ibmpc_usb: Fix keyboard initialize

[max/tmk_keyboard.git] / converter / adb_usb / Makefile

diff --git a/converter/adb_usb/Makefile b/converter/adb_usb/Makefile
index b2bda94466f26173a4874a6559d4f6c5d4aede3e..fe94d9f7b8463cad9b5e9b762d3a2744d6ddc1e5 100644 (file)
--- a/converter/adb_usb/Makefile
+++ b/converter/adb_usb/Makefile
@@ -1,15 +1,14 @@
 # Target file name (without extension).
-TARGET = adb_usb_lufa
+TARGET ?= adb_usb
 
 # Directory common source filess exist
-TMK_DIR = ../../tmk_core
+TMK_DIR ?= ../../tmk_core
 
 # Directory keyboard dependent files exist
-TARGET_DIR = .
+TARGET_DIR ?= .
 
 # project specific files
-SRC =  matrix.c \
-       led.c \
+SRC ?= matrix.c \
        adb.c
 
 CONFIG_H = config.h
@@ -19,7 +18,7 @@ CONFIG_H = config.h
 # atmega32u4   Teensy2.0
 # atemga32u4   TMK Converter rev.1
 # atemga32u2   TMK Converter rev.2
-MCU = atmega32u2
+MCU ?= atmega32u2
 
 # Processor frequency.
 #     This will define a symbol, F_CPU, in all source code files equal to the
@@ -32,14 +31,14 @@ MCU = atmega32u2
 #     does not *change* the processor frequency - it should merely be updated to
 #     reflect the processor speed set externally so that the code can use accurate
 #     software delays.
-F_CPU = 16000000
+F_CPU ?= 16000000
 
 
 #
 # LUFA specific
 #
 # Target architecture (see library "Board Types" documentation).
-ARCH = AVR8
+ARCH ?= AVR8
 
 # Input clock frequency.
 #     This will define a symbol, F_USB, in all source code files equal to the
@@ -52,7 +51,7 @@ ARCH = AVR8
 #
 #     If no clock division is performed on the input clock inside the AVR (via the
 #     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
-F_USB = $(F_CPU)
+F_USB ?= $(F_CPU)
 
 # Interrupt driven control endpoint task(+60)
 OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
@@ -64,26 +63,27 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 #   Atmel DFU loader 4096      for TMK Converter rev.1/rev.2
 #   LUFA bootloader  4096
 #   USBaspLoader     2048
-OPT_DEFS += -DBOOTLOADER_SIZE=4096
+BOOTLOADER_SIZE ?= 4096
+OPT_DEFS += -DBOOTLOADER_SIZE=$(BOOTLOADER_SIZE)
 
 
 # Build Options
 #   comment out to disable the options.
 #
-#BOOTMAGIC_ENABLE = yes        # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE = yes  # Mouse keys(+4700)
-EXTRAKEY_ENABLE = yes  # Audio control and System control(+450)
-CONSOLE_ENABLE = yes   # Console for debug(+400)
-COMMAND_ENABLE = yes    # Commands for debug and configuration
-#SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes     # USB Nkey Rollover
-ADB_MOUSE_ENABLE = yes
-#UNIMAP_ENABLE = yes
-#ACTIONMAP_ENABLE = yes         # Use 16bit actionmap instead of 8bit keymap
-#KEYMAP_SECTION_ENABLE = yes   # fixed address keymap for keymap editor
+BOOTMAGIC_ENABLE ?= no         # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE ?= yes         # Mouse keys(+4700)
+EXTRAKEY_ENABLE ?= yes         # Audio control and System control(+450)
+CONSOLE_ENABLE ?= yes          # Console for debug(+400)
+COMMAND_ENABLE ?= yes          # Commands for debug and configuration
+NKRO_ENABLE ?= no              # USB Nkey Rollover
+ADB_MOUSE_ENABLE ?= yes                # ADB Mouse support
+UNIMAP_ENABLE ?= yes           # Use unimap
+ACTIONMAP_ENABLE ?= no          # Use 16bit actionmap instead of 8bit keymap
+KEYMAP_SECTION_ENABLE ?= yes   # fixed address keymap for keymap editor
 
 # ADB Mice need acceleration for todays much bigger screens. 
-OPT_DEFS += -DADB_MOUSE_MAXACC=8
+ADB_MOUSE_MAXACC ?= 8
+OPT_DEFS += -DADB_MOUSE_MAXACC=$(ADB_MOUSE_MAXACC)
 
 
 # Optimize size but this may cause error "relocation truncated to fit"
@@ -93,10 +93,10 @@ OPT_DEFS += -DADB_MOUSE_MAXACC=8
 #
 # Keymap file
 #
-ifdef UNIMAP_ENABLE
+ifeq (yes,$(strip $(UNIMAP_ENABLE)))
     KEYMAP_FILE = unimap
 else
-    ifdef ACTIONMAP_ENABLE
+    ifeq (yes,$(strip $(ACTIONMAP_ENABLE)))
        KEYMAP_FILE = actionmap
     else
        KEYMAP_FILE = keymap