X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;f=converter%2Fibm4704_usb%2FREADME.md;h=38478455d6dbc500e724167d5a06a8d270a34cc0;hb=45e45691e0c03f1b5ea4341c6d90f9a09016a37d;hp=25b72ba671718e1660f55e4c3d5c04e54ed0b238;hpb=2d9e0d5cab534cf70471f6dd37f8e624354e67b3;p=max%2Ftmk_keyboard.git

diff --git a/converter/ibm4704_usb/README.md b/converter/ibm4704_usb/README.md
index 25b72ba6..38478455 100644
--- a/converter/ibm4704_usb/README.md
+++ b/converter/ibm4704_usb/README.md
@@ -1,13 +1,17 @@
 IBM 4704 to USB keyboard converter
 ==================================
 This firmware converts IBM 4704 keyboard protocol to USB HID.
+Keyboard initialization process takes a few seconds at start up. **You may need to plug USB cable after hooking up your keyboard to the converter.**
 
-Keyboard initialization process takes a few seconds at start up. During that you will hear buzzer from the keyboard. **You need to plug USB cable after hooking up your keyboard to the converter.**
+TMK Converter for IBM4704 is available here: https://geekhack.org/index.php?topic=72052.0
 
 
 Update
 ------
-2015/05/05  Added keymaps for 107-key, 77-key and 50-key. Thanks, orihalcon @ geekhack!
+- 2016/09/30  Unimap editor support
+- 2015/09/07  Added keymap for Alps 102-key. Thanks, tai @ geekhack!
+- 2015/05/05  Added keymaps for 107-key, 77-key and 50-key. Thanks, orihalcon @ geekhack!
+- 2015/05/19  Fixed a protocol handling bug.
 
 
 
@@ -45,24 +49,39 @@ Keyboard Plug from front:
 
 Connection
 ----------
-In case of using ATMega32U4(Teensy2.0):
+In case of using ATMega32U4/U2
 
 1. Supply power with VCC and GND.
 2. Connect CLOCK to PD1 and DATA to PD0. You can change pin with config.h.
 3. Optionally you may need pull-up register. 1KOhm probably work.
 
+TMK Converter can supports IBM 4704.
+https://github.com/tmk/keyboard_converter
+
 
 Build Firmware
 --------------
 Just run `make`:
 
-    $ make
+    $ make -f <makefile>
+
+For TMK Converter rev.1 use `Makefile.rev1` as makefile:
+
+    $ make -f Makefile.rev1
+
+For TMK Converter rev.2 use `Makefile.rev2` as makefile:
+
+    $ make -f Makefile.rev2
 
 To select keymap:
 
-    $ make KEYMAP=[plain|...]
+    $ make -f <makefile> KEYMAP=[plain|alsp102key|...]
+
+To indentify your TMK Converter revision see [this](https://github.com/tmk/keyboard_converter#pcb-revisions).
 
 
 Keymap
 ------
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.
+
+Use `KEYMAP_ALPS102()` to define your keymap for Alps models.