#include <avr/power.h>
#include <util/delay.h>
-// USB HID host
-#include "Usb.h"
-#include "hid.h"
-#include "hidboot.h"
-#include "parser.h"
-#include "usbhub.h"
-
// LUFA
#include "lufa.h"
-#include "timer.h"
#include "sendchar.h"
#include "debug.h"
#include "keyboard.h"
+#include "led.h"
+
+
+/* LED ping configuration */
+#define TMK_LED
+//#define LEONARDO_LED
+#if defined(TMK_LED)
+// For TMK converter and Teensy
+#define LED_TX_INIT (DDRD |= (1<<6))
+#define LED_TX_ON (PORTD |= (1<<6))
+#define LED_TX_OFF (PORTD &= ~(1<<6))
+#define LED_TX_TOGGLE (PORTD ^= (1<<6))
+#elif defined(LEONARDO_LED)
+// For Leonardo(TX LED)
+#define LED_TX_INIT (DDRD |= (1<<5))
+#define LED_TX_ON (PORTD &= ~(1<<5))
+#define LED_TX_OFF (PORTD |= (1<<5))
+#define LED_TX_TOGGLE (PORTD ^= (1<<5))
+#else
+#define LED_TX_INIT
+#define LED_TX_ON
+#define LED_TX_OFF
+#define LED_TX_TOGGLE
+#endif
-#include "leonardo_led.h"
-
-
-static USB usb_host;
-static HIDBoot<HID_PROTOCOL_KEYBOARD> kbd(&usb_host);
-static KBDReportParser kbd_parser;
-static USBHub hub1(&usb_host); // one hub is enough for HHKB pro2
-/* may be needed for other device with more hub
-static USBHub hub2(&usb_host);
-static USBHub hub3(&usb_host);
-static USBHub hub4(&usb_host);
-static USBHub hub5(&usb_host);
-static USBHub hub6(&usb_host);
-static USBHub hub7(&usb_host);
-*/
static void LUFA_setup(void)
{
wdt_disable();
/* Disable clock division */
+#if (F_CPU == 8000000)
+ clock_prescale_set(clock_div_2); // 16MHz crystal divided by 2
+#else
clock_prescale_set(clock_div_1);
+#endif
// Leonardo needs. Without this USB device is not recognized.
USB_Disable();
print_set_sendchar(sendchar);
}
-static void HID_setup()
-{
- if (usb_host.Init() == -1) {
- debug("HID init: failed\n");
- LED_TX_OFF;
- }
-
- _delay_ms(200);
-
- kbd.SetReportParser(0, (HIDReportParser*)&kbd_parser);
-}
+
int main(void)
{
LED_TX_ON;
debug_enable = true;
-/*
- debug_matrix = true;
debug_keyboard = true;
- debug_mouse = true;
-*/
host_set_driver(&lufa_driver);
keyboard_init();
LUFA_setup();
+
+ /* NOTE: Don't insert time consuming job here.
+ * It'll cause unclear initialization failure when DFU reset(worm start).
+ */
sei();
-uint8_t ret;
+/* Some keyboards bootup quickly and cannot be initialized with this startup wait.
// wait for startup of sendchar routine
while (USB_DeviceState != DEVICE_STATE_Configured) ;
if (debug_enable) {
_delay_ms(1000);
}
+*/
- debug("init: start\n");
- HID_setup();
-
debug("init: done\n");
-uint16_t timer;
-// to see loop pulse with oscillo scope
-DDRF = (1<<7);
for (;;) {
-PORTF ^= (1<<7);
keyboard_task();
-timer = timer_read();
- usb_host.Task();
-timer = timer_elapsed(timer);
-if (timer > 100) {
- debug("host.Task: "); debug_hex16(timer); debug("\n");
-}
-
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
// LUFA Task for control request
USB_USBTask();
#endif
}
-
+
return 0;
}