--- /dev/null
+/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
+
+This software may be distributed and modified under the terms of the GNU
+General Public License version 2 (GPL2) as published by the Free Software
+Foundation and appearing in the file GPL2.TXT included in the packaging of
+this file. Please note that GPL2 Section 2[b] requires that all works based
+on this software must also be made publicly available under the terms of
+the GPL2 ("Copyleft").
+
+Contact information
+-------------------
+
+Circuits At Home, LTD
+Web : http://www.circuitsathome.com
+e-mail : support@circuitsathome.com
+ */
+#if !defined(__CDCFTDI_H__)
+#define __CDCFTDI_H__
+
+#include "Usb.h"
+
+#define bmREQ_FTDI_OUT 0x40
+#define bmREQ_FTDI_IN 0xc0
+
+//#define bmREQ_FTDI_OUT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
+//#define bmREQ_FTDI_IN USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_INTERFACE
+
+#define FTDI_VID 0x0403 // FTDI VID
+#define FTDI_PID 0x6001 // FTDI PID
+
+#define FT232AM 0x0200
+#define FT232BM 0x0400
+#define FT2232 0x0500
+#define FT232R 0x0600
+
+// Commands
+#define FTDI_SIO_RESET 0 /* Reset the port */
+#define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */
+#define FTDI_SIO_SET_FLOW_CTRL 2 /* Set flow control register */
+#define FTDI_SIO_SET_BAUD_RATE 3 /* Set baud rate */
+#define FTDI_SIO_SET_DATA 4 /* Set the data characteristics of the port */
+#define FTDI_SIO_GET_MODEM_STATUS 5 /* Retrieve current value of modem status register */
+#define FTDI_SIO_SET_EVENT_CHAR 6 /* Set the event character */
+#define FTDI_SIO_SET_ERROR_CHAR 7 /* Set the error character */
+
+#define FTDI_SIO_RESET_SIO 0
+#define FTDI_SIO_RESET_PURGE_RX 1
+#define FTDI_SIO_RESET_PURGE_TX 2
+
+#define FTDI_SIO_SET_DATA_PARITY_NONE (0x0 << 8 )
+#define FTDI_SIO_SET_DATA_PARITY_ODD (0x1 << 8 )
+#define FTDI_SIO_SET_DATA_PARITY_EVEN (0x2 << 8 )
+#define FTDI_SIO_SET_DATA_PARITY_MARK (0x3 << 8 )
+#define FTDI_SIO_SET_DATA_PARITY_SPACE (0x4 << 8 )
+#define FTDI_SIO_SET_DATA_STOP_BITS_1 (0x0 << 11)
+#define FTDI_SIO_SET_DATA_STOP_BITS_15 (0x1 << 11)
+#define FTDI_SIO_SET_DATA_STOP_BITS_2 (0x2 << 11)
+#define FTDI_SIO_SET_BREAK (0x1 << 14)
+
+#define FTDI_SIO_SET_DTR_MASK 0x1
+#define FTDI_SIO_SET_DTR_HIGH ( 1 | ( FTDI_SIO_SET_DTR_MASK << 8))
+#define FTDI_SIO_SET_DTR_LOW ( 0 | ( FTDI_SIO_SET_DTR_MASK << 8))
+#define FTDI_SIO_SET_RTS_MASK 0x2
+#define FTDI_SIO_SET_RTS_HIGH ( 2 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
+#define FTDI_SIO_SET_RTS_LOW ( 0 | ( FTDI_SIO_SET_RTS_MASK << 8 ))
+
+#define FTDI_SIO_DISABLE_FLOW_CTRL 0x0
+#define FTDI_SIO_RTS_CTS_HS (0x1 << 8)
+#define FTDI_SIO_DTR_DSR_HS (0x2 << 8)
+#define FTDI_SIO_XON_XOFF_HS (0x4 << 8)
+
+#define FTDI_SIO_CTS_MASK 0x10
+#define FTDI_SIO_DSR_MASK 0x20
+#define FTDI_SIO_RI_MASK 0x40
+#define FTDI_SIO_RLSD_MASK 0x80
+
+class FTDI;
+
+class FTDIAsyncOper {
+public:
+
+ virtual uint8_t OnInit(FTDI *pftdi) {
+ return 0;
+ };
+
+ virtual uint8_t OnRelease(FTDI *pftdi) {
+ return 0;
+ };
+};
+
+
+// Only single port chips are currently supported by the library,
+// so only three endpoints are allocated.
+#define FTDI_MAX_ENDPOINTS 3
+
+class FTDI : public USBDeviceConfig, public UsbConfigXtracter {
+ static const uint8_t epDataInIndex; // DataIn endpoint index
+ static const uint8_t epDataOutIndex; // DataOUT endpoint index
+ static const uint8_t epInterruptInIndex; // InterruptIN endpoint index
+
+ FTDIAsyncOper *pAsync;
+ USB *pUsb;
+ uint8_t bAddress;
+ uint8_t bConfNum; // configuration number
+ uint8_t bNumIface; // number of interfaces in the configuration
+ uint8_t bNumEP; // total number of EP in the configuration
+ uint32_t qNextPollTime; // next poll time
+ bool bPollEnable; // poll enable flag
+ uint16_t wFTDIType; // Type of FTDI chip
+
+ EpInfo epInfo[FTDI_MAX_ENDPOINTS];
+
+ void PrintEndpointDescriptor(const USB_ENDPOINT_DESCRIPTOR* ep_ptr);
+
+public:
+ FTDI(USB *pusb, FTDIAsyncOper *pasync);
+
+ uint8_t SetBaudRate(uint32_t baud);
+ uint8_t SetModemControl(uint16_t control);
+ uint8_t SetFlowControl(uint8_t protocol, uint8_t xon = 0x11, uint8_t xoff = 0x13);
+ uint8_t SetData(uint16_t databm);
+
+ // Methods for recieving and sending data
+ uint8_t RcvData(uint16_t *bytes_rcvd, uint8_t *dataptr);
+ uint8_t SndData(uint16_t nbytes, uint8_t *dataptr);
+
+ // USBDeviceConfig implementation
+ uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed);
+ uint8_t Release();
+ uint8_t Poll();
+
+ virtual uint8_t GetAddress() {
+ return bAddress;
+ };
+
+ // UsbConfigXtracter implementation
+ void EndpointXtract(uint8_t conf, uint8_t iface, uint8_t alt, uint8_t proto, const USB_ENDPOINT_DESCRIPTOR *ep);
+
+ virtual bool VIDPIDOK(uint16_t vid, uint16_t pid) {
+ return (vid == FTDI_VID && pid == FTDI_PID);
+ }
+
+};
+
+#endif // __CDCFTDI_H__
projects / max / tmk_keyboard.git / blobdiff