X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;ds=sidebyside;f=converter%2Fpc98_usb%2Fconfig.h;h=d3898d905f0609da50dba3b7856527f21f4f332a;hb=aa5dd8fccfa372caf926aa8ef826380005b47609;hp=6793c7945999777eb11ac0e4105003f9125a1867;hpb=54c9e737d0f5c4b52294f5bd9da0bbebda8d86f6;p=max%2Ftmk_keyboard.git

diff --git a/converter/pc98_usb/config.h b/converter/pc98_usb/config.h
index 6793c794..d3898d90 100644
--- a/converter/pc98_usb/config.h
+++ b/converter/pc98_usb/config.h
@@ -19,8 +19,8 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define CONFIG_H
 
 #define VENDOR_ID       0xFEED
-#define PRODUCT_ID      0x9898
-#define DEVICE_VER      0x0100
+#define PRODUCT_ID      0x9801
+#define DEVICE_VER      0x0101
 #define MANUFACTURER    t.m.k.
 #define PRODUCT         PC98 keyboard converter
 #define DESCRIPTION     converts PC98 keyboard protocol into USB
@@ -43,7 +43,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define LOCKING_RESYNC_ENABLE
 
 /* Control LED indicatiors, which doesn't work well with locking support */
-//#define PC98_LED_CONTROL
+#define PC98_LED_CONTROL
 
 
 /* PC98 Reset Port shared with TXD */
@@ -64,8 +64,10 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *     asynchronous, positive logic, 19200baud, bit order: LSB first
  *     1-start bit, 8-data bit, odd parity, 1-stop bit
  */
+
 /*
  * Software Serial
+ *   Add protocol/serial_soft.c to SRC in Makefile
  */
 #define SERIAL_SOFT_BAUD                19200
 #define SERIAL_SOFT_PARITY_ODD
@@ -110,6 +112,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 /*
  * Hardware Serial(UART)
+ *   Add protocol/serial_uart.c to SRC in Makefile
  */
 #if defined(__AVR_ATmega32U4__) || defined(__AVR_ATmega32U2__)
     #define SERIAL_UART_BAUD       19200
@@ -123,6 +126,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
         UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); /* RX interrupt, RX: enable */ \
         UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); /* TX interrupt, TX: enable */ \
         UCSR1C |= (1<<UPM11) | (1<<UPM10);  /* parity: none(00), even(01), odd(11) */ \
+        DDRD  &= ~(1<<2); PORTD |=  (1<<2); /* Pull-up RXD pin */ \
         sei(); \
     } while(0)
 #else