X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;f=keyboard%2Fonekey%2Fusbconfig.h;h=01e5aa6d2fcb81c5a1c5d94c7f95079c884eb841;hb=b813d62a8bbd30c75396cce6068af0af370d7b7f;hp=d0ca4c717e57d252bd5ffc8edea198593838c3ec;hpb=e1e0e5b4fb4320e5f9512776912775fb9f589d4c;p=max%2Ftmk_keyboard.git

diff --git a/keyboard/onekey/usbconfig.h b/keyboard/onekey/usbconfig.h
index d0ca4c71..01e5aa6d 100644
--- a/keyboard/onekey/usbconfig.h
+++ b/keyboard/onekey/usbconfig.h
@@ -24,11 +24,11 @@ section at the end of this file).
 
 /* ---------------------------- Hardware Config ---------------------------- */
 
-#define USB_CFG_IOPORTNAME      D
+#define USB_CFG_IOPORTNAME      B
 /* This is the port where the USB bus is connected. When you configure it to
  * "B", the registers PORTB, PINB and DDRB will be used.
  */
-#define USB_CFG_DMINUS_BIT      3
+#define USB_CFG_DMINUS_BIT      1
 /* This is the bit number in USB_CFG_IOPORT where the USB D- line is connected.
  * This may be any bit in the port.
  */
@@ -161,7 +161,11 @@ section at the end of this file).
  * proceed, do a return after doing your things. One possible application
  * (besides debugging) is to flash a status LED on each packet.
  */
-/* #define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();} */
+#define USB_RESET_HOOK(resetStarts)     if(!resetStarts){hadUsbReset();}
+/* http://codeandlife.com/2012/02/22/v-usb-with-attiny45-attiny85-without-a-crystal/ */
+#ifndef __ASSEMBLER__
+extern void hadUsbReset(void); // define the function for usbdrv.c
+#endif
 /* This macro is a hook if you need to know when an USB RESET occurs. It has
  * one parameter which distinguishes between the start of RESET state and its
  * end.
@@ -202,7 +206,7 @@ section at the end of this file).
  * usbFunctionWrite(). Use the global usbCurrentDataToken and a static variable
  * for each control- and out-endpoint to check for duplicate packets.
  */
-#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   0
+#define USB_CFG_HAVE_MEASURE_FRAME_LENGTH   1
 /* define this macro to 1 if you want the function usbMeasureFrameLength()
  * compiled in. This function can be used to calibrate the AVR's RC oscillator.
  */
@@ -250,8 +254,8 @@ section at the end of this file).
  * obdev's free shared VID/PID pair. See the file USB-IDs-for-free.txt for
  * details.
  */
-#define USB_CFG_DEVICE_NAME     'P', 'S', '/', '2', ' ', 'k', 'e', 'y', 'b', 'o', 'a', 'r', 'd', ' ', 'c', 'o', 'n', 'v', 'e', 'r', 't', 'e', 'r'
-#define USB_CFG_DEVICE_NAME_LEN 23
+#define USB_CFG_DEVICE_NAME     'O', 'n', 'e', 'k', 'e', 'y'
+#define USB_CFG_DEVICE_NAME_LEN 6
 /* Same as above for the device name. If you don't want a device name, undefine
  * the macros. See the file USB-IDs-for-free.txt before you assign a name if
  * you use a shared VID/PID.