-TMK designed [Keyboard Controller Board for HHKB Pro2(KiCad project)](https://github.com/tmk/HHKB_controller).
-See [this post](http://geekhack.org/index.php?topic=12047.msg948923#msg948923).
-
-
-###2. PJRC Teensy++ 2.0 connection
- +---------------+
- | Teensy++ |
- | |
- | | HHKB pro HHKB pro2
- | | ~~~~~~~~ ~~~~~~~~~
- | PB0-2|------->ROW (6-8) (5-7)
- | PB3-5|------->COL (9-11) (8-10)
- | PB6|------->ENABLE (12) (11)
- | PE6|<-------KEY (4) (3)
- | PE7|------->PREV (5) (4)
- | |
- | | 5V--- (1-3) (1-2)
- | | GND--- (13-14) (12-13)
- +---------------+
-
-- NOTE: PJRC [Teensy](http://www.pjrc.com/teensy/)
-
-###3. V-USB connection
- +---+ +---------------+
- USB GND | | ATmega328p |
- ~~~ C3 | |
- 5V <-------+--------+---|Vcc,AVCC | HHKB pro pro2
- R1 | | ~~~~~~~~ ~~~~
- D- <----+--+-----R2-----|INT1 PB2-4|------->ROW (6-8) (5-7)
- D+ <----|---+----R3-----|INT0 PC0-2|------->COL (9-11) (8-10)
- Z1 Z2 | PC3|------->ENABLE (12) (11)
- GND<----+---+-----------|GND PB0|<-------KEY (4) (3)
- | PB1|------->PREV (5) (4)
- | |
- GND+-C2--+--|XTAL1 RXD|------->Debug Console
- X1 | TXD|<-------Debug Console
- GND+-C3--+--|XTAL2 RST|---SW--+GND
- +---------------+
- R1: 1.5K Ohm
- R2,R3: 68 Ohm
- Z1,Z2: Zener 3.6V
- C1,C2: 22pF
- C3: 0.1uF
- X1: Crystal 12MHz
- SW: Push Switch(for bootloader)
-
-- NOTE: See [V-USB] documentation for more detail of hardware and the USB stack.
-- NOTE: [USBaspLoader] is very useful for firmware update.
+Design files are available at [Keyboard Controller Board for HHKB(KiCad project)](https://github.com/tmk/HHKB_controller) and see [Controller Distribution thread](http://geekhack.org/index.php?topic=56494.0) if you get an assembled one.
+
+
+###2. PJRC Teensy
+See [this thread](http://geekhack.org/index.php?topic=57008.0).
+
+
+###3. V-USB version
+See [V-USB controller for HHKB](doc/V-USB.md).