# Teensy LC, 3.0, 3.1, 3.2 support
-These ARM Teensies are now supported through [chibios](http://chibios.org).
+These ARM Teensies are now supported through [ChibiOS](http://chibios.org).
-You'll need to install an ARM toolchain, for instance from [gcc ARM embedded](https://launchpad.net/gcc-arm-embedded) website, or using your favourite package manager. After installing, you should be able to run `arm-none-eabi-gcc -v` in the command prompt and get sensible output. This toolchain is used instead of `avr-gcc`, which is only for AVR chips. Naturally you'll also need the usual development tools (e.g. `make`), just as in the AVR setting.
+Follow the setup instructions in `tmk_core/protocol/chibios/README.md` to install ChibiOS and required toolchain.
-You'll need this fork/branch of TMK. If you're reading this from your own hard drive, then you already have it ;) Anyway, you can get a zip from [here](https://https://github.com/flabbergast/tmk_keyboard/archive/chibios.zip) {or clone this repo from github and checkout the `chibios` branch}.
-
-Next, you'll need ChibiOS. The current release (3.0.2) does not have sufficient Kinetis support, so you'll need to get a patched version from [my fork](https://github.com/flabbergast/ChibiOS/tree/kinetis): you can download a current tree zipped from [here](https://github.com/flabbergast/ChibiOS/archive/kinetis.zip) {or clone that repo from github and checkout the `kinetis` branch}. Unpack the zip, rename the newly created `ChibiOS-kinetis` to `chibios`, and move it to `tmk/tool/chibios/` (so that the ChibiOS files reside in `tmk/tool/chibios/chibios`).
-
-This should be it. Running `make` in `keyboard/teensy_lc_onekey` should create a working firmware in `build/`, called `ch.hex`.
+Running `make` in `keyboard/teensy_lc_onekey` should create a working firmware in `build/`, called `ch.hex`.
For more notes about the ChibiOS backend in TMK, see `tmk_core/protocol/chibios/README.md`.
## About this onekey example
-It's set up for Teensy LC. To use 3.x, you'll need to edit the `Makefile` (and comment out one line in `mcuconf.h`). A sample makefile for Teensy 3.0 is provided as `Makefile.3.0`, can be used without renaming with `make -f Makefile.3.0`.
+It's set up for Teensy LC. To use 3.x, you'll need to edit the `Makefile` (and comment out one line in `mcuconf.h`). A sample makefile for Teensy 3.0 is provided as `Makefile.3.0`, can be used without renaming with `make -f Makefile.3.0`. Similarly for Teensy 3.2, there's `Makefile.3.2`.
## Credits
## Features that are not implemented yet
-Currently only the more fancy suspend features are not there (i.e. "breathing" LED during suspend, power saving during suspend, sending a wakeup packet). The rest should work fine (reports either way are welcome).
+Currently only the more fancy suspend features are not there (power saving during suspend). The rest should work fine (reports either way are welcome).
# Matrix programming notes
palClearPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
+Toggling can be done with
+
+ palTogglePad(TEENSY_PINn_IOPORT, TEENSY_PINn);
+
+Alternatively, you can use
+
+ palWritePad(TEENSY_PINn_IOPORT, TEENSY_PINn, bit);
+
+where `bit` is either `PAL_LOW` or `PAL_HIGH` (i.e. `0` or `1`).
+
### Reading
Reading pin status is done with
palReadPad(TEENSY_PINn_IOPORT, TEENSY_PINn);
The function returns either `PAL_HIGH` (actually `1`) or `PAL_LOW` (actually `0`).
+
+### Further docs
+
+All the commands that are available for pin manipulation through ChibiOS HAL are documented in [ChibiOS PAL driver docs](http://chibios.sourceforge.net/docs3/hal/group___p_a_l.html).