X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;f=converter%2Fx68k_usb%2Fconfig_pjrc.h;h=c49b4a73e1de9446ec38b59f4304ca3c0ff8714e;hb=160e02d06a11682d994da905adb1345bc1dde249;hp=2df83a2cb493f5fa16b99be64bd0d58bab0c81fc;hpb=c0b7928e88e7d03b8fd57aede139a5d9514080f8;p=max%2Ftmk_keyboard.git

diff --git a/converter/x68k_usb/config_pjrc.h b/converter/x68k_usb/config_pjrc.h
index 2df83a2c..c49b4a73 100644
--- a/converter/x68k_usb/config_pjrc.h
+++ b/converter/x68k_usb/config_pjrc.h
@@ -34,30 +34,31 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 /* key combination for command */
 #define IS_COMMAND() ( \
     keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LCTRL) | MOD_BIT(KC_RSHIFT)) \
+    keyboard_report->mods == (MOD_BIT(KC_LGUI) | MOD_BIT(KC_RGUI)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) \
 )
 
 /* legacy keymap support */
 #define USE_LEGACY_KEYMAP
 
-/* mouse keys */
-#ifdef MOUSEKEY_ENABLE
-#   define MOUSEKEY_DELAY_TIME 255
-#endif
-
 
 /* USART configuration
  *     asynchronous, 2400baud, 8-data bit, non parity, 1-stop bit, no flow control
  */
 #ifdef __AVR_ATmega32U4__
-#   define KBD_RX_VECT        USART1_RX_vect
-#   define KBD_RX_DATA        UDR1
-#   define KBD_RX_BAUD        2400
-#   define KBD_RX_UBBR        ((F_CPU/(16UL*KBD_RX_BAUD))-1)
-#   define KBD_RX_INIT()      do { \
-        UBRR1L = (uint8_t) KBD_RX_UBBR; \
-        UBRR1H = (uint8_t) (KBD_RX_UBBR>>8); \
-        UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); \
+    #define SERIAL_UART_BAUD       2400
+    #define SERIAL_UART_DATA       UDR1
+    #define SERIAL_UART_UBRR       ((F_CPU/(16UL*SERIAL_UART_BAUD))-1)
+    #define SERIAL_UART_RXD_VECT   USART1_RX_vect
+    #define SERIAL_UART_TXD_READY  (UCSR1A&(1<<UDRE1))
+    #define SERIAL_UART_INIT()     do { \
+        UBRR1L = (uint8_t) SERIAL_UART_UBRR;       /* baud rate */ \
+        UBRR1H = (uint8_t) (SERIAL_UART_UBRR>>8);  /* baud rate */ \
+        UCSR1B = (1<<RXCIE1) | (1<<RXEN1) | /* RX: interrupt, RX: enable */ \
+                 (1<<TXEN1);                /* TX: enable */ \
+        UCSR1C = (0<<UPM11) | (0<<UPM10) | /* parity: none(00), even(01), odd(11) */ \
+                 (0<<UCSZ12) | (1<<UCSZ11) | (1<<UCSZ10); /* data-8bit(011) */ \
+        sei(); \
     } while(0)
 #else
 #   error "USART configuration is needed."