X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;f=converter%2Fibm4704_usb%2FREADME.md;h=45b1f683454168313e4d8da6a6397cb18fa6746e;hb=83a3de38b710d0eb5a752ffded6da2e8bf818b22;hp=68db4bd05004a6f7370a26f10da54a98e85e2de9;hpb=5ce9bf8353568b341b79b3cea676ea62a7d40442;p=max%2Ftmk_keyboard.git

diff --git a/converter/ibm4704_usb/README.md b/converter/ibm4704_usb/README.md
index 68db4bd0..45b1f683 100644
--- a/converter/ibm4704_usb/README.md
+++ b/converter/ibm4704_usb/README.md
@@ -7,9 +7,9 @@ Keyboard initialization process takes a few seconds at start up. During that you
 
 Update
 ------
-2015/09/07  Added keymap for Alps 102-key. Thanks, tai @ geekhack!
-2015/05/05  Added keymaps for 107-key, 77-key and 50-key. Thanks, orihalcon @ geekhack!
-2015/05/19  Fixed a protocol handling bug.
+- 2015/09/07  Added keymap for Alps 102-key. Thanks, tai @ geekhack!
+- 2015/05/05  Added keymaps for 107-key, 77-key and 50-key. Thanks, orihalcon @ geekhack!
+- 2015/05/19  Fixed a protocol handling bug.
 
 
 
@@ -47,22 +47,35 @@ Keyboard Plug from front:
 
 Connection
 ----------
-In case of using ATMega32U4(Teensy2.0):
+In case of using ATMega32U4/U2
 
 1. Supply power with VCC and GND.
 2. Connect CLOCK to PD1 and DATA to PD0. You can change pin with config.h.
 3. Optionally you may need pull-up register. 1KOhm probably work.
 
+TMK Converter can supports IBM 4704.
+https://github.com/tmk/keyboard_converter
+
 
 Build Firmware
 --------------
 Just run `make`:
 
-    $ make
+    $ make -f <makefile>
+
+For TMK Converter rev.1 use `Makefile.tmk_rev1` as makefile:
+
+    $ make -f Makefile.tmk_rev1
+
+For TMK Converter rev.2 use `Makefile.tmk_rev2` as makefile:
+
+    $ make -f Makefile.tmk_rev2
 
 To select keymap:
 
-    $ make KEYMAP=[plain|...]
+    $ make -f <makefile> KEYMAP=[plain|...]
+
+To indentify your TMK Converter revision see [this](https://github.com/tmk/keyboard_converter#pcb-revisions).
 
 
 Keymap