X-Git-Url: https://git.friedersdorff.com/?a=blobdiff_plain;f=tmk.c;h=f7042bd6fbe2754267d8d48e0c41c72f4c7be1b1;hb=37ced39ae2ecfc945c21526faffb2449577bbeb7;hp=c01972514d36527a98a450c251503ca94c3e9ffd;hpb=54b5bafaacf0d7863b7bdb84dd69cbc80db77956;p=max%2Ftmk_keyboard.git

diff --git a/tmk.c b/tmk.c
index c0197251..f7042bd6 100644
--- a/tmk.c
+++ b/tmk.c
@@ -24,36 +24,35 @@
  * THE SOFTWARE.
  */
 
-// TODO: clean unused headers
 #include <stdbool.h>
 #include <avr/io.h>
-#include <avr/pgmspace.h>
 #include <avr/interrupt.h>
 #include <util/delay.h>
 #include "usb.h"
-#include "usb_keyboard.h"
-#include "usb_mouse.h"
+#include "matrix_skel.h"
+#include "key_process.h"
 #include "print.h"
-#include "matrix.h"
-#include "keymap.h"
+#include "debug.h"
+#include "util.h"
+#include "controller.h"
+#include "timer.h"
 #include "jump_bootloader.h"
 
-#include "key_process.h"
 
 #define CPU_PRESCALE(n)    (CLKPR = 0x80, CLKPR = (n))
 
-// TODO: should go to hardware dependent file
-// for Teensy/Teensy++ 2.0
-#define LED_CONFIG    (DDRD |= (1<<6))
-#define LED_ON        (PORTD |= (1<<6))
-#define LED_OFF       (PORTD &= ~(1<<6))
 
-
-uint16_t idle_count=0;
+bool debug_enable = false;
+bool debug_matrix = false;
+bool debug_keyboard = false;
+bool debug_mouse = false;
 
 
 int main(void)
 {
+    DEBUG_LED_CONFIG;
+    DEBUG_LED_OFF;
+
     // set for 16 MHz clock
     CPU_PRESCALE(0);
 
@@ -63,41 +62,31 @@ int main(void)
     usb_init();
     while (!usb_configured()) /* wait */ ;
 
-    // Wait an extra second for the PC's operating system to load drivers
-    // and do whatever it does to actually be ready for input
-    // needs such long time in my PC.
-    /* wait for debug print. no need for normal use */
-    for (int i =0; i < 6; i++) {
-        LED_CONFIG;
-        LED_ON;
-        _delay_ms(500);
-        LED_OFF;
-        _delay_ms(500);
-    }
-
-    // Configure timer 0 to generate a timer overflow interrupt every
-    // 256*1024 clock cycles, or approx 61 Hz when using 16 MHz clock
-    // This demonstrates how to use interrupts to implement a simple
-    // inactivity timeout.
-    TCCR0A = 0x00;
-    TCCR0B = 0x05;
-    TIMSK0 = (1<<TOIE0);
-
+    timer_init();
 
     matrix_init();
-    print("\nt.m.k. keyboard 1.2\n");
+    matrix_scan();
+    // bootloader comes up when any 4 or more keys are pressed at startup
+    if (matrix_key_count() >= 4) {
+#ifdef DEBUG_LED
+        for (int i = 0; i < 6; i++) {
+            DEBUG_LED_CONFIG;
+            DEBUG_LED_ON;
+            _delay_ms(500);
+            DEBUG_LED_OFF;
+            _delay_ms(500);
+        }
+#else
+        _delay_ms(5000);
+#endif
+        print_enable = true;
+        print("jump to bootloader...\n");
+        _delay_ms(1000);
+        jump_bootloader(); // not return
+    }
+
     while (1) {
        proc_matrix(); 
         _delay_ms(2);
     }
 }
-
-
-// This interrupt routine is run approx 61 times per second.
-// A very simple inactivity timeout is implemented, where we
-// will send a space character and print a message to the
-// hid_listen debug message window.
-ISR(TIMER0_OVF_vect)
-{
-    idle_count++;
-}