-/*
+/*
* Copyright 2012 Jun Wako <wakojun@gmail.com>
* This file is based on:
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
#include "sleep_led.h"
#endif
#include "suspend.h"
+#include "hook.h"
+
+#ifdef LUFA_DEBUG_SUART
+#include "avr/suart.h"
+#endif
+#include "matrix.h"
#include "descriptor.h"
#include "lufa.h"
+
+//#define LUFA_DEBUG
+
+
uint8_t keyboard_idle = 0;
+/* 0: Boot Protocol, 1: Report Protocol(default) */
uint8_t keyboard_protocol = 1;
static uint8_t keyboard_led_stats = 0;
{
/* Create a temporary buffer to hold the read in report from the host */
uint8_t ConsoleData[CONSOLE_EPSIZE];
-
+
/* Read Console Report Data */
Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL);
-
+
/* Process Console Report Data */
//ProcessConsoleHIDReport(ConsoleData);
}
print("[D]");
/* For battery powered device */
USB_IsInitialized = false;
-/* TODO: This doesn't work. After several plug in/outs can not be enumerated.
+/* TODO: This doesn't work. After several plug in/outs can not be enumerated.
if (USB_IsInitialized) {
USB_Disable(); // Disable all interrupts
USB_Controller_Enable();
void EVENT_USB_Device_Reset(void)
{
+#ifdef LUFA_DEBUG
print("[R]");
+#endif
}
void EVENT_USB_Device_Suspend()
{
+#ifdef LUFA_DEBUG
print("[S]");
-#ifdef SLEEP_LED_ENABLE
- sleep_led_enable();
#endif
+ hook_usb_suspend_entry();
}
void EVENT_USB_Device_WakeUp()
{
+#ifdef LUFA_DEBUG
print("[W]");
- suspend_wakeup_init();
-
-#ifdef SLEEP_LED_ENABLE
- sleep_led_disable();
- // NOTE: converters may not accept this
- led_set(host_keyboard_leds());
#endif
+ hook_usb_wakeup();
}
#ifdef CONSOLE_ENABLE
*/
void EVENT_USB_Device_ConfigurationChanged(void)
{
+#ifdef LUFA_DEBUG
+ print("[c]");
+#endif
bool ConfigSuccess = true;
/* Setup Keyboard HID Report Endpoints */
/* Write the report data to the control endpoint */
Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
Endpoint_ClearOUT();
+#ifdef LUFA_DEBUG
+ xprintf("[r%d]", USB_ControlRequest.wIndex);
+#endif
}
break;
Endpoint_ClearOUT();
Endpoint_ClearStatusStage();
+#ifdef LUFA_DEBUG
+ xprintf("[L%d]", USB_ControlRequest.wIndex);
+#endif
break;
}
Endpoint_Write_8(keyboard_protocol);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
+#ifdef LUFA_DEBUG
+ print("[p]");
+#endif
}
}
Endpoint_ClearSETUP();
Endpoint_ClearStatusStage();
- keyboard_protocol = ((USB_ControlRequest.wValue & 0xFF) != 0x00);
-#ifdef NKRO_ENABLE
- keyboard_nkro = !!keyboard_protocol;
-#endif
+ keyboard_protocol = (USB_ControlRequest.wValue & 0xFF);
clear_keyboard();
+#ifdef LUFA_DEBUG
+ print("[P]");
+#endif
}
}
Endpoint_ClearStatusStage();
keyboard_idle = ((USB_ControlRequest.wValue & 0xFF00) >> 8);
+#ifdef LUFA_DEBUG
+ xprintf("[I%d]%d", USB_ControlRequest.wIndex, (USB_ControlRequest.wValue & 0xFF00) >> 8);
+#endif
}
break;
Endpoint_Write_8(keyboard_idle);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
+#ifdef LUFA_DEBUG
+ print("[i]");
+#endif
}
break;
}
/*******************************************************************************
- * Host driver
+ * Host driver
******************************************************************************/
static uint8_t keyboard_leds(void)
{
/* Select the Keyboard Report Endpoint */
#ifdef NKRO_ENABLE
- if (keyboard_nkro) {
+ if (keyboard_protocol && keyboard_nkro) {
/* Report protocol - NKRO */
Endpoint_SelectEndpoint(NKRO_IN_EPNUM);
/* Check if write ready for a polling interval around 1ms */
- while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(4);
+ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(8);
if (!Endpoint_IsReadWriteAllowed()) return;
/* Write Keyboard Report Data */
static void send_system(uint16_t data)
{
+#ifdef EXTRAKEY_ENABLE
uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
Endpoint_ClearIN();
+#endif
}
static void send_consumer(uint16_t data)
{
+#ifdef EXTRAKEY_ENABLE
uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
Endpoint_ClearIN();
+#endif
}
#define SEND_TIMEOUT 5
int8_t sendchar(uint8_t c)
{
+#ifdef LUFA_DEBUG_SUART
+ xmit(c);
+#endif
// Not wait once timeouted.
// Because sendchar() is called so many times, waiting each call causes big lag.
static bool timeouted = false;
#else
int8_t sendchar(uint8_t c)
{
+#ifdef LUFA_DEBUG_SUART
+ xmit(c);
+#endif
return 0;
}
#endif
// for Console_Task
USB_Device_EnableSOFEvents();
- print_set_sendchar(sendchar);
}
int main(void) __attribute__ ((weak));
int main(void)
{
setup_mcu();
+
+#ifdef LUFA_DEBUG_SUART
+ SUART_OUT_DDR |= (1<<SUART_OUT_BIT);
+ SUART_OUT_PORT |= (1<<SUART_OUT_BIT);
+#endif
+ print_set_sendchar(sendchar);
+ print("\r\ninit\n");
+
+ hook_early_init();
keyboard_setup();
setup_usb();
sei();
USB_USBTask();
#endif
}
+
+ /* wait for Console startup */
+ // TODO: long delay often works anyhoo but proper startup would be better
+ uint16_t delay = 2000;
+ while (delay--) {
+#ifndef INTERRUPT_CONTROL_ENDPOINT
+ USB_USBTask();
+#endif
+ _delay_ms(1);
+ }
+
print("USB configured.\n");
/* init modules */
#endif
print("Keyboard start.\n");
+ hook_late_init();
while (1) {
while (USB_DeviceState == DEVICE_STATE_Suspended) {
+#ifdef LUFA_DEBUG
print("[s]");
- suspend_power_down();
- if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
- USB_Device_SendRemoteWakeup();
- }
+#endif
+ hook_usb_suspend_loop();
}
keyboard_task();
#endif
}
}
+
+
+/* hooks */
+__attribute__((weak))
+void hook_early_init(void) {}
+
+__attribute__((weak))
+void hook_late_init(void) {}
+
+static uint8_t _led_stats = 0;
+ __attribute__((weak))
+void hook_usb_suspend_entry(void)
+{
+ // Turn LED off to save power
+ // Set 0 with putting aside status before suspend and restore
+ // it after wakeup, then LED is updated at keyboard_task() in main loop
+ _led_stats = keyboard_led_stats;
+ keyboard_led_stats = 0;
+ led_set(keyboard_led_stats);
+
+ matrix_clear();
+ clear_keyboard();
+#ifdef SLEEP_LED_ENABLE
+ sleep_led_enable();
+#endif
+}
+
+__attribute__((weak))
+void hook_usb_suspend_loop(void)
+{
+ suspend_power_down();
+ if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
+ USB_Device_SendRemoteWakeup();
+ }
+}
+
+__attribute__((weak))
+void hook_usb_wakeup(void)
+{
+ suspend_wakeup_init();
+#ifdef SLEEP_LED_ENABLE
+ sleep_led_disable();
+#endif
+
+ // Restore LED status
+ // BIOS/grub won't recognize/enumerate if led_set() takes long(around 40ms?)
+ // Converters fall into the case and miss wakeup event(timeout to reply?) in the end.
+ //led_set(host_keyboard_leds());
+ // Instead, restore stats and update at keyboard_task() in main loop
+ keyboard_led_stats = _led_stats;
+}
projects / max / tmk_keyboard.git / blobdiff