X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;f=converter%2Fm0110_usb%2FMakefile;h=e836456326a0b97f5fdb8f2c06c4eef12a63bba5;hb=b110884a6d55a7d126e59a43e6481ca51c52e5e8;hp=4a687b93334e378c951e2eb3c001bf0d5de3027f;hpb=afb08462085132acf7a1962522952f7dbf064519;p=max%2Ftmk_keyboard.git diff --git a/converter/m0110_usb/Makefile b/converter/m0110_usb/Makefile index 4a687b93..e8364563 100644 --- a/converter/m0110_usb/Makefile +++ b/converter/m0110_usb/Makefile @@ -1,28 +1,32 @@ # Target file name (without extension). -TARGET = m0110 +TARGET = m0110_lufa # Directory common source filess exist -TOP_DIR = ../.. +TMK_DIR = ../../tmk_core # Directory keyboard dependent files exist TARGET_DIR = . # keyboard dependent files -SRC = main.c \ - keymap.c \ - matrix.c \ +SRC = matrix.c \ led.c \ + keymap_common.c \ m0110.c +# To use own keymap file run make like: make keymap=hasu +ifdef KEYMAP + SRC += keymap_$(KEYMAP).c +else + SRC += keymap_default.c +endif + CONFIG_H = config.h # MCU name, you MUST set this to match the board you are using # type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 +MCU = atmega32u2 # TMK converter rev2 +#MCU = atmega32u4 # TMK converter rev1 # Processor frequency. @@ -33,13 +37,47 @@ MCU = atmega32u4 # Teensy 2.0 F_CPU = 16000000 +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + # Build Options # *Comment out* to disable the options. # -MOUSEKEY_ENABLE = yes # Mouse keys -#PS2_MOUSE_ENABLE = yes # PS/2 mouse(TrackPoint) support -EXTRAKEY_ENABLE = yes # Audio control and System control -#NKRO_ENABLE = yes # USB Nkey Rollover +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor @@ -47,11 +85,12 @@ EXTRAKEY_ENABLE = yes # Audio control and System control PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TMK_DIR) -include $(TOP_DIR)/protocol/pjrc.mk -include $(TOP_DIR)/protocol.mk -include $(TOP_DIR)/common.mk -include $(TOP_DIR)/rules.mk -hasu: EXTRAFLAGS += -DHASU -hasu: all +include $(TMK_DIR)/protocol/lufa.mk +include $(TMK_DIR)/protocol.mk +include $(TMK_DIR)/common.mk +include $(TMK_DIR)/rules.mk