hhkb: Add Makefile.jp for HHKB JP

diff --git a/keyboard/hhkb/Makefile b/keyboard/hhkb/Makefile
index 5cf02d194ec05c9a87d2324f3818dfce5491feef..dc5c06a948193f92afb1a04dcce9dc7ad25782c8 100644 (file)
--- a/keyboard/hhkb/Makefile
+++ b/keyboard/hhkb/Makefile
@@ -121,11 +121,6 @@ NKRO_ENABLE = yes          # USB Nkey Rollover
 #HHKB_JP = yes                 # HHKB JP support
 
 
-ifdef HHKB_JP
-    OPT_DEFS += -DHHKB_JP
-endif
-
-
 #
 # Keymap file
 #
@@ -140,6 +135,11 @@ else
 endif
 
 
+ifneq (, $(or $(findstring keymap_jp.c, $(SRC)), $(findstring yes, $(HHKB_JP))))
+    OPT_DEFS += -DHHKB_JP
+endif
+
+
 # Search Path
 VPATH += $(TARGET_DIR)
 VPATH += $(TOP_DIR)

diff --git a/keyboard/hhkb/Makefile.jp b/keyboard/hhkb/Makefile.jp
new file mode 100644 (file)
index 0000000..e04dbb2
--- /dev/null
+++ b/keyboard/hhkb/Makefile.jp
@@ -0,0 +1,2 @@
+HHKB_JP = yes
+include Makefile

diff --git a/keyboard/hhkb/README.md b/keyboard/hhkb/README.md
index d4a2cd0223959846a0d54a6f08f8c3980cdeb90b..f9fd1650766866eef21737275c00c04ee5c23221 100644 (file)
--- a/keyboard/hhkb/README.md
+++ b/keyboard/hhkb/README.md
@@ -43,12 +43,15 @@ See [doc/HHKB.txt](doc/HHKB.txt) and files under [doc/](doc/) for internal of HH
 See [this document](../../doc/build.md) first.
 
 ### Configuration
-Set `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`. If your target is **HHKB JP** you need to set `HHKB_JP` build option in `Makefile`.
+If your target is **HHKB JP** you need to set `HHKB_JP` build option in `Makefile` or use `Makefile.jp` instead of `Makefile`.
+
+If you use other than **TMK Alt Controller Board** set proper `MCU`, `BOOTLOADER_SIZE` and other build options in `Makefile` and `config.h`. At least PJRC Teensy requires changing `BOOTLOADER_SIZE` to 512.
 
 ### Build 
 Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. Just `make` with `KEYMAP` option like:
 
     $ make KEYMAP=[hasu|hhkb|spacefn|<name>]
+    $ make -f Makefile.jp KEYMAP=[jp|<name>]        # for HHKB JP
 
 
 ### Program
@@ -57,10 +60,12 @@ First, push reset button on board to start bootloader.
 This command programs the controller with [dfu-programmer] if the tool is installed and configured properly.
 
     $ make dfu
+    $ make -f Makefile.jp dfu       # for HHKB JP
 
 Or you can also use [FLIP] command to program. Also the tool should be installed and configured properly. FLIP GUI application is also available.
 
     $ make flip
+    $ make -f Makefile.jp flip      # for HHKB JP
 
 Use [Teensy Loader] if your controller is Teensy/Teensy++.