RTC_HOUR24(RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours))); } assert_param(IS_RTC_MINUTES(RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes))); assert_param(IS_RTC_SECONDS(RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds))); if(sAlarm->AlarmDateWeekDaySel == RTC_ALARMDATEWEEKDAYSEL_DATE) { tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); assert_param(IS_RTC_ALARM_DATE_WEEKDAY_DATE(tmpreg)); } else { tmpreg = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); assert_param(IS_RTC_ALARM_DATE_WEEKDAY_WEEKDAY(tmpreg)); } tmpreg = (((uint32_t)(sAlarm->AlarmTime.Hours) << 16) | \ ((uint32_t)(sAlarm->AlarmTime.Minutes) << 8) | \ ((uint32_t) sAlarm->AlarmTime.Seconds) | \ ((uint32_t)(sAlarm->AlarmTime.TimeFormat) << 16) | \ ((uint32_t)(sAlarm->AlarmDateWeekDay) << 24) | \ ((uint32_t)sAlarm->AlarmDateWeekDaySel) | \ ((uint32_t)sAlarm->AlarmMask)); } #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* Configure the Alarm A or Alarm B Sub Second registers */ subsecondtmpreg = (uint32_t)((uint32_t)(sAlarm->AlarmTime.SubSeconds) | (uint32_t)(sAlarm->AlarmSubSecondMask)); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Configure the Alarm register */ if(sAlarm->Alarm == RTC_ALARM_A) { /* Disable the Alarm A interrupt */ __HAL_RTC_ALARMA_DISABLE(hrtc); /* Clear flag alarm A */ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRAF); tickstart = HAL_GetTick(); /* Wait till RTC ALRAWF flag is set and if Time out is reached exit */ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRAWF) == RESET) { if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } hrtc->Instance->ALRMAR = (uint32_t)tmpreg; #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* Configure the Alarm A Sub Second register */ hrtc->Instance->ALRMASSR = subsecondtmpreg; #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Configure the Alarm state: Enable Alarm */ __HAL_RTC_ALARMA_ENABLE(hrtc); /* Configure the Alarm interrupt */ __HAL_RTC_ALARM_ENABLE_IT(hrtc,RTC_IT_ALRA); } else { /* Disable the Alarm B interrupt */ __HAL_RTC_ALARMB_DISABLE(hrtc); /* Clear flag alarm B */ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF); tickstart = HAL_GetTick(); /* Wait till RTC ALRBWF flag is set and if Time out is reached exit */ while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBWF) == RESET) { if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } hrtc->Instance->ALRMBR = (uint32_t)tmpreg; #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* Configure the Alarm B Sub Second register */ hrtc->Instance->ALRMBSSR = subsecondtmpreg; #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Configure the Alarm state: Enable Alarm */ __HAL_RTC_ALARMB_ENABLE(hrtc); /* Configure the Alarm interrupt */ __HAL_RTC_ALARM_ENABLE_IT(hrtc, RTC_IT_ALRB); } /* RTC Alarm Interrupt Configuration: EXTI configuration */ __HAL_RTC_ENABLE_IT(RTC_EXTI_LINE_ALARM_EVENT); EXTI->RTSR |= RTC_EXTI_LINE_ALARM_EVENT; /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Gets the RTC Alarm value and masks. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param sAlarm: Pointer to Date structure * @param Alarm: Specifies the Alarm. * This parameter can be one of the following values: * @arg RTC_ALARM_A: AlarmA * @arg RTC_ALARM_B: AlarmB * @param Format: Specifies the format of the entered parameters. * This parameter can be one of the following values: * @arg FORMAT_BIN: Binary data format * @arg FORMAT_BCD: BCD data format * @retval HAL status */ HAL_StatusTypeDef HAL_RTC_GetAlarm(RTC_HandleTypeDef *hrtc, RTC_AlarmTypeDef *sAlarm, uint32_t Alarm, uint32_t Format) { uint32_t tmpreg = 0; #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) uint32_t subsecondtmpreg = 0; #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Check the parameters */ assert_param(IS_RTC_FORMAT(Format)); assert_param(IS_ALARM(Alarm)); if(Alarm == RTC_ALARM_A) { /* AlarmA */ sAlarm->Alarm = RTC_ALARM_A; tmpreg = (uint32_t)(hrtc->Instance->ALRMAR); #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMASSR) & RTC_ALRMASSR_SS); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ } else { sAlarm->Alarm = RTC_ALARM_B; tmpreg = (uint32_t)(hrtc->Instance->ALRMBR); #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) subsecondtmpreg = (uint32_t)((hrtc->Instance->ALRMBSSR) & RTC_ALRMBSSR_SS); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ } /* Fill the structure with the read parameters */ sAlarm->AlarmTime.Hours = (uint32_t)((tmpreg & (RTC_ALRMAR_HT | RTC_ALRMAR_HU)) >> 16); sAlarm->AlarmTime.Minutes = (uint32_t)((tmpreg & (RTC_ALRMAR_MNT | RTC_ALRMAR_MNU)) >> 8); sAlarm->AlarmTime.Seconds = (uint32_t)(tmpreg & (RTC_ALRMAR_ST | RTC_ALRMAR_SU)); sAlarm->AlarmTime.TimeFormat = (uint32_t)((tmpreg & RTC_ALRMAR_PM) >> 16); #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) sAlarm->AlarmTime.SubSeconds = (uint32_t) subsecondtmpreg; #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ sAlarm->AlarmDateWeekDay = (uint32_t)((tmpreg & (RTC_ALRMAR_DT | RTC_ALRMAR_DU)) >> 24); sAlarm->AlarmDateWeekDaySel = (uint32_t)(tmpreg & RTC_ALRMAR_WDSEL); sAlarm->AlarmMask = (uint32_t)(tmpreg & RTC_ALARMMASK_ALL); if(Format == FORMAT_BIN) { sAlarm->AlarmTime.Hours = RTC_Bcd2ToByte(sAlarm->AlarmTime.Hours); sAlarm->AlarmTime.Minutes = RTC_Bcd2ToByte(sAlarm->AlarmTime.Minutes); sAlarm->AlarmTime.Seconds = RTC_Bcd2ToByte(sAlarm->AlarmTime.Seconds); sAlarm->AlarmDateWeekDay = RTC_Bcd2ToByte(sAlarm->AlarmDateWeekDay); } return HAL_OK; } /** * @} */ /** @defgroup RTC_Exported_Functions_Group6 Peripheral Control functions * @brief Peripheral Control functions * @verbatim =============================================================================== ##### Peripheral Control functions ##### =============================================================================== [..] This subsection provides functions allowing to (+) Wait for RTC Time and Date Synchronization @endverbatim * @{ */ /** * @brief Waits until the RTC Time and Date registers (RTC_TR and RTC_DR) are * synchronized with RTC APB clock. * @note The RTC Resynchronization mode is write protected, use the * __HAL_RTC_WRITEPROTECTION_DISABLE() before calling this function. * @note To read the calendar through the shadow registers after Calendar * initialization, calendar update or after wakeup from low power modes * the software must first clear the RSF flag. * The software must then wait until it is set again before reading * the calendar, which means that the calendar registers have been * correctly copied into the RTC_TR and RTC_DR shadow registers. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval HAL status */ HAL_StatusTypeDef HAL_RTC_WaitForSynchro(RTC_HandleTypeDef* hrtc) { uint32_t tickstart = 0; #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* If RTC_CR_BYPSHAD bit = 0, wait for synchro else this check is not needed */ if((hrtc->Instance->CR & RTC_CR_BYPSHAD) == RESET) #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ { /* Clear RSF flag */ hrtc->Instance->ISR &= (uint32_t)RTC_RSF_MASK; tickstart = HAL_GetTick(); /* Wait the registers to be synchronised */ while((hrtc->Instance->ISR & RTC_ISR_RSF) == (uint32_t)RESET) { if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) { return HAL_TIMEOUT; } } } return HAL_OK; } /** * @} */ /** * @} */ /** * @} */ /** @defgroup RTCEx RTCEx * @brief RTC Extended HAL module driver * @{ */ /** @defgroup RTCEx_Exported_Functions RTCEx Exported Functions * @{ */ /** @defgroup RTCEx_Exported_Functions_Group4 RTC TimeStamp and Tamper functions * @brief RTC TimeStamp and Tamper functions * @verbatim =============================================================================== ##### RTC TimeStamp and Tamper functions ##### =============================================================================== [..] This section provides functions allowing to configure TimeStamp feature @endverbatim * @{ */ /** * @brief Sets TimeStamp. * @note This API must be called before enabling the TimeStamp feature. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param TimeStampEdge: Specifies the pin edge on which the TimeStamp is * activated. * This parameter can be one of the following values: * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the * rising edge of the related pin. * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the * falling edge of the related pin. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge) { uint32_t tmpreg = 0; /* Check the parameters */ assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Get the RTC_CR register and clear the bits to be configured */ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); tmpreg|= TimeStampEdge; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Configure the Time Stamp TSEDGE and Enable bits */ hrtc->Instance->CR = (uint32_t)tmpreg; __HAL_RTC_TIMESTAMP_ENABLE(hrtc); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Sets TimeStamp with Interrupt. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @note This API must be called before enabling the TimeStamp feature. * @param TimeStampEdge: Specifies the pin edge on which the TimeStamp is * activated. * This parameter can be one of the following values: * @arg RTC_TIMESTAMPEDGE_RISING: the Time stamp event occurs on the * rising edge of the related pin. * @arg RTC_TIMESTAMPEDGE_FALLING: the Time stamp event occurs on the * falling edge of the related pin. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetTimeStamp_IT(RTC_HandleTypeDef *hrtc, uint32_t TimeStampEdge) { uint32_t tmpreg = 0; /* Check the parameters */ assert_param(IS_TIMESTAMP_EDGE(TimeStampEdge)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Get the RTC_CR register and clear the bits to be configured */ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); tmpreg |= TimeStampEdge; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Configure the Time Stamp TSEDGE and Enable bits */ hrtc->Instance->CR = (uint32_t)tmpreg; __HAL_RTC_TIMESTAMP_ENABLE(hrtc); /* Enable IT timestamp */ __HAL_RTC_TIMESTAMP_ENABLE_IT(hrtc,RTC_IT_TS); /* RTC timestamp Interrupt Configuration: EXTI configuration */ __HAL_RTC_ENABLE_IT(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT); EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT; /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Deactivates TimeStamp. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateTimeStamp(RTC_HandleTypeDef *hrtc) { uint32_t tmpreg = 0; /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* In case of interrupt mode is used, the interrupt source must disabled */ __HAL_RTC_TIMESTAMP_DISABLE_IT(hrtc, RTC_IT_TS); /* Get the RTC_CR register and clear the bits to be configured */ tmpreg = (uint32_t)(hrtc->Instance->CR & (uint32_t)~(RTC_CR_TSEDGE | RTC_CR_TSE)); /* Configure the Time Stamp TSEDGE and Enable bits */ hrtc->Instance->CR = (uint32_t)tmpreg; /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Gets the RTC TimeStamp value. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param sTimeStamp: Pointer to Time structure * @param sTimeStampDate: Pointer to Date structure * @param Format: specifies the format of the entered parameters. * This parameter can be one of the following values: * FORMAT_BIN: Binary data format * FORMAT_BCD: BCD data format * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_GetTimeStamp(RTC_HandleTypeDef *hrtc, RTC_TimeTypeDef* sTimeStamp, RTC_DateTypeDef* sTimeStampDate, uint32_t Format) { uint32_t tmptime = 0, tmpdate = 0; /* Check the parameters */ assert_param(IS_RTC_FORMAT(Format)); /* Get the TimeStamp time and date registers values */ tmptime = (uint32_t)(hrtc->Instance->TSTR & RTC_TR_RESERVED_MASK); tmpdate = (uint32_t)(hrtc->Instance->TSDR & RTC_DR_RESERVED_MASK); /* Fill the Time structure fields with the read parameters */ sTimeStamp->Hours = (uint8_t)((tmptime & (RTC_TR_HT | RTC_TR_HU)) >> 16); sTimeStamp->Minutes = (uint8_t)((tmptime & (RTC_TR_MNT | RTC_TR_MNU)) >> 8); sTimeStamp->Seconds = (uint8_t)(tmptime & (RTC_TR_ST | RTC_TR_SU)); sTimeStamp->TimeFormat = (uint8_t)((tmptime & (RTC_TR_PM)) >> 16); #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) sTimeStamp->SubSeconds = (uint32_t)((hrtc->Instance->TSSSR) & RTC_TSSSR_SS); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Fill the Date structure fields with the read parameters */ sTimeStampDate->Year = 0; sTimeStampDate->Month = (uint8_t)((tmpdate & (RTC_DR_MT | RTC_DR_MU)) >> 8); sTimeStampDate->Date = (uint8_t)(tmpdate & (RTC_DR_DT | RTC_DR_DU)); sTimeStampDate->WeekDay = (uint8_t)((tmpdate & (RTC_DR_WDU)) >> 13); /* Check the input parameters format */ if(Format == FORMAT_BIN) { /* Convert the TimeStamp structure parameters to Binary format */ sTimeStamp->Hours = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Hours); sTimeStamp->Minutes = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Minutes); sTimeStamp->Seconds = (uint8_t)RTC_Bcd2ToByte(sTimeStamp->Seconds); /* Convert the DateTimeStamp structure parameters to Binary format */ sTimeStampDate->Month = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Month); sTimeStampDate->Date = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->Date); sTimeStampDate->WeekDay = (uint8_t)RTC_Bcd2ToByte(sTimeStampDate->WeekDay); } /* Clear the TIMESTAMP Flag */ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSF); return HAL_OK; } /** * @brief Sets Tamper * @note By calling this API we disable the tamper interrupt for all tampers. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param sTamper: Pointer to Tamper Structure. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetTamper(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper) { uint32_t tmpreg = 0; /* Check the parameters */ assert_param(IS_TAMPER(sTamper->Tamper)); assert_param(IS_TAMPER_TRIGGER(sTamper->Trigger)); #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) assert_param(IS_TAMPER_FILTER(sTamper->Filter)); assert_param(IS_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); assert_param(IS_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); assert_param(IS_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); assert_param(IS_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) if((sTamper->Trigger == RTC_TAMPERTRIGGER_RISINGEDGE)) { /* Configure the RTC_TAFCR register */ sTamper->Trigger = RTC_TAMPERTRIGGER_RISINGEDGE; } else { sTamper->Trigger = (uint32_t)(sTamper->Tamper << 1); } tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger | (uint32_t)sTamper->Filter |\ (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\ (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection); hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1) | (uint32_t)RTC_TAFCR_TAMPTS |\ (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\ (uint32_t)RTC_TAFCR_TAMPPUDIS | (uint32_t)RTC_TAFCR_TAMPIE); #else tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Trigger)); hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)RTC_TAFCR_TAMP1E | (uint32_t)RTC_TAFCR_TAMP1TRG); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ hrtc->Instance->TAFCR |= tmpreg; hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Sets Tamper with interrupt. * @note By calling this API we force the tamper interrupt for all tampers. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param sTamper: Pointer to RTC Tamper. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetTamper_IT(RTC_HandleTypeDef *hrtc, RTC_TamperTypeDef* sTamper) { uint32_t tmpreg = 0; /* Check the parameters */ assert_param(IS_TAMPER(sTamper->Tamper)); assert_param(IS_TAMPER_TRIGGER(sTamper->Trigger)); #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) assert_param(IS_TAMPER_FILTER(sTamper->Filter)); assert_param(IS_TAMPER_SAMPLING_FREQ(sTamper->SamplingFrequency)); assert_param(IS_TAMPER_PRECHARGE_DURATION(sTamper->PrechargeDuration)); assert_param(IS_TAMPER_PULLUP_STATE(sTamper->TamperPullUp)); assert_param(IS_TAMPER_TIMESTAMPONTAMPER_DETECTION(sTamper->TimeStampOnTamperDetection)); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* Configure the tamper trigger */ if((sTamper->Trigger == RTC_TAMPERTRIGGER_RISINGEDGE)) { sTamper->Trigger = RTC_TAMPERTRIGGER_RISINGEDGE; } else { sTamper->Trigger = (uint32_t) (sTamper->Tamper<<1); } tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger | (uint32_t)sTamper->Filter |\ (uint32_t)sTamper->SamplingFrequency | (uint32_t)sTamper->PrechargeDuration |\ (uint32_t)sTamper->TamperPullUp | sTamper->TimeStampOnTamperDetection); hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)sTamper->Tamper | (uint32_t)(sTamper->Tamper << 1) | (uint32_t)RTC_TAFCR_TAMPTS |\ (uint32_t)RTC_TAFCR_TAMPFREQ | (uint32_t)RTC_TAFCR_TAMPFLT | (uint32_t)RTC_TAFCR_TAMPPRCH |\ (uint32_t)RTC_TAFCR_TAMPPUDIS); #else tmpreg = ((uint32_t)sTamper->Tamper | (uint32_t)sTamper->Trigger); hrtc->Instance->TAFCR &= (uint32_t)~((uint32_t)RTC_TAFCR_TAMP1E | (uint32_t)RTC_TAFCR_TAMP1TRG | (uint32_t)RTC_TAFCR_TAMPIE); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ hrtc->Instance->TAFCR |= tmpreg; /* Configure the Tamper Interrupt in the RTC_TAFCR */ hrtc->Instance->TAFCR |= (uint32_t)RTC_TAFCR_TAMPIE; /* RTC Tamper Interrupt Configuration: EXTI configuration */ __HAL_RTC_ENABLE_IT(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT); EXTI->RTSR |= RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT; hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Deactivates Tamper. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param Tamper: Selected tamper pin. * This parameter can be a value of @ref RTCEx_Tamper_Pins_Definitions * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateTamper(RTC_HandleTypeDef *hrtc, uint32_t Tamper) { assert_param(IS_TAMPER(Tamper)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the selected Tamper pin */ hrtc->Instance->TAFCR &= (uint32_t)~Tamper; hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief This function handles TimeStamp interrupt request. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval None */ void HAL_RTCEx_TamperTimeStampIRQHandler(RTC_HandleTypeDef *hrtc) { if(__HAL_RTC_TIMESTAMP_GET_IT(hrtc, RTC_IT_TS)) { /* Get the status of the Interrupt */ if((uint32_t)(hrtc->Instance->CR & RTC_IT_TS) != (uint32_t)RESET) { /* TIMESTAMP callback */ HAL_RTCEx_TimeStampEventCallback(hrtc); /* Clear the TIMESTAMP interrupt pending bit */ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc,RTC_FLAG_TSF); } } /* Get the status of the Interrupt */ if(__HAL_RTC_TAMPER_GET_IT(hrtc,RTC_IT_TAMP1)) { /* Get the TAMPER Interrupt enable bit and pending bit */ if(((hrtc->Instance->TAFCR & (RTC_TAFCR_TAMPIE))) != (uint32_t)RESET) { /* Tamper callback */ HAL_RTCEx_Tamper1EventCallback(hrtc); /* Clear the Tamper interrupt pending bit */ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F); } } #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* Get the status of the Interrupt */ if(__HAL_RTC_TAMPER_GET_IT(hrtc, RTC_IT_TAMP2)) { /* Get the TAMPER Interrupt enable bit and pending bit */ if(((hrtc->Instance->TAFCR & RTC_TAFCR_TAMPIE)) != (uint32_t)RESET) { /* Tamper callback */ HAL_RTCEx_Tamper2EventCallback(hrtc); /* Clear the Tamper interrupt pending bit */ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP2F); } } /* Get the status of the Interrupt */ if(__HAL_RTC_TAMPER_GET_IT(hrtc, RTC_IT_TAMP3)) { /* Get the TAMPER Interrupt enable bit and pending bit */ if(((hrtc->Instance->TAFCR & RTC_TAFCR_TAMPIE)) != (uint32_t)RESET) { /* Tamper callback */ HAL_RTCEx_Tamper3EventCallback(hrtc); /* Clear the Tamper interrupt pending bit */ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc, RTC_FLAG_TAMP3F); } } #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Clear the EXTI s Flag for RTC TimeStamp and Tamper */ __HAL_RTC_CLEAR_FLAG(RTC_EXTI_LINE_TAMPER_TIMESTAMP_EVENT); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; } /** * @brief TimeStamp callback. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval None */ __weak void HAL_RTCEx_TimeStampEventCallback(RTC_HandleTypeDef *hrtc) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_RTCEx_TimeStampEventCallback could be implemented in the user file */ } /** * @brief Tamper 1 callback. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval None */ __weak void HAL_RTCEx_Tamper1EventCallback(RTC_HandleTypeDef *hrtc) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_RTCEx_Tamper1EventCallback could be implemented in the user file */ } #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /** * @brief Tamper 2 callback. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval None */ __weak void HAL_RTCEx_Tamper2EventCallback(RTC_HandleTypeDef *hrtc) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_RTCEx_Tamper2EventCallback could be implemented in the user file */ } /** * @brief Tamper 3 callback. * @param hrtc: RTC handle * @retval None */ __weak void HAL_RTCEx_Tamper3EventCallback(RTC_HandleTypeDef *hrtc) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_RTCEx_Tamper3EventCallback could be implemented in the user file */ } #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /** * @brief This function handles TimeStamp polling request. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param Timeout: Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_PollForTimeStampEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) { uint32_t tickstart = HAL_GetTick(); while(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSF) == RESET) { if(__HAL_RTC_TIMESTAMP_GET_FLAG(hrtc, RTC_FLAG_TSOVF) != RESET) { /* Clear the TIMESTAMP OverRun Flag */ __HAL_RTC_TIMESTAMP_CLEAR_FLAG(hrtc, RTC_FLAG_TSOVF); /* Change TIMESTAMP state */ hrtc->State = HAL_RTC_STATE_ERROR; return HAL_ERROR; } if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) { hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } } /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; return HAL_OK; } /** * @brief This function handles Tamper1 Polling. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param Timeout: Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_PollForTamper1Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout) { uint32_t tickstart = HAL_GetTick(); /* Get the status of the Interrupt */ while(__HAL_RTC_TAMPER_GET_FLAG(hrtc,RTC_FLAG_TAMP1F)== RESET) { if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) { hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } } /* Clear the Tamper Flag */ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP1F); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; return HAL_OK; } #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /** * @brief This function handles Tamper2 Polling. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param Timeout: Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_PollForTamper2Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout) { uint32_t tickstart = HAL_GetTick(); /* Get the status of the Interrupt */ while(__HAL_RTC_TAMPER_GET_FLAG(hrtc,RTC_FLAG_TAMP2F) == RESET) { if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) { hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } } /* Clear the Tamper Flag */ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP2F); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; return HAL_OK; } /** * @brief This function handles Tamper3 Polling. * @param hrtc: RTC handle * @param Timeout: Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_PollForTamper3Event(RTC_HandleTypeDef *hrtc, uint32_t Timeout) { uint32_t tickstart = HAL_GetTick(); /* Get the status of the Interrupt */ while(__HAL_RTC_TAMPER_GET_FLAG(hrtc,RTC_FLAG_TAMP3F) == RESET) { if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) { hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } } /* Clear the Tamper Flag */ __HAL_RTC_TAMPER_CLEAR_FLAG(hrtc,RTC_FLAG_TAMP3F); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; return HAL_OK; } #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /** * @} */ /** @defgroup RTCEx_Exported_Functions_Group5 RTC Wake-up functions * @brief RTC Wake-up functions * @verbatim =============================================================================== ##### RTC Wake-up functions ##### =============================================================================== [..] This section provides functions allowing to configure Wake-up feature @endverbatim * @{ */ /** * @brief Sets wake up timer. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param WakeUpCounter: Wake up counter * @param WakeUpClock: Wake up clock * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) { uint32_t tickstart = 0; /* Check the parameters */ assert_param(IS_WAKEUP_CLOCK(WakeUpClock)); assert_param(IS_WAKEUP_COUNTER(WakeUpCounter)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); tickstart = HAL_GetTick(); /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET) { if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } /* Clear the Wakeup Timer clock source bits in CR register */ hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; /* Configure the clock source */ hrtc->Instance->CR |= (uint32_t)WakeUpClock; /* Configure the Wakeup Timer counter */ hrtc->Instance->WUTR = (uint32_t)WakeUpCounter; /* Enable the Wakeup Timer */ __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Sets wake up timer with interrupt * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param WakeUpCounter: Wake up counter * @param WakeUpClock: Wake up clock * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetWakeUpTimer_IT(RTC_HandleTypeDef *hrtc, uint32_t WakeUpCounter, uint32_t WakeUpClock) { uint32_t tickstart = 0; /* Check the parameters */ assert_param(IS_WAKEUP_CLOCK(WakeUpClock)); assert_param(IS_WAKEUP_COUNTER(WakeUpCounter)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); tickstart = HAL_GetTick(); /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET) { if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } /* Configure the Wakeup Timer counter */ hrtc->Instance->WUTR = (uint32_t)WakeUpCounter; /* Clear the Wakeup Timer clock source bits in CR register */ hrtc->Instance->CR &= (uint32_t)~RTC_CR_WUCKSEL; /* Configure the clock source */ hrtc->Instance->CR |= (uint32_t)WakeUpClock; /* RTC WakeUpTimer Interrupt Configuration: EXTI configuration */ __HAL_RTC_ENABLE_IT(RTC_EXTI_LINE_WAKEUPTIMER_EVENT); EXTI->RTSR |= RTC_EXTI_LINE_WAKEUPTIMER_EVENT; /* Configure the Interrupt in the RTC_CR register */ __HAL_RTC_WAKEUPTIMER_ENABLE_IT(hrtc,RTC_IT_WUT); /* Enable the Wakeup Timer */ __HAL_RTC_WAKEUPTIMER_ENABLE(hrtc); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Deactivates wake up timer counter. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval HAL status */ uint32_t HAL_RTCEx_DeactivateWakeUpTimer(RTC_HandleTypeDef *hrtc) { uint32_t tickstart = 0; /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Disable the Wakeup Timer */ __HAL_RTC_WAKEUPTIMER_DISABLE(hrtc); /* In case of interrupt mode is used, the interrupt source must disabled */ __HAL_RTC_WAKEUPTIMER_DISABLE_IT(hrtc,RTC_IT_WUT); tickstart = HAL_GetTick(); /* Wait till RTC WUTWF flag is set and if Time out is reached exit */ while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTWF) == RESET) { if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Gets wake up timer counter. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval Counter value */ uint32_t HAL_RTCEx_GetWakeUpTimer(RTC_HandleTypeDef *hrtc) { /* Get the counter value */ return ((uint32_t)(hrtc->Instance->WUTR & RTC_WUTR_WUT)); } /** * @brief This function handles Wake Up Timer interrupt request. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval None */ void HAL_RTCEx_WakeUpTimerIRQHandler(RTC_HandleTypeDef *hrtc) { if(__HAL_RTC_WAKEUPTIMER_GET_IT(hrtc, RTC_IT_WUT)) { /* Get the status of the Interrupt */ if((uint32_t)(hrtc->Instance->CR & RTC_IT_WUT) != (uint32_t)RESET) { /* WAKEUPTIMER callback */ HAL_RTCEx_WakeUpTimerEventCallback(hrtc); /* Clear the WAKEUPTIMER interrupt pending bit */ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); } } /* Clear the EXTI s line Flag for RTC WakeUpTimer */ __HAL_RTC_CLEAR_FLAG(RTC_EXTI_LINE_WAKEUPTIMER_EVENT); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; } /** * @brief Wake Up Timer callback. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval None */ __weak void HAL_RTCEx_WakeUpTimerEventCallback(RTC_HandleTypeDef *hrtc) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_RTCEx_WakeUpTimerEventCallback could be implemented in the user file */ } /** * @brief This function handles Wake Up Timer Polling. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param Timeout: Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_PollForWakeUpTimerEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) { uint32_t tickstart = HAL_GetTick(); while(__HAL_RTC_WAKEUPTIMER_GET_FLAG(hrtc, RTC_FLAG_WUTF) == RESET) { if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) { hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } } /* Clear the WAKEUPTIMER Flag */ __HAL_RTC_WAKEUPTIMER_CLEAR_FLAG(hrtc, RTC_FLAG_WUTF); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; return HAL_OK; } /** * @} */ /** @defgroup RTCEx_Exported_Functions_Group7 Extended Peripheral Control functions * @brief Extended Peripheral Control functions * @verbatim =============================================================================== ##### Extension Peripheral Control functions ##### =============================================================================== [..] This subsection provides functions allowing to (+) Writes a data in a specified RTC Backup data register (+) Read a data in a specified RTC Backup data register (+) Sets the Coarse calibration parameters. (+) Deactivates the Coarse calibration parameters (+) Sets the Smooth calibration parameters. (+) Configures the Synchronization Shift Control Settings. (+) Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). (+) Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). (+) Enables the RTC reference clock detection. (+) Disable the RTC reference clock detection. (+) Enables the Bypass Shadow feature. (+) Disables the Bypass Shadow feature. @endverbatim * @{ */ /** * @brief Writes a data in a specified RTC Backup data register. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param BackupRegister: RTC Backup data Register number. * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to * specify the register. * @param Data: Data to be written in the specified RTC Backup data register. * @retval None */ void HAL_RTCEx_BKUPWrite(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister, uint32_t Data) { uint32_t tmp = 0; /* Check the parameters */ assert_param(IS_RTC_BKP(BackupRegister)); tmp = (uint32_t)&(hrtc->Instance->BKP0R); tmp += (BackupRegister * 4); /* Write the specified register */ *(__IO uint32_t *)tmp = (uint32_t)Data; } /** * @brief Reads data from the specified RTC Backup data Register. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param BackupRegister: RTC Backup data Register number. * This parameter can be: RTC_BKP_DRx where x can be from 0 to 19 to * specify the register. * @retval Read value */ uint32_t HAL_RTCEx_BKUPRead(RTC_HandleTypeDef *hrtc, uint32_t BackupRegister) { uint32_t tmp = 0; /* Check the parameters */ assert_param(IS_RTC_BKP(BackupRegister)); tmp = (uint32_t)&(hrtc->Instance->BKP0R); tmp += (BackupRegister * 4); /* Read the specified register */ return (*(__IO uint32_t *)tmp); } /** * @brief Sets the Coarse calibration parameters. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param CalibSign: Specifies the sign of the coarse calibration value. * This parameter can be one of the following values : * @arg RTC_CALIBSIGN_POSITIVE: The value sign is positive * @arg RTC_CALIBSIGN_NEGATIVE: The value sign is negative * @param Value: value of coarse calibration expressed in ppm (coded on 5 bits). * * @note This Calibration value should be between 0 and 63 when using negative * sign with a 2-ppm step. * * @note This Calibration value should be between 0 and 126 when using positive * sign with a 4-ppm step. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetCoarseCalib(RTC_HandleTypeDef* hrtc, uint32_t CalibSign, uint32_t Value) { /* Check the parameters */ assert_param(IS_RTC_CALIB_SIGN(CalibSign)); assert_param(IS_RTC_CALIB_VALUE(Value)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Set Initialization mode */ if(RTC_EnterInitMode(hrtc) != HAL_OK) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Set RTC state*/ hrtc->State = HAL_RTC_STATE_ERROR; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_ERROR; } else { /* Enable the Coarse Calibration */ __HAL_RTC_COARSE_CALIB_ENABLE(hrtc); /* Set the coarse calibration value */ hrtc->Instance->CALIBR = (uint32_t)(CalibSign|Value); /* Exit Initialization mode */ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; } /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Deactivates the Coarse calibration parameters. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateCoarseCalib(RTC_HandleTypeDef* hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Set Initialization mode */ if(RTC_EnterInitMode(hrtc) != HAL_OK) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Set RTC state*/ hrtc->State = HAL_RTC_STATE_ERROR; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_ERROR; } else { /* Enable the Coarse Calibration */ __HAL_RTC_COARSE_CALIB_DISABLE(hrtc); /* Exit Initialization mode */ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; } /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /** * @brief Sets the Smooth calibration parameters. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param SmoothCalibPeriod: Select the Smooth Calibration Period. * This parameter can be can be one of the following values : * @arg RTC_SMOOTHCALIB_PERIOD_32SEC: The smooth calibration periode is 32s. * @arg RTC_SMOOTHCALIB_PERIOD_16SEC: The smooth calibration periode is 16s. * @arg RTC_SMOOTHCALIB_PERIOD_8SEC: The smooth calibartion periode is 8s. * @param SmoothCalibPlusPulses: Select to Set or reset the CALP bit. * This parameter can be one of the following values: * @arg RTC_SMOOTHCALIB_PLUSPULSES_SET: Add one RTCCLK puls every 2*11 pulses. * @arg RTC_SMOOTHCALIB_PLUSPULSES_RESET: No RTCCLK pulses are added. * @param SmouthCalibMinusPulsesValue: Select the value of CALM[8:0] bits. * This parameter can be one any value from 0 to 0x000001FF. * @note To deactivate the smooth calibration, the field SmoothCalibPlusPulses * must be equal to SMOOTHCALIB_PLUSPULSES_RESET and the field * SmouthCalibMinusPulsesValue must be equal to 0. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetSmoothCalib(RTC_HandleTypeDef* hrtc, uint32_t SmoothCalibPeriod, uint32_t SmoothCalibPlusPulses, uint32_t SmouthCalibMinusPulsesValue) { uint32_t tickstart = 0; /* Check the parameters */ assert_param(IS_RTC_SMOOTH_CALIB_PERIOD(SmoothCalibPeriod)); assert_param(IS_RTC_SMOOTH_CALIB_PLUS(SmoothCalibPlusPulses)); assert_param(IS_RTC_SMOOTH_CALIB_MINUS(SmouthCalibMinusPulsesValue)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* check if a calibration is pending*/ if((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET) { tickstart = HAL_GetTick(); /* check if a calibration is pending*/ while((hrtc->Instance->ISR & RTC_ISR_RECALPF) != RESET) { if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } } /* Configure the Smooth calibration settings */ hrtc->Instance->CALR = (uint32_t)((uint32_t)SmoothCalibPeriod | (uint32_t)SmoothCalibPlusPulses | (uint32_t)SmouthCalibMinusPulsesValue); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Configures the Synchronization Shift Control Settings. * @note When REFCKON is set, firmware must not write to Shift control register. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param ShiftAdd1S: Select to add or not 1 second to the time calendar. * This parameter can be one of the following values : * @arg RTC_SHIFTADD1S_SET: Add one second to the clock calendar. * @arg RTC_SHIFTADD1S_RESET: No effect. * @param ShiftSubFS: Select the number of Second Fractions to substitute. * This parameter can be one any value from 0 to 0x7FFF. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetSynchroShift(RTC_HandleTypeDef* hrtc, uint32_t ShiftAdd1S, uint32_t ShiftSubFS) { uint32_t tickstart = 0; /* Check the parameters */ assert_param(IS_RTC_SHIFT_ADD1S(ShiftAdd1S)); assert_param(IS_RTC_SHIFT_SUBFS(ShiftSubFS)); /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); tickstart = HAL_GetTick(); /* Wait until the shift is completed*/ while((hrtc->Instance->ISR & RTC_ISR_SHPF) != RESET) { if((HAL_GetTick() - tickstart ) > RTC_TIMEOUT_VALUE) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_TIMEOUT; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_TIMEOUT; } } /* Check if the reference clock detection is disabled */ if((hrtc->Instance->CR & RTC_CR_REFCKON) == RESET) { /* Configure the Shift settings */ hrtc->Instance->SHIFTR = (uint32_t)(uint32_t)(ShiftSubFS) | (uint32_t)(ShiftAdd1S); /* Wait for synchro */ if(HAL_RTC_WaitForSynchro(hrtc) != HAL_OK) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); hrtc->State = HAL_RTC_STATE_ERROR; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_ERROR; } } else { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_ERROR; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_ERROR; } /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /** * @brief Configures the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param CalibOutput : Select the Calibration output Selection . * This parameter can be one of the following values: * @arg RTC_CALIBOUTPUT_512HZ: A signal has a regular waveform at 512Hz. * @arg RTC_CALIBOUTPUT_1HZ: A signal has a regular waveform at 1Hz. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc, uint32_t CalibOutput) #else /** * @brief Configure the Calibration Pinout (RTC_CALIB). * @param hrtc : RTC handle * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetCalibrationOutPut(RTC_HandleTypeDef* hrtc) #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ { #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* Check the parameters */ assert_param(IS_RTC_CALIB_OUTPUT(CalibOutput)); #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /* Clear flags before config */ hrtc->Instance->CR &= (uint32_t)~RTC_CR_COSEL; /* Configure the RTC_CR register */ hrtc->Instance->CR |= (uint32_t)CalibOutput; #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ __HAL_RTC_CALIBRATION_OUTPUT_ENABLE(hrtc); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Deactivates the Calibration Pinout (RTC_CALIB) Selection (1Hz or 512Hz). * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateCalibrationOutPut(RTC_HandleTypeDef* hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); __HAL_RTC_CALIBRATION_OUTPUT_DISABLE(hrtc); /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Enables the RTC reference clock detection. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_SetRefClock(RTC_HandleTypeDef* hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Set Initialization mode */ if(RTC_EnterInitMode(hrtc) != HAL_OK) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Set RTC state*/ hrtc->State = HAL_RTC_STATE_ERROR; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_ERROR; } else { __HAL_RTC_CLOCKREF_DETECTION_ENABLE(hrtc); /* Exit Initialization mode */ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; } /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Disable the RTC reference clock detection. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DeactivateRefClock(RTC_HandleTypeDef* hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Set Initialization mode */ if(RTC_EnterInitMode(hrtc) != HAL_OK) { /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Set RTC state*/ hrtc->State = HAL_RTC_STATE_ERROR; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_ERROR; } else { __HAL_RTC_CLOCKREF_DETECTION_DISABLE(hrtc); /* Exit Initialization mode */ hrtc->Instance->ISR &= (uint32_t)~RTC_ISR_INIT; } /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } #if defined(STM32L100xBA) || defined (STM32L151xBA) || defined (STM32L152xBA) || defined(STM32L100xC) || defined (STM32L151xC) || defined (STM32L152xC) || defined (STM32L162xC) || defined(STM32L151xCA) || defined (STM32L151xD) || defined (STM32L152xCA) || defined (STM32L152xD) || defined (STM32L162xCA) || defined (STM32L162xD) || defined(STM32L151xE) || defined (STM32L152xE) || defined (STM32L162xE) /** * @brief Enables the Bypass Shadow feature. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @note When the Bypass Shadow is enabled the calendar value are taken * directly from the Calendar counter. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_EnableBypassShadow(RTC_HandleTypeDef* hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Set the BYPSHAD bit */ hrtc->Instance->CR |= (uint8_t)RTC_CR_BYPSHAD; /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } /** * @brief Disables the Bypass Shadow feature. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @note When the Bypass Shadow is enabled the calendar value are taken * directly from the Calendar counter. * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_DisableBypassShadow(RTC_HandleTypeDef* hrtc) { /* Process Locked */ __HAL_LOCK(hrtc); hrtc->State = HAL_RTC_STATE_BUSY; /* Disable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_DISABLE(hrtc); /* Reset the BYPSHAD bit */ hrtc->Instance->CR &= (uint8_t)~RTC_CR_BYPSHAD; /* Enable the write protection for RTC registers */ __HAL_RTC_WRITEPROTECTION_ENABLE(hrtc); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; /* Process Unlocked */ __HAL_UNLOCK(hrtc); return HAL_OK; } #endif /* STM32L100xBA || STM32L151xBA || STM32L152xBA || STM32L100xC || STM32L151xC || STM32L152xC || STM32L162xC || STM32L151xCA || STM32L151xD || STM32L152xCA || STM32L152xD || STM32L162xCA || STM32L162xD || STM32L151xE || STM32L152xE || STM32L162xE */ /** * @} */ /** @defgroup RTCEx_Exported_Functions_Group8 Extended features functions * @brief Extended features functions * @verbatim =============================================================================== ##### Extended features functions ##### =============================================================================== [..] This section provides functions allowing to: (+) RTC Alram B callback (+) RTC Poll for Alarm B request @endverbatim * @{ */ /** * @brief Alarm B callback. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @retval None */ __weak void HAL_RTCEx_AlarmBEventCallback(RTC_HandleTypeDef *hrtc) { /* NOTE : This function Should not be modified, when the callback is needed, the HAL_RTCEx_AlarmBEventCallback could be implemented in the user file */ } /** * @brief This function handles AlarmB Polling request. * @param hrtc: pointer to a RTC_HandleTypeDef structure that contains * the configuration information for RTC. * @param Timeout: Timeout duration * @retval HAL status */ HAL_StatusTypeDef HAL_RTCEx_PollForAlarmBEvent(RTC_HandleTypeDef *hrtc, uint32_t Timeout) { uint32_t tickstart = HAL_GetTick(); while(__HAL_RTC_ALARM_GET_FLAG(hrtc, RTC_FLAG_ALRBF) == RESET) { if(Timeout != HAL_MAX_DELAY) { if((Timeout == 0)||((HAL_GetTick() - tickstart ) > Timeout)) { hrtc->State = HAL_RTC_STATE_TIMEOUT; return HAL_TIMEOUT; } } } /* Clear the Alarm Flag */ __HAL_RTC_ALARM_CLEAR_FLAG(hrtc, RTC_FLAG_ALRBF); /* Change RTC state */ hrtc->State = HAL_RTC_STATE_READY; return HAL_OK; } /** * @} */ /** * @} */ /** * @} */ #endif /* HAL_RTC_MODULE_ENABLED */ /** * @} */ /************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/