X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;ds=sidebyside;f=converter%2Fpc98_usb%2Fconfig.h;h=b7a00ed7bd51bdc82476dc9b6f68b3b34be69709;hb=3e8289b53ce929484651fc065fb5f718e4e3ae21;hp=aa0476e3e8e94b68dff9d65e63872f939ae6e256;hpb=fea6792f1636a716e799539b072930461bfcba67;p=max%2Ftmk_keyboard.git
diff --git a/converter/pc98_usb/config.h b/converter/pc98_usb/config.h
index aa0476e3..b7a00ed7 100644
--- a/converter/pc98_usb/config.h
+++ b/converter/pc98_usb/config.h
@@ -19,34 +19,32 @@ along with this program. If not, see .
#define CONFIG_H
#define VENDOR_ID 0xFEED
-#define PRODUCT_ID 0x9898
-#define DEVICE_VER 0x0100
+#define PRODUCT_ID 0x9801
+#define DEVICE_VER 0x0101
#define MANUFACTURER t.m.k.
#define PRODUCT PC98 keyboard converter
#define DESCRIPTION converts PC98 keyboard protocol into USB
/* matrix size */
-#define MATRIX_ROWS 16
-#define MATRIX_COLS 8
-
-/* To use new keymap framework */
-#define USE_KEYMAP_V2
+#define MATRIX_ROWS 16
+#define MATRIX_COLS 8
/* key combination for command */
-#define IS_COMMAND() ( \
- host_get_first_key() == KC_CANCEL \
+#define IS_COMMAND() ( \
+ matrix_is_on(12, 0) || /* STOP */ \
+ keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) \
)
-/* PC98 Serial(USART) configuration
- * asynchronous, positive logic, 19200baud, bit order: LSB first
- * 1-start bit, 8-data bit, odd parity, 1-stop bit
- */
-#define SERIAL_BAUD 19200
-#define SERIAL_PARITY_ODD
-#define SERIAL_BIT_ORDER_LSB
-#define SERIAL_LOGIC_POSITIVE
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* Control LED indicatiors, which doesn't work well with locking support */
+#define PC98_LED_CONTROL
+
/* PC98 Reset Port shared with TXD */
#define PC98_RST_DDR DDRD
@@ -59,52 +57,81 @@ along with this program. If not, see .
/* PC98 Retry Port */
#define PC98_RTY_DDR DDRD
#define PC98_RTY_PORT PORTD
-#define PC98_RTY_BIT 5
+#define PC98_RTY_BIT 1
+/*
+ * PC98 Serial(USART) configuration
+ * asynchronous, positive logic, 19200baud, bit order: LSB first
+ * 1-start bit, 8-data bit, odd parity, 1-stop bit
+ */
+
+/*
+ * Software Serial
+ * Add protocol/serial_soft.c to SRC in Makefile
+ */
+#define SERIAL_SOFT_BAUD 19200
+#define SERIAL_SOFT_PARITY_ODD
+#define SERIAL_SOFT_BIT_ORDER_LSB
+#define SERIAL_SOFT_LOGIC_POSITIVE
/* RXD Port */
-#define SERIAL_RXD_DDR DDRD
-#define SERIAL_RXD_PORT PORTD
-#define SERIAL_RXD_PIN PIND
-#define SERIAL_RXD_BIT 2
-#ifdef SERIAL_LOGIC_NEGATIVE
-#define SERIAL_RXD_READ() ~(SERIAL_RXD_PIN&(1<>8); /* baud rate */ \
+ UCSR1B |= (1<