adb_usb: Update README

[max/tmk_keyboard.git] / converter / ibm4704_usb / README.md

diff --git a/converter/ibm4704_usb/README.md b/converter/ibm4704_usb/README.md
index 68db4bd05004a6f7370a26f10da54a98e85e2de9..38478455d6dbc500e724167d5a06a8d270a34cc0 100644 (file)
--- a/converter/ibm4704_usb/README.md
+++ b/converter/ibm4704_usb/README.md
@@ -1,15 +1,17 @@
 IBM 4704 to USB keyboard converter
 ==================================
 This firmware converts IBM 4704 keyboard protocol to USB HID.
 IBM 4704 to USB keyboard converter
 ==================================
 This firmware converts IBM 4704 keyboard protocol to USB HID.

+Keyboard initialization process takes a few seconds at start up. **You may need to plug USB cable after hooking up your keyboard to the converter.**

 
 

-Keyboard initialization process takes a few seconds at start up. During that you will hear buzzer from the keyboard. **You need to plug USB cable after hooking up your keyboard to the converter.**
+TMK Converter for IBM4704 is available here: https://geekhack.org/index.php?topic=72052.0

 
 
 Update
 ------
 
 
 Update
 ------

-2015/09/07  Added keymap for Alps 102-key. Thanks, tai @ geekhack!
-2015/05/05  Added keymaps for 107-key, 77-key and 50-key. Thanks, orihalcon @ geekhack!
-2015/05/19  Fixed a protocol handling bug.
+- 2016/09/30  Unimap editor support
+- 2015/09/07  Added keymap for Alps 102-key. Thanks, tai @ geekhack!
+- 2015/05/05  Added keymaps for 107-key, 77-key and 50-key. Thanks, orihalcon @ geekhack!
+- 2015/05/19  Fixed a protocol handling bug.

 
 
 
 
 
 


@@ -47,22 +49,35 @@ Keyboard Plug from front:
 
 Connection
 ----------
 
 Connection
 ----------

-In case of using ATMega32U4(Teensy2.0):
+In case of using ATMega32U4/U2

 
 1. Supply power with VCC and GND.
 2. Connect CLOCK to PD1 and DATA to PD0. You can change pin with config.h.
 3. Optionally you may need pull-up register. 1KOhm probably work.
 
 
 1. Supply power with VCC and GND.
 2. Connect CLOCK to PD1 and DATA to PD0. You can change pin with config.h.
 3. Optionally you may need pull-up register. 1KOhm probably work.
 

+TMK Converter can supports IBM 4704.
+https://github.com/tmk/keyboard_converter
+

 
 Build Firmware
 --------------
 Just run `make`:
 
 
 Build Firmware
 --------------
 Just run `make`:
 

-    $ make
+    $ make -f <makefile>
+
+For TMK Converter rev.1 use `Makefile.rev1` as makefile:
+
+    $ make -f Makefile.rev1
+
+For TMK Converter rev.2 use `Makefile.rev2` as makefile:
+
+    $ make -f Makefile.rev2

 
 To select keymap:
 
 
 To select keymap:
 

-    $ make KEYMAP=[plain|...]
+    $ make -f <makefile> KEYMAP=[plain|alsp102key|...]
+
+To indentify your TMK Converter revision see [this](https://github.com/tmk/keyboard_converter#pcb-revisions).

 
 
 Keymap
 
 
 Keymap