Fix Makefile for NKRO comment

[max/tmk_keyboard.git] / converter / x68k_usb / Makefile

diff --git a/converter/x68k_usb/Makefile b/converter/x68k_usb/Makefile
index fd66ed563b1fc8441bf19220d72e2c4e33cdd9b6..19901beef743b8b1d27546ccc0692c6a5127634e 100644 (file)
--- a/converter/x68k_usb/Makefile
+++ b/converter/x68k_usb/Makefile
@@ -4,10 +4,10 @@
 
 
 # Target file name (without extension).
-TARGET = x68k_usb_pjrc
+TARGET = x68k_usb
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -16,18 +16,18 @@ TARGET_DIR = .
 SRC =  keymap.c \
        matrix.c \
        led.c \
-       protocol/x68k.c
-#      protocol/serial_uart.c
+       protocol/serial_uart.c
 
-CONFIG_H = config_pjrc.h
+CONFIG_H = config.h
 
 
 # MCU name, you MUST set this to match the board you are using
 # type "make clean" after changing this, so all files will be rebuilt
 #MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
+#MCU = atmega32u4       # Teensy 2.0
 #MCU = at90usb646       # Teensy++ 1.0
 #MCU = at90usb1286      # Teensy++ 2.0
+MCU = atmega32u2       # Teensy 2.0
 
 
 # Processor frequency.
@@ -38,6 +38,29 @@ MCU = atmega32u4       # Teensy 2.0
 F_CPU = 16000000
 
 
+#
+# LUFA specific
+#
+# Target architecture (see library "Board Types" documentation).
+ARCH = AVR8
+
+# Input clock frequency.
+#     This will define a symbol, F_USB, in all source code files equal to the
+#     input clock frequency (before any prescaling is performed) in Hz. This value may
+#     differ from F_CPU if prescaling is used on the latter, and is required as the
+#     raw input clock is fed directly to the PLL sections of the AVR for high speed
+#     clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
+#     at the end, this will be done automatically to create a 32-bit value in your
+#     source code.
+#
+#     If no clock division is performed on the input clock inside the AVR (via the
+#     CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
+F_USB = $(F_CPU)
+
+# Interrupt driven control endpoint task(+60)
+#OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
+
+
 # Boot Section Size in bytes
 #   Teensy halfKay   512
 #   Atmel DFU loader 4096
@@ -54,7 +77,7 @@ EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
 CONSOLE_ENABLE = yes   # Console for debug(+400)
 COMMAND_ENABLE = yes    # Commands for debug and configuration
 #SLEEP_LED_ENABLE = yes  # Breathing sleep LED during USB suspend
-#NKRO_ENABLE = yes     # USB Nkey Rollover - not yet supported in LUFA
+#NKRO_ENABLE = yes     # USB Nkey Rollover
 
 
 
@@ -86,17 +109,15 @@ AVRDUDE_FLAGS += $(AVRDUDE_NO_VERIFY)
 AVRDUDE_FLAGS += $(AVRDUDE_VERBOSE)
 AVRDUDE_FLAGS += $(AVRDUDE_ERASE_COUNTER)
 
-#PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
-#PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex
-PROGRAM_CMD = dfu-programmer atmega32u4 flash $(TARGET).hex
+PROGRAM_CMD = $(AVRDUDE) $(AVRDUDE_FLAGS) $(AVRDUDE_WRITE_FLASH) $(AVRDUDE_WRITE_EEPROM)
 
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
 
-include $(TOP_DIR)/protocol/pjrc.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk