-/*
+/*
* Copyright 2012 Jun Wako <wakojun@gmail.com>
* This file is based on:
* LUFA-120219/Demos/Device/Lowlevel/KeyboardMouse
#include "action.h"
#include "led.h"
#include "sendchar.h"
+#include "ringbuf.h"
#include "debug.h"
#ifdef SLEEP_LED_ENABLE
#include "sleep_led.h"
#endif
#include "suspend.h"
#include "hook.h"
+#include "timer.h"
+
+#ifdef LUFA_DEBUG_SUART
+#include "avr/suart.h"
+#endif
+#include "matrix.h"
#include "descriptor.h"
#include "lufa.h"
+
+//#define LUFA_DEBUG
+
+
uint8_t keyboard_idle = 0;
/* 0: Boot Protocol, 1: Report Protocol(default) */
uint8_t keyboard_protocol = 1;
* Console
******************************************************************************/
#ifdef CONSOLE_ENABLE
-static void Console_Task(void)
+#define SENDBUF_SIZE 256
+static uint8_t sbuf[SENDBUF_SIZE];
+static ringbuf_t sendbuf = {
+ .buffer = sbuf,
+ .head = 0,
+ .tail = 0,
+ .size_mask = SENDBUF_SIZE - 1
+};
+
+// TODO: Around 2500ms delay often works anyhoo but proper startup would be better
+// 1000ms delay of hid_listen affects this probably
+/* wait for Console startup */
+static bool console_is_ready(void)
{
- /* Device must be connected and configured for the task to run */
+ static bool hid_listen_ready = false;
+ if (!hid_listen_ready) {
+ if (timer_read32() < 2500)
+ return false;
+ hid_listen_ready = true;
+ }
+ return true;
+}
+
+static bool console_putc(uint8_t c)
+{
+ if (!console_is_ready())
+ goto EXIT;
+
+ // return immediately if called while interrupt
+ if (!(SREG & (1<<SREG_I)))
+ goto EXIT;
+
if (USB_DeviceState != DEVICE_STATE_Configured)
- return;
+ goto EXIT;
uint8_t ep = Endpoint_GetCurrentEndpoint();
-#if 0
- // TODO: impl receivechar()/recvchar()
- Endpoint_SelectEndpoint(CONSOLE_OUT_EPNUM);
+ Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
+ if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
+ goto EXIT_RESTORE_EP;
+ }
- /* Check to see if a packet has been sent from the host */
- if (Endpoint_IsOUTReceived())
- {
- /* Check to see if the packet contains data */
- if (Endpoint_IsReadWriteAllowed())
- {
- /* Create a temporary buffer to hold the read in report from the host */
- uint8_t ConsoleData[CONSOLE_EPSIZE];
-
- /* Read Console Report Data */
- Endpoint_Read_Stream_LE(&ConsoleData, sizeof(ConsoleData), NULL);
-
- /* Process Console Report Data */
- //ProcessConsoleHIDReport(ConsoleData);
+ // write from buffer to endpoint bank
+ while (!ringbuf_is_empty(&sendbuf) && Endpoint_IsReadWriteAllowed()) {
+ Endpoint_Write_8(ringbuf_get(&sendbuf));
+
+ // clear bank when it is full
+ if (!Endpoint_IsReadWriteAllowed() && Endpoint_IsINReady()) {
+ Endpoint_ClearIN();
}
+ }
- /* Finalize the stream transfer to send the last packet */
- Endpoint_ClearOUT();
+ // write c to bank directly if there is no others in buffer
+ if (ringbuf_is_empty(&sendbuf) && Endpoint_IsReadWriteAllowed()) {
+ Endpoint_Write_8(c);
+ Endpoint_SelectEndpoint(ep);
+ return true;
}
-#endif
- /* IN packet */
+EXIT_RESTORE_EP:
+ Endpoint_SelectEndpoint(ep);
+EXIT:
+ return ringbuf_put(&sendbuf, c);
+}
+
+static void console_flush(void)
+{
+ if (!console_is_ready())
+ return;
+
+ if (USB_DeviceState != DEVICE_STATE_Configured)
+ return;
+
+ uint8_t ep = Endpoint_GetCurrentEndpoint();
+
Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
Endpoint_SelectEndpoint(ep);
return;
}
- // fill empty bank
- while (Endpoint_IsReadWriteAllowed())
- Endpoint_Write_8(0);
+ // write from buffer to endpoint bank
+ while (!ringbuf_is_empty(&sendbuf) && Endpoint_IsReadWriteAllowed()) {
+ Endpoint_Write_8(ringbuf_get(&sendbuf));
+
+ // clear bank when it is full
+ if (!Endpoint_IsReadWriteAllowed() && Endpoint_IsINReady()) {
+ Endpoint_ClearIN();
+ }
+ }
- // flash senchar packet
- if (Endpoint_IsINReady()) {
+ // clear bank when there are chars in bank
+ if (Endpoint_BytesInEndpoint() && Endpoint_IsINReady()) {
+ // Windows needs to fill packet with 0
+ while (Endpoint_IsReadWriteAllowed()) {
+ Endpoint_Write_8(0);
+ }
Endpoint_ClearIN();
}
Endpoint_SelectEndpoint(ep);
}
-#else
-static void Console_Task(void)
+
+static void console_task(void)
{
+ static uint16_t fn = 0;
+ if (fn == USB_Device_GetFrameNumber()) {
+ return;
+ }
+ fn = USB_Device_GetFrameNumber();
+ console_flush();
}
#endif
print("[D]");
/* For battery powered device */
USB_IsInitialized = false;
-/* TODO: This doesn't work. After several plug in/outs can not be enumerated.
+/* TODO: This doesn't work. After several plug in/outs can not be enumerated.
if (USB_IsInitialized) {
USB_Disable(); // Disable all interrupts
USB_Controller_Enable();
void EVENT_USB_Device_Reset(void)
{
+#ifdef LUFA_DEBUG
print("[R]");
+#endif
}
void EVENT_USB_Device_Suspend()
{
+#ifdef LUFA_DEBUG
print("[S]");
+#endif
hook_usb_suspend_entry();
}
void EVENT_USB_Device_WakeUp()
{
+#ifdef LUFA_DEBUG
print("[W]");
+#endif
hook_usb_wakeup();
}
-#ifdef CONSOLE_ENABLE
-static bool console_flush = false;
-#define CONSOLE_FLUSH_SET(b) do { \
- uint8_t sreg = SREG; cli(); console_flush = b; SREG = sreg; \
-} while (0)
-
// called every 1ms
void EVENT_USB_Device_StartOfFrame(void)
{
- static uint8_t count;
- if (++count % 50) return;
- count = 0;
-
- if (!console_flush) return;
- Console_Task();
- console_flush = false;
}
-#endif
/** Event handler for the USB_ConfigurationChanged event.
* This is fired when the host sets the current configuration of the USB device after enumeration.
*/
void EVENT_USB_Device_ConfigurationChanged(void)
{
+#ifdef LUFA_DEBUG
+ print("[c]");
+#endif
bool ConfigSuccess = true;
/* Setup Keyboard HID Report Endpoints */
/* Write the report data to the control endpoint */
Endpoint_Write_Control_Stream_LE(ReportData, ReportSize);
Endpoint_ClearOUT();
+#ifdef LUFA_DEBUG
+ xprintf("[r%d]", USB_ControlRequest.wIndex);
+#endif
}
break;
Endpoint_ClearOUT();
Endpoint_ClearStatusStage();
+#ifdef LUFA_DEBUG
+ xprintf("[L%d]", USB_ControlRequest.wIndex);
+#endif
break;
}
Endpoint_Write_8(keyboard_protocol);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
+#ifdef LUFA_DEBUG
+ print("[p]");
+#endif
}
}
keyboard_protocol = (USB_ControlRequest.wValue & 0xFF);
clear_keyboard();
+#ifdef LUFA_DEBUG
+ print("[P]");
+#endif
}
}
Endpoint_ClearStatusStage();
keyboard_idle = ((USB_ControlRequest.wValue & 0xFF00) >> 8);
+#ifdef LUFA_DEBUG
+ xprintf("[I%d]%d", USB_ControlRequest.wIndex, (USB_ControlRequest.wValue & 0xFF00) >> 8);
+#endif
}
break;
Endpoint_Write_8(keyboard_idle);
Endpoint_ClearIN();
Endpoint_ClearStatusStage();
+#ifdef LUFA_DEBUG
+ print("[i]");
+#endif
}
break;
}
/*******************************************************************************
- * Host driver
+ * Host driver
******************************************************************************/
static uint8_t keyboard_leds(void)
{
static void send_keyboard(report_keyboard_t *report)
{
- uint8_t timeout = 255;
+ uint8_t timeout = 128;
if (USB_DeviceState != DEVICE_STATE_Configured)
return;
Endpoint_SelectEndpoint(NKRO_IN_EPNUM);
/* Check if write ready for a polling interval around 1ms */
- while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(4);
+ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(8);
if (!Endpoint_IsReadWriteAllowed()) return;
/* Write Keyboard Report Data */
Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
/* Check if write ready for a polling interval around 10ms */
- while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
+ while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(80);
if (!Endpoint_IsReadWriteAllowed()) return;
/* Write Keyboard Report Data */
static void send_system(uint16_t data)
{
+#ifdef EXTRAKEY_ENABLE
uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
Endpoint_ClearIN();
+#endif
}
static void send_consumer(uint16_t data)
{
+#ifdef EXTRAKEY_ENABLE
uint8_t timeout = 255;
if (USB_DeviceState != DEVICE_STATE_Configured)
Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
Endpoint_ClearIN();
+#endif
}
* sendchar
******************************************************************************/
#ifdef CONSOLE_ENABLE
-#define SEND_TIMEOUT 5
int8_t sendchar(uint8_t c)
{
- // Not wait once timeouted.
- // Because sendchar() is called so many times, waiting each call causes big lag.
- static bool timeouted = false;
+ #ifdef LUFA_DEBUG_SUART
+ xmit(c);
+ #endif
- // prevents Console_Task() from running during sendchar() runs.
- // or char will be lost. These two function is mutually exclusive.
- CONSOLE_FLUSH_SET(false);
-
- if (USB_DeviceState != DEVICE_STATE_Configured)
- return -1;
-
- uint8_t ep = Endpoint_GetCurrentEndpoint();
- Endpoint_SelectEndpoint(CONSOLE_IN_EPNUM);
- if (!Endpoint_IsEnabled() || !Endpoint_IsConfigured()) {
- goto ERROR_EXIT;
- }
-
- if (timeouted && !Endpoint_IsReadWriteAllowed()) {
- goto ERROR_EXIT;
- }
-
- timeouted = false;
-
- uint8_t timeout = SEND_TIMEOUT;
- while (!Endpoint_IsReadWriteAllowed()) {
- if (USB_DeviceState != DEVICE_STATE_Configured) {
- goto ERROR_EXIT;
- }
- if (Endpoint_IsStalled()) {
- goto ERROR_EXIT;
- }
- if (!(timeout--)) {
- timeouted = true;
- goto ERROR_EXIT;
- }
- _delay_ms(1);
- }
-
- Endpoint_Write_8(c);
-
- // send when bank is full
- if (!Endpoint_IsReadWriteAllowed()) {
- while (!(Endpoint_IsINReady()));
- Endpoint_ClearIN();
- } else {
- CONSOLE_FLUSH_SET(true);
- }
-
- Endpoint_SelectEndpoint(ep);
- return 0;
-ERROR_EXIT:
- Endpoint_SelectEndpoint(ep);
- return -1;
+ bool r = console_putc(c);
+ return (r ? 0 : -1);
}
#else
int8_t sendchar(uint8_t c)
{
+ #ifdef LUFA_DEBUG_SUART
+ xmit(c);
+ #endif
return 0;
}
#endif
USB_Init();
- // for Console_Task
USB_Device_EnableSOFEvents();
- print_set_sendchar(sendchar);
}
int main(void) __attribute__ ((weak));
int main(void)
{
setup_mcu();
+
+#ifdef LUFA_DEBUG_SUART
+ SUART_OUT_DDR |= (1<<SUART_OUT_BIT);
+ SUART_OUT_PORT |= (1<<SUART_OUT_BIT);
+#endif
+
+ // setup sendchar: DO NOT USE print functions before this line
+ print_set_sendchar(sendchar);
+ host_set_driver(&lufa_driver);
+
+ print("Keyboard init.\n");
hook_early_init();
keyboard_setup();
setup_usb();
+#ifdef SLEEP_LED_ENABLE
+ sleep_led_init();
+#endif
+
sei();
- /* wait for USB startup & debug output */
+ /* wait for USB startup */
while (USB_DeviceState != DEVICE_STATE_Configured) {
#if defined(INTERRUPT_CONTROL_ENDPOINT)
;
USB_USBTask();
#endif
}
- print("USB configured.\n");
- /* init modules */
keyboard_init();
- host_set_driver(&lufa_driver);
-#ifdef SLEEP_LED_ENABLE
- sleep_led_init();
-#endif
- print("Keyboard start.\n");
hook_late_init();
+
+ print("\nKeyboard start.\n");
while (1) {
while (USB_DeviceState == DEVICE_STATE_Suspended) {
+#ifdef LUFA_DEBUG
print("[s]");
+#endif
hook_usb_suspend_loop();
}
keyboard_task();
+#ifdef CONSOLE_ENABLE
+ console_task();
+#endif
+
#if !defined(INTERRUPT_CONTROL_ENDPOINT)
USB_USBTask();
#endif
__attribute__((weak))
void hook_late_init(void) {}
+static uint8_t _led_stats = 0;
__attribute__((weak))
void hook_usb_suspend_entry(void)
{
+ // Turn LED off to save power
+ // Set 0 with putting aside status before suspend and restore
+ // it after wakeup, then LED is updated at keyboard_task() in main loop
+ _led_stats = keyboard_led_stats;
+ keyboard_led_stats = 0;
+ led_set(keyboard_led_stats);
+
+ matrix_clear();
+ clear_keyboard();
#ifdef SLEEP_LED_ENABLE
sleep_led_enable();
#endif
{
suspend_power_down();
if (USB_Device_RemoteWakeupEnabled && suspend_wakeup_condition()) {
- USB_Device_SendRemoteWakeup();
+ USB_Device_SendRemoteWakeup();
}
}
suspend_wakeup_init();
#ifdef SLEEP_LED_ENABLE
sleep_led_disable();
- // NOTE: converters may not accept this
- led_set(host_keyboard_leds());
#endif
+
+ // Restore LED status
+ // BIOS/grub won't recognize/enumerate if led_set() takes long(around 40ms?)
+ // Converters fall into the case and miss wakeup event(timeout to reply?) in the end.
+ //led_set(host_keyboard_leds());
+ // Instead, restore stats and update at keyboard_task() in main loop
+ keyboard_led_stats = _led_stats;
}
projects / max / tmk_keyboard.git / blobdiff