X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;f=README.md;h=f03c9165ea272fdd3b719fced853ffa2416b24f9;hb=83a3de38b710d0eb5a752ffded6da2e8bf818b22;hp=f460d0ed44aaf7079b2ae47273fe9f36f09c8b43;hpb=28203e909e83b1ac6becb45a3eadae23b190df32;p=max%2Ftmk_keyboard.git diff --git a/README.md b/README.md index f460d0ed..f03c9165 100644 --- a/README.md +++ b/README.md @@ -1,17 +1,21 @@ -TMK Keyboard Firmware Core Library -================================== -This is a keyboard firmware library with some useful features for Atmel AVR and Cortex-M. +TMK Keyboard Firmware Collection +================================ +This is a keyboard firmware with some useful features for Atmel AVR controller. -Source code is available here: +Source code is available here: Updates ------- #### 2016/02/10 -flabbergast's Chibios protocol was merged from . See [protocol/chibios/README.md](protocol/chibios/README.md). Chibios protocol supports Cortex-M such as STM32 and Kinetis. +core: flabbergast's Chibios protocol was merged from (@72b1668). See [tmk_core/protocol/chibios/README.md](tmk_core/protocol/chibios/README.md). Chibios protocol supports Cortex-M such as STM32 and Kinetis. #### 2015/04/22 -separated with TMK Keyboard Firmware Collection +Core library was separated to other branch `core`. + +In `Makefile` you need to set `TMK_DIR` to indicate core library location now. + + TMK_DIR = ../../tmk_core @@ -37,60 +41,180 @@ These features can be used in your keyboard. -TMK Keyboard Firmware Collection --------------------------------- -Complete firmwares for various keyboards and protocol converters. - - +Projects +-------- +You can find some keyboard specific projects under `converter` and `keyboard` directory. + +### converter +* [ps2_usb](converter/ps2_usb/) - [PS/2 keyboard to USB][GH_ps2] +* [adb_usb](converter/adb_usb/) - [ADB keyboard to USB][GH_adb] +* [m0110_usb](converter/m0110_usb) - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110] +* [terminal_usb](converter/terminal_usb/) - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal] +* [news_usb](converter/news_usb/) - [Sony NEWS keyboard to USB][GH_news] +* [x68k_usb](converter/x68k_usb/) - [Sharp X68000 keyboard to USB][GH_x68k] +* [sun_usb](converter/sun_usb/) - [Sun] to USB(type4, 5 and 3?) +* [pc98_usb](converter/pc98_usb/) - [PC98] to USB +* [usb_usb](converter/usb_usb/) - USB to USB(experimental) +* [ascii_usb](converter/ascii_usb/) - ASCII(Serial console terminal) to USB +* [ibm4704_usb](converter/ibm4704_usb) - [IBM 4704 keyboard Converter][GH_ibm4704] + +### keyboard +* [hhkb](keyboard/hhkb/) - [Happy Hacking Keyboard pro][GH_hhkb] **my main board** +* [gh60](keyboard/gh60/) - [GH60] DIY 60% keyboard [prototype][GH60_proto] **my second board** +* [hbkb](keyboard/hbkb/) - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod) +* [hid_liber](keyboard/hid_liber/) - [HID liberation][HID_liber] controller (by alaricljs) +* [phantom](keyboard/phantom/) - [Phantom] keyboard (by Tranquilite) +* [IIgs_Standard](keyboard/IIgs/) - Apple [IIGS] keyboard mod(by JeffreySung) +* [macway](keyboard/macway/) - [Compact keyboard mod][GH_macway] [retired] +* [KMAC](keyboard/kmac/) - Korean custom keyboard +* [Lightsaber](keyboard/lightsaber/) - Korean custom keyboard +* [Infinity](keyboard/infinity/) - Massdrop [Infinity keyboard][Infinity] +* [NerD](keyboard/nerd/) - Korean custom keyboard +* [KittenPaw](keyboard/kitten_paw) - Custom Majestouch controller +* [Lightpad](keyboard/lightpad) - Korean custom keypad +* [ghost_squid](keyboard/ghost_squid/) - [The Ghost Squid][ghost_squid] controller for [Cooler Master QuickFire XT][cmxt] + +### Extenal projects using tmk_keyboard +* [ErgoDox_cub-uanic][cub-uanic] - Split Ergonomic Keyboard [ErgoDox][ergodox_org] +* [mcdox][mcdox_tmk] - [mcdox][mcdox] + + +[GH_macway]: http://geekhack.org/showwiki.php?title=Island:11930 +[GH_hhkb]: http://geekhack.org/showwiki.php?title=Island:12047 +[GH_ps2]: http://geekhack.org/showwiki.php?title=Island:14618 +[GH_adb]: http://geekhack.org/showwiki.php?title=Island:14290 +[GH_hhkb_bt]: http://geekhack.org/showwiki.php?title=Island:20851 +[GH_m0110]: http://geekhack.org/showwiki.php?title=Island:24965 +[GH_news]: http://geekhack.org/showwiki.php?title=Island:25759 +[GH_terminal]: http://geekhack.org/showwiki.php?title=Island:27272 +[GH_x68k]: http://geekhack.org/showwiki.php?title=Island:29060 +[GH_hbkb]: http://geekhack.org/showwiki.php?title=Island:29483 +[GH_ibm4704]: http://geekhack.org/index.php?topic=54706.0 +[HID_liber]: http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions +[Phantom]: http://geekhack.org/index.php?topic=26742 +[GH60]: http://geekhack.org/index.php?topic=34959 +[GH60_proto]: http://geekhack.org/index.php?topic=37570.0 +[PC98]: http://en.wikipedia.org/wiki/NEC_PC-9801 +[Sun]: http://en.wikipedia.org/wiki/Sun-3 +[IIGS]: http://en.wikipedia.org/wiki/Apple_IIGS +[Infinity]: https://www.massdrop.com/buy/infinity-keyboard-kit +[ghost_squid]: http://deskthority.net/wiki/Costar_replacement_controllers#The_Ghost_Squid +[cmxt]: http://gaming.coolermaster.com/en/products/keyboards/quickfirext/ +[ergodox_org]: http://ergodox.org/ +[cub-uanic]: https://github.com/cub-uanic/tmk_keyboard/tree/master/keyboard/ergodox +[mcdox]: https://github.com/DavidMcEwan/mcdox +[mcdox_tmk]: https://github.com/DavidMcEwan/tmk_keyboard/tree/master/keyboard/mcdox License ------- **GPLv2** or later. Some protocol files are under **Modified BSD License**. -LUFA, PJRC and V-USB stack have their own license respectively. + +Third party libraries like LUFA, PJRC and V-USB have their own license respectively. Build Firmware and Program Controller ------------------------------------- -See [doc/build.md](doc/build.md). +See [tmk_core/doc/build.md](tmk_core/doc/build.md). + + + +Change your keymap +------------------ +See [tmk_core/doc/keymap.md](tmk_core/doc/keymap.md). + + + +Magic Commands +-------------- +To see help press `Magic` + `H`. + +`Magic` key combination is `LShift` + `RShift` in many project, but `Power` key on ADB converter. +`Magic` keybind can be vary on each project, check `config.h` in project directory. + +Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed. + + ----- Command Help ----- + c: enter console mode + d: toggle debug enable + x: toggle matrix debug + k: toggle keyboard debug + m: toggle mouse debug + v: print device version & info + t: print timer count + s: print status + e: print eeprom config + n: toggle NKRO + 0/F10: switch to Layer0 + 1/F1: switch to Layer1 + 2/F2: switch to Layer2 + 3/F3: switch to Layer3 + 4/F4: switch to Layer4 + PScr: power down/remote wake-up + Caps: Lock Keyboard(Child Proof) + Paus: jump to bootloader + + + +Boot Magic Configuration - Virtual DIP Switch +--------------------------------------------- +Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable. +Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles. + +To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [tmk_core/common/bootmagic.h](tmk_core/common/bootmagic.h). + +#### General +- Skip reading EEPROM to start with default configuration(`ESC`) +- Clear configuration stored in EEPROM to reset configuration(`Backspace`) + +#### Bootloader +- Kick up Bootloader(`B`) + +#### Debug +- Debug enable(`D`) +- Debug matrix enable(`D`+`X`) +- Debug keyboard enable(`D`+`K`) +- Debug mouse enable(`D`+`M`) + +#### Keymap +- Swap Control and CapsLock(`Left Control`) +- Change CapsLock to Control(`Caps Lock`) +- Swap LeftAlt and Gui(`Left Alt`) +- Swap RightAlt and Gui(`Right Alt`) +- Disable Gui(`Left Gui`) +- Swap Grave and Escape(`Grave`) +- Swap BackSlash and BackSpace(`Back Slash`) +- Enable NKRO on boot(`N`) + +#### Default Layer +- Set Default Layer to 0(`0`) +- Set Default Layer to 1(`1`) +- Set Default Layer to 2(`2`) +- Set Default Layer to 3(`3`) +- Set Default Layer to 4(`4`) +- Set Default Layer to 5(`5`) +- Set Default Layer to 6(`6`) +- Set Default Layer to 7(`7`) + + + +Mechanical Locking support +-------------------------- +This feature makes it possible for you to use mechanical locking switch for `CapsLock`, `NumLock` +or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LN +UM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Res +ync option tries to keep switch state consistent with keyboard LED state. + + #define LOCKING_SUPPORT_ENABLE + #define LOCKING_RESYNC_ENABLE Start Your Own Project ----------------------- **TBD** -### Config.h Options -#### 1. USB vendor/product ID and device description - #define VENDOR_ID 0xFEED - #define PRODUCT_ID 0xBEEF - #define MANUFACTURER t.m.k. - #define PRODUCT Macway mod - #define DESCRIPTION t.m.k. keyboard firmware for Macway mod - -#### 2. Keyboard matrix configuration - #define MATRIX_ROWS 8 - #define MATRIX_COLS 8 - #define MATRIX_HAS_GHOST - - - -Architecture ------------- - Architecture Diagram - +---------------+---------------+-------------+ - | Host | Keyboard | Matrix, LED | - ___________ |-----------+-+ +-------------+ | +-----------| - / /| Keys/Mouse | Protocol |d| | Action | | | Protocol | - /__________/ |<-----------| LUFA |r| | Layer, Tap | | | Matrix | - |.--------.| | LED | V-USB |i| |-------------| | | PS/2,IBM | __________________ - || || |----------->| PJRC |v| | Keymap | | | ADB,M0110| Keys / /_/_/_/_/_/_/_/ /| - || Host || | Console | iWRAP(BT)|e| | Mousekey | | | SUN/NEWS |<----------/ /_/_/_/_/_/_/_/ / / - ||________||/.<-----------| UART |r| | Report | | | X68K/PC98| Control / /_/_/_/_/_/_/_/ / / - `_========_'/| |---------------------------------------------|-------->/___ /_______/ ___/ / - |_o______o_|/ | Sendchar, Print, Debug, Command, ... | |_________________|/ - +---------------------------------------------+ Keyboard @@ -98,53 +222,26 @@ Debugging -------- Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack. -You can use xprintf() to display debug info on `hid_listen`, see `common/xprintf.h`. +You can use xprintf() to display debug info on `hid_listen`, see `tmk_core/common/xprintf.h`. Files and Directories ------------------- ### Top -* common/ - common codes -* protocol/ - keyboard protocol support -* doc/ - documents -* common.mk - Makefile for common -* protocol.mk - Makefile for protocol -* rules.mk - Makefile for build rules - -### Common -* host.h -* host_driver.h -* keyboard.h -* command.h -* keymap.h -* action.h -* keycode.h -* matrix.h -* led.h -* mousekey.h -* report.h -* debug.h -* print.h -* bootloader.h -* sendchar.h -* timer.h -* util.h - -### Keyboard Protocols -* lufa/ - LUFA USB stack -* pjrc/ - PJRC USB stack -* vusb/ - Objective Development V-USB -* iwrap/ - Bluetooth HID for Bluegiga iWRAP -* ps2.c - PS/2 protocol -* adb.c - Apple Desktop Bus protocol -* m0110.c - Macintosh 128K/512K/Plus keyboard protocol -* news.c - Sony NEWS keyboard protocol -* x68k.c - Sharp X68000 keyboard protocol -* serial_soft.c - Asynchronous Serial protocol implemented by software +* keyboard/ - keyboard projects +* converter/ - protocol converter projects +* tmk_core/ - core library +* tmk_core/doc/ - documents Coding Style ------------- - Doesn't use Tab to indent, use 4-spaces instead. + + + +Other Keyboard Firmware Projects +------------------ +You can learn a lot about keyboard firmware from these. See [Other Projects](https://github.com/tmk/tmk_keyboard/wiki/Other-Protjects) other than TMK.