X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;f=converter%2Fm0110_usb%2FREADME.md;h=668c85269b0c4dffdf935227c20330e0abab7edc;hb=814eaa2dffa10f8b3a9f5c5ae6fab430322056d7;hp=b3fb8f7e972705bb2f557aac2d469e2eb08f00c7;hpb=6ccea742deb84451a5815e40ccfc3aaa74feb622;p=max%2Ftmk_keyboard.git diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md index b3fb8f7e..668c8526 100644 --- a/converter/m0110_usb/README.md +++ b/converter/m0110_usb/README.md @@ -1,8 +1,10 @@ M0110/M0110A to USB keyboard converter ====================================== -This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer. +This firmware converts the protocol of Apple Macintosh keyboard **M0110**, **M0110A** and **M0120** into USB. Target of this project is USB AVR controller like **ATmega32U2** and **ATmega32U4**. Using this converter you can revive these retro keyboards with modern computer. -Pics of **M0110 + M0120** and **M0110A**. +Read README of top directory too. + +Pictures of **M0110 + M0120** and **M0110A** with [TMK converter]. ![M0110+M0120](http://i.imgur.com/dyvXb2Tm.jpg) ![M0110A](http://i.imgur.com/HuHOEoHm.jpg) @@ -17,24 +19,27 @@ Update ------ - 2013/08: Change port for signals `PF` to `PD` - 2013/09: Change port again, it uses inversely `PD0` for data and `PD1` for clock line now. +- 2014/06: Change keymaps +- 2015/03: Add support for "International"(ISO) keyboard(keymap_intl.c) +- 2016/09: Unimap support - keymap editor on web browser -Building Hardware ------------------ -You need **4P4C** cable and **ATMega32U4** board like PJRC [Teensy]. Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. +Hardware +-------- +You can buy preassembled [TMK converter] or make yourown with AVR dev board like PJRC [Teensy]. + +Port of the MCU `PD1` is assigned to `CLOCK` line and `PD0` to `DATA` by default, you can change pin configuration with editing `config.h`. -[![M0110 Converter](http://i.imgur.com/4G2ZOegm.jpg)](http://i.imgur.com/4G2ZOeg.jpg) +[![M0110 Converter](http://i.imgur.com/yEp2eRim.jpg)](http://i.imgur.com/yEp2eRi.jpg) ### 4P4C phone handset cable Note that original cable used with Mac is **straight** while phone handset cable is **crossover**. -Close-up pic of handset cable. You can see one end of plug has reverse color codes against the other. Click to enlarge. -[![4P4C cable](http://i.imgur.com/3S9P1mYm.jpg?1)](http://i.imgur.com/3S9P1mY.jpg?1) - [Teensy]: http://www.pjrc.com/teensy/ +[TMK converter]: https://geekhack.org/index.php?topic=72052.0 ### Socket Pinout @@ -43,92 +48,35 @@ Close-up pic of handset cable. You can see one end of plug has reverse color cod ![Jack fig](http://www.kbdbabel.org/conn/kbd_connector_macplus.png) -### Pull-up Registor -You may need pull-up registors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors. +### Pull-up Resistor +You may need pull-up resistors on signal lines(`CLOCK`, `DATA`) in particular when you have long or coiled cable. **1k-10k Ohm** will be OK for this purpose. In that case the converter may not read signal from keyboard correctly without pull-up resistors. -Building Frimware +Building Firmware ----------------- -To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. +To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to change compile options and pin configuration. Also `KEYMAP` option can be used to select keymap. $ git clone git://github.com/tmk/tmk_keyboard.git (or download source) $ cd m0110_usb - $ make -f Makefile clean - $ make -f Makefile + $ make -f Makefile.rev2 clean + $ make -f Makefile.rev2 [KEYMAP={intl|spacefn}] -and program your Teensy with [PJRC Teensy loader](http://www.pjrc.com/teensy/loader.html). +Use `Maefile.rev1` for TMK converter rev.1 and Teensy(ATMega32u4), instead. Keymap ------ -You can change keymaps by editing *keymap.c*. - -### M0110 & M0120 -#### *Default Layer* - ,---------------------------------------------------------. ,---------------. - | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| -|Lft|Rgt| - |---------------------------------------------------------| |---------------| - |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| Up| - |---------------------------------------------------------| |---------------| - |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| Dn| - |---------------------------------------------------------| |---------------| - |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | - `---------------------------------------------------------' |-----------|Ent| - |Ctl|Gui | Space |Alt |Ctl| | 0| .| | - `-----------------------------------------------' `---------------' - -- `Space` and `Enter` also work as `Fn` layer switch key when holding down. - -#### *Function Layer(WASD/HHKB)* - ,---------------------------------------------------------. ,---------------. - |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -|Lft|Rgt| - |---------------------------------------------------------| |---------------| - |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| \| | 7| 8| 9| Up| - |---------------------------------------------------------| |---------------| - |Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| Dn| - |---------------------------------------------------------| |---------------| - |Shift |End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| | - `---------------------------------------------------------' |-----------|Ent| - |Ctl|Gui | Space |Alt |Ctl| | 0| .| | - `-----------------------------------------------' `---------------' - - -### M0110A -#### *Default Layer* - ,---------------------------------------------------------. ,---------------. - | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *| - |---------------------------------------------------------| |---------------| - |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| - |-----------------------------------------------------' | |---------------| - |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +| - |---------------------------------------------------------| |---------------| - |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft| Up| | 1| 2| 3| | - |---------------------------------------------------------| |-----------|Ent| - |Ctrl |Gui | Space | \|Lft|Rgt|Dwn| | 0| .| | - `---------------------------------------------------------' `---------------' - -- `Space` and `Enter` also work as `Fn` layer switch key when holding down. -- `Backslash(\)` also works as `Alt` when holding down. - -#### *Function Layer(WASD/HHKB)* - ,---------------------------------------------------------. ,---------------. - |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| - |---------------------------------------------------------| |---------------| - |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| - |-----------------------------------------------------' | |---------------| - |Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| +| - |---------------------------------------------------------| |---------------| - |Shift |End| |PgD| | | | |End|PgD|Dow|Shif|PgU| | 1| 2| 3| | - |---------------------------------------------------------| |-----------|Ent| - |Ctrl |Gui | Space | \|Hom|End|PgD| | 0| .| | - `---------------------------------------------------------' `---------------' +To create your own keymap copy existent keymap file to `keymap_.c` and edit it. You can build with `make -f Makefile.rev2 KEYMAP=`. + +Or you can edit keymap on web browser and download firmware. +http://www.tmk-kbd.com/tmk_keyboard/editor/ Debug ----- -You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. The converter has some functions for debug, press `+H` simultaneously to get help. +You can use [PJRC HID listen](http://www.pjrc.com/teensy/hid_listen.html) to see debug output. The converter has some functions for debug, press `+H` simultaneously to get help. -- Command: `Shift+Option+Command`(`Shift+Alt+Gui` or `Shift+Alt+Control`) +- Magic combo: `Shift+Option+⌘` or `Shift+Option+Ctrl`(`Shift+Alt+Gui` or `Shift+Alt+Control`)