X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;f=converter%2Fsun_usb%2FMakefile;h=12eceb5e74fc0f348c86c7c649cf0ca9b6502431;hb=6b1976d05bd86086c529eefb7e733e3b87b37665;hp=73a83e93f821324e27134aad808683943c22ade1;hpb=353a9b56e6caee853d3f808d2bfedf07056b4518;p=max%2Ftmk_keyboard.git

diff --git a/converter/sun_usb/Makefile b/converter/sun_usb/Makefile
index 73a83e93..12eceb5e 100644
--- a/converter/sun_usb/Makefile
+++ b/converter/sun_usb/Makefile
@@ -2,7 +2,7 @@
 TARGET = sun_usb
 
 # Directory common source filess exist
-TOP_DIR = ../..
+TMK_DIR = ../../tmk_core
 
 # Directory keyboard dependent files exist
 TARGET_DIR = .
@@ -11,8 +11,8 @@ TARGET_DIR = .
 SRC =	keymap.c \
 	matrix.c \
 	led.c \
-	command_extra.c \
-	protocol/serial_soft.c
+	command_extra.c
+
 
 CONFIG_H = config.h
 
@@ -20,9 +20,10 @@ CONFIG_H = config.h
 # MCU name, you MUST set this to match the board you are using
 # type "make clean" after changing this, so all files will be rebuilt
 #MCU = at90usb162       # Teensy 1.0
-MCU = atmega32u4       # Teensy 2.0
+#MCU = atmega32u4       # Teensy 2.0
 #MCU = at90usb646       # Teensy++ 1.0
 #MCU = at90usb1286      # Teensy++ 2.0
+MCU = atmega32u2
 
 
 # Processor frequency.
@@ -62,8 +63,16 @@ OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
 MOUSEKEY_ENABLE = yes	# Mouse keys
 EXTRAKEY_ENABLE = yes	# Audio control and System control
 CONSOLE_ENABLE = yes	# Console for debug
+COMMAND_ENABLE = yes    # Commands for debug and configuration
+#HARDWARE_SERIAL = yes  # Use hardware serial (requires inverted serial, see README)
 #NKRO_ENABLE = yes	# USB Nkey Rollover
 
+ifdef HARDWARE_SERIAL
+	SRC := protocol/serial_uart.c $(SRC)
+	OPT_DEFS += -DHARDWARE_SERIAL
+else
+	SRC := protocol/serial_soft.c $(SRC)
+endif
 
 # Boot Section Size in bytes
 #   Teensy halfKay   512
@@ -74,10 +83,10 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
 
 # Search Path
 VPATH += $(TARGET_DIR)
-VPATH += $(TOP_DIR)
+VPATH += $(TMK_DIR)
 
 
-include $(TOP_DIR)/protocol/lufa.mk
-include $(TOP_DIR)/protocol.mk
-include $(TOP_DIR)/common.mk
-include $(TOP_DIR)/rules.mk
+include $(TMK_DIR)/protocol/lufa.mk
+include $(TMK_DIR)/protocol.mk
+include $(TMK_DIR)/common.mk
+include $(TMK_DIR)/rules.mk