X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;f=protocol%2Flufa%2Flufa.c;h=86e9f23d1775c35b058a6df09a147c6592d69405;hb=ad4cba172b2eea37697ca531016c4c3b4defaeb7;hp=7c707209014f94569b2d9bf190532bc6407d0f04;hpb=afc3148e2341e4be982cdb628543e30923cfdaf7;p=max%2Ftmk_keyboard.git

diff --git a/protocol/lufa/lufa.c b/protocol/lufa/lufa.c
index 7c707209..86e9f23d 100644
--- a/protocol/lufa/lufa.c
+++ b/protocol/lufa/lufa.c
@@ -148,7 +148,6 @@ static void Console_Task(void)
 */
 void EVENT_USB_Device_Connect(void)
 {
-    led_set(0x1f);  // all on
 }
 
 void EVENT_USB_Device_Disconnect(void)
@@ -172,8 +171,9 @@ void EVENT_USB_Device_WakeUp()
 
 #ifdef SLEEP_LED_ENABLE
     sleep_led_disable();
-#endif
+    // NOTE: converters may not accept this
     led_set(host_keyboard_leds());
+#endif
 }
 
 void EVENT_USB_Device_StartOfFrame(void)
@@ -184,15 +184,6 @@ void EVENT_USB_Device_StartOfFrame(void)
 /** Event handler for the USB_ConfigurationChanged event.
  * This is fired when the host sets the current configuration of the USB device after enumeration.
  */
-#if LUFA_VERSION_INTEGER < 0x120730
-    /* old API 120219 */
-    #define ENDPOINT_CONFIG(epnum, eptype, epdir, epsize, epbank)    Endpoint_ConfigureEndpoint(epnum, eptype, epdir, epsize, epbank)
-#else
-    /* new API >= 120730 */
-    #define ENDPOINT_BANK_SINGLE 1
-    #define ENDPOINT_BANK_DOUBLE 2
-    #define ENDPOINT_CONFIG(epnum, eptype, epdir, epsize, epbank)    Endpoint_ConfigureEndpoint((epdir) | (epnum) , eptype, epsize, epbank)
-#endif
 void EVENT_USB_Device_ConfigurationChanged(void)
 {
     bool ConfigSuccess = true;
@@ -220,6 +211,12 @@ void EVENT_USB_Device_ConfigurationChanged(void)
     ConfigSuccess &= ENDPOINT_CONFIG(CONSOLE_OUT_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_OUT,
                                      CONSOLE_EPSIZE, ENDPOINT_BANK_SINGLE);
 #endif
+
+#ifdef NKRO_ENABLE
+    /* Setup NKRO HID Report Endpoints */
+    ConfigSuccess &= ENDPOINT_CONFIG(NKRO_IN_EPNUM, EP_TYPE_INTERRUPT, ENDPOINT_DIR_IN,
+                                     NKRO_EPSIZE, ENDPOINT_BANK_SINGLE);
+#endif
 }
 
 /*
@@ -345,17 +342,41 @@ static uint8_t keyboard_leds(void)
 
 static void send_keyboard(report_keyboard_t *report)
 {
-    uint8_t timeout = 0;
+    uint8_t timeout = 255;
+
+    if (USB_DeviceState != DEVICE_STATE_Configured)
+        return;
 
-    // TODO: handle NKRO report
     /* Select the Keyboard Report Endpoint */
-    Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
+#ifdef NKRO_ENABLE
+    if (keyboard_nkro) {
+        Endpoint_SelectEndpoint(NKRO_IN_EPNUM);
+
+        /* Check if write ready for a polling interval around 1ms */
+        while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(4);
+        if (!Endpoint_IsReadWriteAllowed()) return;
+    }
+    else
+#endif
+    {
+        Endpoint_SelectEndpoint(KEYBOARD_IN_EPNUM);
 
-    /* Check if Keyboard Endpoint Ready for Read/Write */
-    while (--timeout && !Endpoint_IsReadWriteAllowed()) ;
+        /* Check if write ready for a polling interval around 10ms */
+        while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
+        if (!Endpoint_IsReadWriteAllowed()) return;
+    }
 
     /* Write Keyboard Report Data */
-    Endpoint_Write_Stream_LE(report, sizeof(report_keyboard_t), NULL);
+#ifdef NKRO_ENABLE
+    if (keyboard_nkro) {
+        Endpoint_Write_Stream_LE(report, NKRO_EPSIZE, NULL);
+    }
+    else
+#endif
+    {
+        /* boot mode */
+        Endpoint_Write_Stream_LE(report, KEYBOARD_EPSIZE, NULL);
+    }
 
     /* Finalize the stream transfer to send the last packet */
     Endpoint_ClearIN();
@@ -366,13 +387,17 @@ static void send_keyboard(report_keyboard_t *report)
 static void send_mouse(report_mouse_t *report)
 {
 #ifdef MOUSE_ENABLE
-    uint8_t timeout = 0;
+    uint8_t timeout = 255;
+
+    if (USB_DeviceState != DEVICE_STATE_Configured)
+        return;
 
     /* Select the Mouse Report Endpoint */
     Endpoint_SelectEndpoint(MOUSE_IN_EPNUM);
 
-    /* Check if Mouse Endpoint Ready for Read/Write */
-    while (--timeout && !Endpoint_IsReadWriteAllowed()) ;
+    /* Check if write ready for a polling interval around 10ms */
+    while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
+    if (!Endpoint_IsReadWriteAllowed()) return;
 
     /* Write Mouse Report Data */
     Endpoint_Write_Stream_LE(report, sizeof(report_mouse_t), NULL);
@@ -384,28 +409,42 @@ static void send_mouse(report_mouse_t *report)
 
 static void send_system(uint16_t data)
 {
-    uint8_t timeout = 0;
+    uint8_t timeout = 255;
+
+    if (USB_DeviceState != DEVICE_STATE_Configured)
+        return;
 
     report_extra_t r = {
         .report_id = REPORT_ID_SYSTEM,
         .usage = data
     };
     Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
-    while (--timeout && !Endpoint_IsReadWriteAllowed()) ;
+
+    /* Check if write ready for a polling interval around 10ms */
+    while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
+    if (!Endpoint_IsReadWriteAllowed()) return;
+
     Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
     Endpoint_ClearIN();
 }
 
 static void send_consumer(uint16_t data)
 {
-    uint8_t timeout = 0;
+    uint8_t timeout = 255;
+
+    if (USB_DeviceState != DEVICE_STATE_Configured)
+        return;
 
     report_extra_t r = {
         .report_id = REPORT_ID_CONSUMER,
         .usage = data
     };
     Endpoint_SelectEndpoint(EXTRAKEY_IN_EPNUM);
-    while (--timeout && !Endpoint_IsReadWriteAllowed()) ;
+
+    /* Check if write ready for a polling interval around 10ms */
+    while (timeout-- && !Endpoint_IsReadWriteAllowed()) _delay_us(40);
+    if (!Endpoint_IsReadWriteAllowed()) return;
+
     Endpoint_Write_Stream_LE(&r, sizeof(report_extra_t), NULL);
     Endpoint_ClearIN();
 }
@@ -497,19 +536,33 @@ static void SetupHardware(void)
 
     // for Console_Task
     USB_Device_EnableSOFEvents();
+    print_set_sendchar(sendchar);
 }
 
 int main(void)  __attribute__ ((weak));
 int main(void)
 {
     SetupHardware();
+    sei();
+
+    /* wait for USB startup & debug output */
+    while (USB_DeviceState != DEVICE_STATE_Configured) {
+#if defined(INTERRUPT_CONTROL_ENDPOINT)
+        ;
+#else
+        USB_USBTask();
+#endif
+    }
+    print("USB configured.\n");
+
+    /* init modules */
     keyboard_init();
     host_set_driver(&lufa_driver);
 #ifdef SLEEP_LED_ENABLE
     sleep_led_init();
 #endif
-    sei();
 
+    print("Keyboard start.\n");
     while (1) {
         while (USB_DeviceState == DEVICE_STATE_Suspended) {
             suspend_power_down();