X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;ds=inline;f=common%2Fcommand.c;h=4649e00ab020900c195be0c1206792ac53d4f5e2;hb=f4c69652c17e97241e2f7b7f22ab438e9a3ceb0a;hp=dc06c6da35d642d7d5ae42a940dfeed308ae68ac;hpb=c6d88d27956c4b76f8819fcdb076bf94a8f55868;p=max%2Ftmk_keyboard.git
diff --git a/common/command.c b/common/command.c
index dc06c6da..4649e00a 100644
--- a/common/command.c
+++ b/common/command.c
@@ -31,6 +31,7 @@ along with this program. If not, see .
#include "sleep_led.h"
#include "led.h"
#include "command.h"
+#include "backlight.h"
#ifdef MOUSEKEY_ENABLE
#include "mousekey.h"
@@ -106,11 +107,13 @@ static void command_common_help(void)
print("x: toggle matrix debug\n");
print("k: toggle keyboard debug\n");
print("m: toggle mouse debug\n");
- print("p: toggle print enable\n");
+#ifdef SLEEP_LED_ENABLE
+ print("z: toggle sleep LED test\n");
+#endif
print("v: print device version & info\n");
print("t: print timer count\n");
print("s: print status\n");
- print("e: print eeprom boot config\n");
+ print("e: print eeprom config\n");
#ifdef NKRO_ENABLE
print("n: toggle NKRO\n");
#endif
@@ -125,28 +128,36 @@ static void command_common_help(void)
}
#ifdef BOOTMAGIC_ENABLE
-static void print_eeprom_config(void)
+static void print_eeconfig(void)
{
- uint8_t eebyte;
-
- eebyte = eeconfig_read_debug();
- print("debug: "); print_hex8(eebyte); print("\n");
-
- eebyte = eeconfig_read_defalt_layer();
- print("defalt_layer: "); print_hex8(eebyte); print("\n");
-
- eebyte = eeconfig_read_keyconf();
- print("keyconf: "); print_hex8(eebyte); print("\n");
-
- keyconf kc;
- kc = (keyconf){ .raw = eebyte };
- print("keyconf.swap_control_capslock: "); print_hex8(kc.swap_control_capslock); print("\n");
- print("keyconf.capslock_to_control: "); print_hex8(kc.capslock_to_control); print("\n");
- print("keyconf.swap_lalt_lgui: "); print_hex8(kc.swap_lalt_lgui); print("\n");
- print("keyconf.swap_ralt_rgui: "); print_hex8(kc.swap_ralt_rgui); print("\n");
- print("keyconf.no_gui: "); print_hex8(kc.no_gui); print("\n");
- print("keyconf.swap_grave_esc: "); print_hex8(kc.swap_grave_esc); print("\n");
- print("keyconf.swap_backslash_backspace: "); print_hex8(kc.swap_backslash_backspace); print("\n");
+ print("default_layer: "); print_dec(eeconfig_read_default_layer()); print("\n");
+
+ debug_config_t dc;
+ dc.raw = eeconfig_read_debug();
+ print("debug_config.raw: "); print_hex8(dc.raw); print("\n");
+ print(".enable: "); print_dec(dc.enable); print("\n");
+ print(".matrix: "); print_dec(dc.matrix); print("\n");
+ print(".keyboard: "); print_dec(dc.keyboard); print("\n");
+ print(".mouse: "); print_dec(dc.mouse); print("\n");
+
+ keymap_config_t kc;
+ kc.raw = eeconfig_read_keymap();
+ print("keymap_config.raw: "); print_hex8(kc.raw); print("\n");
+ print(".swap_control_capslock: "); print_dec(kc.swap_control_capslock); print("\n");
+ print(".capslock_to_control: "); print_dec(kc.capslock_to_control); print("\n");
+ print(".swap_lalt_lgui: "); print_dec(kc.swap_lalt_lgui); print("\n");
+ print(".swap_ralt_rgui: "); print_dec(kc.swap_ralt_rgui); print("\n");
+ print(".no_gui: "); print_dec(kc.no_gui); print("\n");
+ print(".swap_grave_esc: "); print_dec(kc.swap_grave_esc); print("\n");
+ print(".swap_backslash_backspace: "); print_dec(kc.swap_backslash_backspace); print("\n");
+
+#ifdef BACKLIGHT_ENABLE
+ backlight_config_t bc;
+ bc.raw = eeconfig_read_backlight();
+ print("backlight_config.raw: "); print_hex8(bc.raw); print("\n");
+ print(".enable: "); print_dec(bc.enable); print("\n");
+ print(".level: "); print_dec(bc.level); print("\n");
+#endif
}
#endif
@@ -154,16 +165,18 @@ static bool command_common(uint8_t code)
{
static host_driver_t *host_driver = 0;
switch (code) {
+#ifdef SLEEP_LED_ENABLE
case KC_Z:
// test breathing sleep LED
print("Sleep LED test\n");
sleep_led_toggle();
led_set(host_keyboard_leds());
break;
+#endif
#ifdef BOOTMAGIC_ENABLE
case KC_E:
- print("eeprom config\n");
- print_eeprom_config();
+ print("eeconfig:\n");
+ print_eeconfig();
break;
#endif
case KC_CAPSLOCK:
@@ -574,7 +587,7 @@ static uint8_t numkey2num(uint8_t code)
static void switch_default_layer(uint8_t layer)
{
print("switch_default_layer: "); print_dec(biton32(default_layer_state));
- default_layer_set(layer);
- print(" to "); print_dec(biton32(default_layer_state)); print("\n");
+ print(" to "); print_dec(layer); print("\n");
+ default_layer_set(1UL<