--- /dev/null
+/* -*- mode: jde; c-basic-offset: 2; indent-tabs-mode: nil -*- */
+
+/*
+ Part of the Wiring project - http://wiring.uniandes.edu.co
+
+ Copyright (c) 2004-05 Hernando Barragan
+
+ This library is free software; you can redistribute it and/or
+ modify it under the terms of the GNU Lesser General Public
+ License as published by the Free Software Foundation; either
+ version 2.1 of the License, or (at your option) any later version.
+
+ This library is distributed in the hope that it will be useful,
+ but WITHOUT ANY WARRANTY; without even the implied warranty of
+ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ Lesser General Public License for more details.
+
+ You should have received a copy of the GNU Lesser General
+ Public License along with this library; if not, write to the
+ Free Software Foundation, Inc., 59 Temple Place, Suite 330,
+ Boston, MA 02111-1307 USA
+
+ Modified 24 November 2006 by David A. Mellis
+ Modified 1 August 2010 by Mark Sproul
+*/
+
+#include <inttypes.h>
+#include <avr/io.h>
+#include <avr/interrupt.h>
+#include <avr/pgmspace.h>
+#include <stdio.h>
+
+#include "wiring_private.h"
+
+static void nothing(void) {
+}
+
+static volatile voidFuncPtr intFunc[EXTERNAL_NUM_INTERRUPTS] = {
+#if EXTERNAL_NUM_INTERRUPTS > 8
+ #warning There are more than 8 external interrupts. Some callbacks may not be initialized.
+ nothing,
+#endif
+#if EXTERNAL_NUM_INTERRUPTS > 7
+ nothing,
+#endif
+#if EXTERNAL_NUM_INTERRUPTS > 6
+ nothing,
+#endif
+#if EXTERNAL_NUM_INTERRUPTS > 5
+ nothing,
+#endif
+#if EXTERNAL_NUM_INTERRUPTS > 4
+ nothing,
+#endif
+#if EXTERNAL_NUM_INTERRUPTS > 3
+ nothing,
+#endif
+#if EXTERNAL_NUM_INTERRUPTS > 2
+ nothing,
+#endif
+#if EXTERNAL_NUM_INTERRUPTS > 1
+ nothing,
+#endif
+#if EXTERNAL_NUM_INTERRUPTS > 0
+ nothing,
+#endif
+};
+
+void attachInterrupt(uint8_t interruptNum, void (*userFunc)(void), int mode) {
+ if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
+ intFunc[interruptNum] = userFunc;
+
+ // Configure the interrupt mode (trigger on low input, any change, rising
+ // edge, or falling edge). The mode constants were chosen to correspond
+ // to the configuration bits in the hardware register, so we simply shift
+ // the mode into place.
+
+ // Enable the interrupt.
+
+ switch (interruptNum) {
+#if defined(__AVR_ATmega32U4__)
+ // I hate doing this, but the register assignment differs between the 1280/2560
+ // and the 32U4. Since avrlib defines registers PCMSK1 and PCMSK2 that aren't
+ // even present on the 32U4 this is the only way to distinguish between them.
+ case 0:
+ EICRA = (EICRA & ~((1<<ISC00) | (1<<ISC01))) | (mode << ISC00);
+ EIMSK |= (1<<INT0);
+ break;
+ case 1:
+ EICRA = (EICRA & ~((1<<ISC10) | (1<<ISC11))) | (mode << ISC10);
+ EIMSK |= (1<<INT1);
+ break;
+ case 2:
+ EICRA = (EICRA & ~((1<<ISC20) | (1<<ISC21))) | (mode << ISC20);
+ EIMSK |= (1<<INT2);
+ break;
+ case 3:
+ EICRA = (EICRA & ~((1<<ISC30) | (1<<ISC31))) | (mode << ISC30);
+ EIMSK |= (1<<INT3);
+ break;
+ case 4:
+ EICRB = (EICRB & ~((1<<ISC60) | (1<<ISC61))) | (mode << ISC60);
+ EIMSK |= (1<<INT6);
+ break;
+#elif defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__)
+ case 0:
+ EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ EIMSK |= (1 << INT0);
+ break;
+ case 1:
+ EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ EIMSK |= (1 << INT1);
+ break;
+ case 2:
+ EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+ EIMSK |= (1 << INT2);
+ break;
+ case 3:
+ EICRA = (EICRA & ~((1 << ISC30) | (1 << ISC31))) | (mode << ISC30);
+ EIMSK |= (1 << INT3);
+ break;
+ case 4:
+ EICRB = (EICRB & ~((1 << ISC40) | (1 << ISC41))) | (mode << ISC40);
+ EIMSK |= (1 << INT4);
+ break;
+ case 5:
+ EICRB = (EICRB & ~((1 << ISC50) | (1 << ISC51))) | (mode << ISC50);
+ EIMSK |= (1 << INT5);
+ break;
+ case 6:
+ EICRB = (EICRB & ~((1 << ISC60) | (1 << ISC61))) | (mode << ISC60);
+ EIMSK |= (1 << INT6);
+ break;
+ case 7:
+ EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70);
+ EIMSK |= (1 << INT7);
+ break;
+#elif defined(EICRA) && defined(EICRB) && defined(EIMSK)
+ case 2:
+ EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ EIMSK |= (1 << INT0);
+ break;
+ case 3:
+ EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ EIMSK |= (1 << INT1);
+ break;
+ case 4:
+ EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+ EIMSK |= (1 << INT2);
+ break;
+ case 5:
+ EICRA = (EICRA & ~((1 << ISC30) | (1 << ISC31))) | (mode << ISC30);
+ EIMSK |= (1 << INT3);
+ break;
+ case 0:
+ EICRB = (EICRB & ~((1 << ISC40) | (1 << ISC41))) | (mode << ISC40);
+ EIMSK |= (1 << INT4);
+ break;
+ case 1:
+ EICRB = (EICRB & ~((1 << ISC50) | (1 << ISC51))) | (mode << ISC50);
+ EIMSK |= (1 << INT5);
+ break;
+ case 6:
+ EICRB = (EICRB & ~((1 << ISC60) | (1 << ISC61))) | (mode << ISC60);
+ EIMSK |= (1 << INT6);
+ break;
+ case 7:
+ EICRB = (EICRB & ~((1 << ISC70) | (1 << ISC71))) | (mode << ISC70);
+ EIMSK |= (1 << INT7);
+ break;
+#else
+ case 0:
+ #if defined(EICRA) && defined(ISC00) && defined(EIMSK)
+ EICRA = (EICRA & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ EIMSK |= (1 << INT0);
+ #elif defined(MCUCR) && defined(ISC00) && defined(GICR)
+ MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ GICR |= (1 << INT0);
+ #elif defined(MCUCR) && defined(ISC00) && defined(GIMSK)
+ MCUCR = (MCUCR & ~((1 << ISC00) | (1 << ISC01))) | (mode << ISC00);
+ GIMSK |= (1 << INT0);
+ #else
+ #error attachInterrupt not finished for this CPU (case 0)
+ #endif
+ break;
+
+ case 1:
+ #if defined(EICRA) && defined(ISC10) && defined(ISC11) && defined(EIMSK)
+ EICRA = (EICRA & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ EIMSK |= (1 << INT1);
+ #elif defined(MCUCR) && defined(ISC10) && defined(ISC11) && defined(GICR)
+ MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ GICR |= (1 << INT1);
+ #elif defined(MCUCR) && defined(ISC10) && defined(GIMSK) && defined(GIMSK)
+ MCUCR = (MCUCR & ~((1 << ISC10) | (1 << ISC11))) | (mode << ISC10);
+ GIMSK |= (1 << INT1);
+ #else
+ #warning attachInterrupt may need some more work for this cpu (case 1)
+ #endif
+ break;
+
+ case 2:
+ #if defined(EICRA) && defined(ISC20) && defined(ISC21) && defined(EIMSK)
+ EICRA = (EICRA & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+ EIMSK |= (1 << INT2);
+ #elif defined(MCUCR) && defined(ISC20) && defined(ISC21) && defined(GICR)
+ MCUCR = (MCUCR & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+ GICR |= (1 << INT2);
+ #elif defined(MCUCR) && defined(ISC20) && defined(GIMSK) && defined(GIMSK)
+ MCUCR = (MCUCR & ~((1 << ISC20) | (1 << ISC21))) | (mode << ISC20);
+ GIMSK |= (1 << INT2);
+ #endif
+ break;
+#endif
+ }
+ }
+}
+
+void detachInterrupt(uint8_t interruptNum) {
+ if(interruptNum < EXTERNAL_NUM_INTERRUPTS) {
+ // Disable the interrupt. (We can't assume that interruptNum is equal
+ // to the number of the EIMSK bit to clear, as this isn't true on the
+ // ATmega8. There, INT0 is 6 and INT1 is 7.)
+ switch (interruptNum) {
+#if defined(__AVR_ATmega32U4__)
+ case 0:
+ EIMSK &= ~(1<<INT0);
+ break;
+ case 1:
+ EIMSK &= ~(1<<INT1);
+ break;
+ case 2:
+ EIMSK &= ~(1<<INT2);
+ break;
+ case 3:
+ EIMSK &= ~(1<<INT3);
+ break;
+ case 4:
+ EIMSK &= ~(1<<INT6);
+ break;
+#elif defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__)
+ case 0:
+ EIMSK &= ~(1 << INT0);
+ break;
+ case 1:
+ EIMSK &= ~(1 << INT1);
+ break;
+ case 2:
+ EIMSK &= ~(1 << INT2);
+ break;
+ case 3:
+ EIMSK &= ~(1 << INT3);
+ break;
+ case 4:
+ EIMSK &= ~(1 << INT4);
+ break;
+ case 5:
+ EIMSK &= ~(1 << INT5);
+ break;
+ case 6:
+ EIMSK &= ~(1 << INT6);
+ break;
+ case 7:
+ EIMSK &= ~(1 << INT7);
+ break;
+#elif defined(EICRA) && defined(EICRB) && defined(EIMSK)
+ case 2:
+ EIMSK &= ~(1 << INT0);
+ break;
+ case 3:
+ EIMSK &= ~(1 << INT1);
+ break;
+ case 4:
+ EIMSK &= ~(1 << INT2);
+ break;
+ case 5:
+ EIMSK &= ~(1 << INT3);
+ break;
+ case 0:
+ EIMSK &= ~(1 << INT4);
+ break;
+ case 1:
+ EIMSK &= ~(1 << INT5);
+ break;
+ case 6:
+ EIMSK &= ~(1 << INT6);
+ break;
+ case 7:
+ EIMSK &= ~(1 << INT7);
+ break;
+#else
+ case 0:
+ #if defined(EIMSK) && defined(INT0)
+ EIMSK &= ~(1 << INT0);
+ #elif defined(GICR) && defined(ISC00)
+ GICR &= ~(1 << INT0); // atmega32
+ #elif defined(GIMSK) && defined(INT0)
+ GIMSK &= ~(1 << INT0);
+ #else
+ #error detachInterrupt not finished for this cpu
+ #endif
+ break;
+
+ case 1:
+ #if defined(EIMSK) && defined(INT1)
+ EIMSK &= ~(1 << INT1);
+ #elif defined(GICR) && defined(INT1)
+ GICR &= ~(1 << INT1); // atmega32
+ #elif defined(GIMSK) && defined(INT1)
+ GIMSK &= ~(1 << INT1);
+ #else
+ #warning detachInterrupt may need some more work for this cpu (case 1)
+ #endif
+ break;
+
+ case 2:
+ #if defined(EIMSK) && defined(INT2)
+ EIMSK &= ~(1 << INT2);
+ #elif defined(GICR) && defined(INT2)
+ GICR &= ~(1 << INT2); // atmega32
+ #elif defined(GIMSK) && defined(INT2)
+ GIMSK &= ~(1 << INT2);
+ #elif defined(INT2)
+ #warning detachInterrupt may need some more work for this cpu (case 2)
+ #endif
+ break;
+#endif
+ }
+
+ intFunc[interruptNum] = nothing;
+ }
+}
+
+
+#define IMPLEMENT_ISR(vect, interrupt) \
+ ISR(vect) { \
+ intFunc[interrupt](); \
+ }
+
+#if defined(__AVR_ATmega32U4__)
+
+IMPLEMENT_ISR(INT0_vect, EXTERNAL_INT_0)
+IMPLEMENT_ISR(INT1_vect, EXTERNAL_INT_1)
+IMPLEMENT_ISR(INT2_vect, EXTERNAL_INT_2)
+IMPLEMENT_ISR(INT3_vect, EXTERNAL_INT_3)
+IMPLEMENT_ISR(INT6_vect, EXTERNAL_INT_4)
+
+#elif defined(__AVR_AT90USB82__) || defined(__AVR_AT90USB162__) || defined(__AVR_ATmega32U2__) || defined(__AVR_ATmega16U2__) || defined(__AVR_ATmega8U2__)
+
+IMPLEMENT_ISR(INT0_vect, EXTERNAL_INT_0)
+IMPLEMENT_ISR(INT1_vect, EXTERNAL_INT_1)
+IMPLEMENT_ISR(INT2_vect, EXTERNAL_INT_2)
+IMPLEMENT_ISR(INT3_vect, EXTERNAL_INT_3)
+IMPLEMENT_ISR(INT4_vect, EXTERNAL_INT_4)
+IMPLEMENT_ISR(INT5_vect, EXTERNAL_INT_5)
+IMPLEMENT_ISR(INT6_vect, EXTERNAL_INT_6)
+IMPLEMENT_ISR(INT7_vect, EXTERNAL_INT_7)
+
+#elif defined(EICRA) && defined(EICRB)
+
+IMPLEMENT_ISR(INT0_vect, EXTERNAL_INT_2)
+IMPLEMENT_ISR(INT1_vect, EXTERNAL_INT_3)
+IMPLEMENT_ISR(INT2_vect, EXTERNAL_INT_4)
+IMPLEMENT_ISR(INT3_vect, EXTERNAL_INT_5)
+IMPLEMENT_ISR(INT4_vect, EXTERNAL_INT_0)
+IMPLEMENT_ISR(INT5_vect, EXTERNAL_INT_1)
+IMPLEMENT_ISR(INT6_vect, EXTERNAL_INT_6)
+IMPLEMENT_ISR(INT7_vect, EXTERNAL_INT_7)
+
+#else
+
+IMPLEMENT_ISR(INT0_vect, EXTERNAL_INT_0)
+IMPLEMENT_ISR(INT1_vect, EXTERNAL_INT_1)
+
+#if defined(EICRA) && defined(ISC20)
+IMPLEMENT_ISR(INT2_vect, EXTERNAL_INT_2)
+#endif
+
+#endif
projects / max / tmk_keyboard.git / blobdiff