ibmpc_usb: Add prebuilt firmware files

[max/tmk_keyboard.git] / converter / adb_usb / Makefile

diff --git a/converter/adb_usb/Makefile b/converter/adb_usb/Makefile
index 7b385749d55302999c8683eb1a16f32572bd9d4b..fe94d9f7b8463cad9b5e9b762d3a2744d6ddc1e5 100644 (file)
--- a/converter/adb_usb/Makefile
+++ b/converter/adb_usb/Makefile
@@ -1,64 +1,16 @@
-#----------------------------------------------------------------------------
-# On command line:
-#
-# make all = Make software.
-#
-# make clean = Clean out built project files.
-#
-# make coff = Convert ELF to AVR COFF.
-#
-# make extcoff = Convert ELF to AVR Extended COFF.
-#
-# make program = Download the hex file to the device.
-#                Please customize your programmer settings(PROGRAM_CMD)
-#
-# make teensy = Download the hex file to the device, using teensy_loader_cli.
-#               (must have teensy_loader_cli installed).
-#
-# make dfu = Download the hex file to the device, using dfu-programmer (must
-#            have dfu-programmer installed).
-#
-# make flip = Download the hex file to the device, using Atmel FLIP (must
-#             have Atmel FLIP installed).
-#
-# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
-#               (must have dfu-programmer installed).
-#
-# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
-#                (must have Atmel FLIP installed).
-#
-# make debug = Start either simulavr or avarice as specified for debugging, 
-#              with avr-gdb or avr-insight as the front end for debugging.
-#
-# make filename.s = Just compile filename.c into the assembler code only.
-#
-# make filename.i = Create a preprocessed source file for use in submitting
-#                   bug reports to the GCC project.
-#
-# To rebuild project do "make clean" then "make all".
-#----------------------------------------------------------------------------
-
 # Target file name (without extension).
-TARGET = adb_usb_lufa
+TARGET ?= adb_usb
 
 # Directory common source filess exist
-TMK_DIR = ../../tmk_core
+TMK_DIR ?= ../../tmk_core
 
 # Directory keyboard dependent files exist
-TARGET_DIR = .
+TARGET_DIR ?= .
 
 # project specific files
-SRC =  keymap_common.c \
-       matrix.c \
-       led.c \
+SRC ?= matrix.c \
        adb.c
 
-ifdef KEYMAP
-    SRC := keymap_$(KEYMAP).c $(SRC)
-else
-    SRC := keymap_ansi.c $(SRC)
-endif
-
 CONFIG_H = config.h
 
 
@@ -66,7 +18,7 @@ CONFIG_H = config.h
 # atmega32u4   Teensy2.0
 # atemga32u4   TMK Converter rev.1
 # atemga32u2   TMK Converter rev.2
-MCU = atmega32u2
+MCU ?= atmega32u2
 
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the
@@ -79,14 +31,14 @@ MCU = atmega32u2
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
-F_CPU = 16000000
+F_CPU ?= 16000000
 
 
 #
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
+ARCH ?= AVR8
 
 # Input clock frequency.
 #     This will define a symbol, F_USB, in all source code files equal to the
@@ -99,7 +51,7 @@ ARCH = AVR8
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
+F_USB ?= $(F_CPU)
 
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
@@ -111,28 +63,52 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   Atmel DFU loader 4096      for TMK Converter rev.1/rev.2
 #   LUFA bootloader  4096
 #   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+BOOTLOADER_SIZE ?= 4096
+OPT_DEFS += -DBOOTLOADER_SIZE=$(BOOTLOADER_SIZE)
 
 
 # Build Options
 #   comment out to disable the options.
 #
-#BOOTMAGIC_ENABLE = yes        # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes  # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes  # Audio control and System control(+450)
-CONSOLE_ENABLE = yes   # Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes     # USB Nkey Rollover
-ADB_MOUSE_ENABLE = yes
+BOOTMAGIC_ENABLE ?= no         # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes         # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes         # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes          # Console for debug(+400)
+COMMAND_ENABLE ?= yes          # Commands for debug and configuration
+NKRO_ENABLE ?= no              # USB Nkey Rollover
+ADB_MOUSE_ENABLE ?= yes                # ADB Mouse support
+UNIMAP_ENABLE ?= yes           # Use unimap
+ACTIONMAP_ENABLE ?= no          # Use 16bit actionmap instead of 8bit keymap
+KEYMAP_SECTION_ENABLE ?= yes   # fixed address keymap for keymap editor
 
 # ADB Mice need acceleration for todays much bigger screens. 
-OPT_DEFS += -DADB_MOUSE_MAXACC=8
+ADB_MOUSE_MAXACC ?= 8
+OPT_DEFS += -DADB_MOUSE_MAXACC=$(ADB_MOUSE_MAXACC)
 
 
 # Optimize size but this may cause error "relocation truncated to fit"
 #EXTRALDFLAGS = -Wl,--relax
 
+
+#
+# Keymap file
+#
+ifeq (yes,$(strip $(UNIMAP_ENABLE)))
+    KEYMAP_FILE = unimap
+else
+    ifeq (yes,$(strip $(ACTIONMAP_ENABLE)))
+       KEYMAP_FILE = actionmap
+    else
+       KEYMAP_FILE = keymap
+    endif
+endif
+ifdef KEYMAP
+    SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC)
+else
+    SRC := $(KEYMAP_FILE)_plain.c $(SRC)
+endif
+
+
 # Search Path
 VPATH += $(TARGET_DIR)
 VPATH += $(TMK_DIR)