X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;ds=sidebyside;f=converter%2Fpc98_usb%2Fconfig.h;h=4f91c07ce440e6777c926983acc1a4388579282b;hb=51050875b7f1dd5216ba46298f95cf3030a36211;hp=6f9f8fc3cf17d948634cc7730dfaa3e924a62c40;hpb=eb776c1b7918f320b717cedfd8957f55e53c5adf;p=max%2Ftmk_keyboard.git
diff --git a/converter/pc98_usb/config.h b/converter/pc98_usb/config.h
index 6f9f8fc3..4f91c07c 100644
--- a/converter/pc98_usb/config.h
+++ b/converter/pc98_usb/config.h
@@ -19,7 +19,7 @@ along with this program. If not, see .
#define CONFIG_H
#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x3333
+#define PRODUCT_ID 0x9898
#define DEVICE_VER 0x0100
#define MANUFACTURER t.m.k.
#define PRODUCT PC98 keyboard converter
@@ -27,71 +27,100 @@ along with this program. If not, see .
/* matrix size */
-#define MATRIX_ROWS 16
-#define MATRIX_COLS 8
+#define MATRIX_ROWS 16
+#define MATRIX_COLS 8
+/* To use new keymap framework */
+#define USE_KEYMAP_V2
/* key combination for command */
-#define IS_COMMAND() ( \
- keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
- keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
- keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
+#define IS_COMMAND() ( \
+ host_get_first_key() == KC_CANCEL \
)
-/* PC98 control */
+
+/* PC98 Reset Port shared with TXD */
#define PC98_RST_DDR DDRD
#define PC98_RST_PORT PORTD
-#define PC98_RST_BIT 1
+#define PC98_RST_BIT 3
+/* PC98 Ready Port */
#define PC98_RDY_DDR DDRD
#define PC98_RDY_PORT PORTD
#define PC98_RDY_BIT 4
+/* PC98 Retry Port */
#define PC98_RTY_DDR DDRD
#define PC98_RTY_PORT PORTD
#define PC98_RTY_BIT 5
-/* Serial(USART) configuration
- * asynchronous, negative logic, 19200baud, no flow control
+/*
+ * PC98 Serial(USART) configuration
+ * asynchronous, positive logic, 19200baud, bit order: LSB first
* 1-start bit, 8-data bit, odd parity, 1-stop bit
*/
-#define SERIAL_BAUD 19200
-#define SERIAL_PARITY_ODD
-#define SERIAL_BIT_ORDER_LSB
-
-#define SERIAL_RXD_DDR DDRD
-#define SERIAL_RXD_PORT PORTD
-#define SERIAL_RXD_PIN PIND
-#define SERIAL_RXD_BIT 2
-#define SERIAL_RXD_VECT INT2_vect
-#define SERIAL_RXD_INIT() do { \
+/*
+ * Software Serial
+ */
+#define SERIAL_SOFT_BAUD 19200
+#define SERIAL_SOFT_PARITY_ODD
+#define SERIAL_SOFT_BIT_ORDER_LSB
+#define SERIAL_SOFT_LOGIC_POSITIVE
+/* RXD Port */
+#define SERIAL_SOFT_RXD_DDR DDRD
+#define SERIAL_SOFT_RXD_PORT PORTD
+#define SERIAL_SOFT_RXD_PIN PIND
+#define SERIAL_SOFT_RXD_BIT 2
+#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<>8); /* baud rate */ \
+ UCSR1B |= (1<