--- /dev/null
- TMK Keyboard Firmware Collection
- ================================
- This is a keyboard firmware with some useful features for Atmel AVR controller.
++TMK Keyboard Firmware Core Library
++==================================
++This is a keyboard firmware library with some useful features for Atmel AVR and Cortex-M.
+
- Source code is available here: <http://github.com/tmk/tmk_keyboard>
++Source code is available here: <https://github.com/tmk/tmk_keyboard/tree/core>
+
+
+Features
+--------
+These features can be used in your keyboard.
+
+* Multi-layer Keymap - Multiple keyboard layouts with layer switching
+* Mouse key - Mouse control with keyboard
+* System Control Key - Power Down, Sleep, Wake Up and USB Remote Wake up
+* Media Control Key - Volume Down/Up, Mute, Next/Prev track, Play, Stop and etc
+* USB NKRO - 120 keys(+ 8 modifiers) simultaneously
+* PS/2 mouse support - PS/2 mouse(TrackPoint) as composite device
+* Keyboard protocols - PS/2, ADB, M0110, Sun and other old keyboard protocols
+* User Function - Customizable function of key with writing code
+* Macro - Very primitive at this time
+* Keyboard Tricks - Oneshot modifier and modifier with tapping feature
+* Debug Console - Messages for debug and interaction with firmware
+* Virtual DIP Switch - Configurations stored EEPROM(Boot Magic)
+* Locking CapsLock - Mechanical switch support for CapsLock
+* Breathing Sleep LED - Sleep indicator with charm during USB suspend
+* Backlight - Control backlight levels
+
+
- Projects
- --------
- You can find some keyboard specific projects under `converter` and `keyboard` directory.
-
- ### converter
- * [ps2_usb](converter/ps2_usb/) - [PS/2 keyboard to USB][GH_ps2]
- * [adb_usb](converter/adb_usb/) - [ADB keyboard to USB][GH_adb]
- * [m0110_usb](converter/m0110_usb) - [Macintosh 128K/512K/Plus keyboard to USB][GH_m0110]
- * [terminal_usb](converter/terminal_usb/) - [IBM Model M terminal keyboard(PS/2 scancode set3) to USB][GH_terminal]
- * [news_usb](converter/news_usb/) - [Sony NEWS keyboard to USB][GH_news]
- * [x68k_usb](converter/x68k_usb/) - [Sharp X68000 keyboard to USB][GH_x68k]
- * [sun_usb](converter/sun_usb/) - [Sun] to USB(type4, 5 and 3?)
- * [pc98_usb](converter/pc98_usb/) - [PC98] to USB
- * [usb_usb](converter/usb_usb/) - USB to USB(experimental)
- * [ascii_usb](converter/ascii_usb/) - ASCII(Serial console terminal) to USB
- * [ibm4704_usb](converter/ibm4704_usb) - [IBM 4704 keyboard Converter][GH_ibm4704]
-
- ### keyboard
- * [hhkb](keyboard/hhkb/) - [Happy Hacking Keyboard pro][GH_hhkb] **my main board**
- * [gh60](keyboard/gh60/) - [GH60] DIY 60% keyboard [prototype][GH60_proto] **my second board**
- * [hbkb](keyboard/hbkb/) - [Happy Buckling spring keyboard][GH_hbkb](IBM Model M 60% mod)
- * [hid_liber](keyboard/hid_liber/) - [HID liberation][HID_liber] controller (by alaricljs)
- * [phantom](keyboard/phantom/) - [Phantom] keyboard (by Tranquilite)
- * [IIgs_Standard](keyboard/IIgs/) - Apple [IIGS] keyboard mod(by JeffreySung)
- * [macway](keyboard/macway/) - [Compact keyboard mod][GH_macway] [retired]
- * [KMAC](keyboard/kmac/) - Korean custom keyboard
- * [Lightsaber](keyboard/lightsaber/) - Korean custom keyboard
- * [Infinity](keyboard/infinity/) - Massdrop [Infinity keyboard][Infinity]
- * [NerD](keyboard/nerd/) - Korean custom keyboard
- * [KittenPaw](keyboard/kitten_paw) - Custom Majestouch controller
- * [Lightpad](keyboard/lightpad) - Korean custom keypad
- * [ghost_squid](keyboard/ghost_squid/) - [The Ghost Squid][ghost_squid] controller for [Cooler Master QuickFire XT][cmxt]
-
- ### Extenal projects using tmk_keyboard
- * [ErgoDox_cub-uanic][cub-uanic] - Split Ergonomic Keyboard [ErgoDox][ergodox_org]
- * [mcdox][mcdox_tmk] - [mcdox][mcdox]
-
-
- [GH_macway]: http://geekhack.org/showwiki.php?title=Island:11930
- [GH_hhkb]: http://geekhack.org/showwiki.php?title=Island:12047
- [GH_ps2]: http://geekhack.org/showwiki.php?title=Island:14618
- [GH_adb]: http://geekhack.org/showwiki.php?title=Island:14290
- [GH_hhkb_bt]: http://geekhack.org/showwiki.php?title=Island:20851
- [GH_m0110]: http://geekhack.org/showwiki.php?title=Island:24965
- [GH_news]: http://geekhack.org/showwiki.php?title=Island:25759
- [GH_terminal]: http://geekhack.org/showwiki.php?title=Island:27272
- [GH_x68k]: http://geekhack.org/showwiki.php?title=Island:29060
- [GH_hbkb]: http://geekhack.org/showwiki.php?title=Island:29483
- [GH_ibm4704]: http://geekhack.org/index.php?topic=54706.0
- [HID_liber]: http://deskthority.net/wiki/HID_Liberation_Device_-_DIY_Instructions
- [Phantom]: http://geekhack.org/index.php?topic=26742
- [GH60]: http://geekhack.org/index.php?topic=34959
- [GH60_proto]: http://geekhack.org/index.php?topic=37570.0
- [PC98]: http://en.wikipedia.org/wiki/NEC_PC-9801
- [Sun]: http://en.wikipedia.org/wiki/Sun-3
- [IIGS]: http://en.wikipedia.org/wiki/Apple_IIGS
- [Infinity]: https://www.massdrop.com/buy/infinity-keyboard-kit
- [ghost_squid]: http://deskthority.net/wiki/Costar_replacement_controllers#The_Ghost_Squid
- [cmxt]: http://gaming.coolermaster.com/en/products/keyboards/quickfirext/
- [ergodox_org]: http://ergodox.org/
- [cub-uanic]: https://github.com/cub-uanic/tmk_keyboard/tree/master/keyboard/ergodox
- [mcdox]: https://github.com/DavidMcEwan/mcdox
- [mcdox_tmk]: https://github.com/DavidMcEwan/tmk_keyboard/tree/master/keyboard/mcdox
++
++Updates
++-------
++2015/04/22 separated with TMK Keyboard Firmware Collection
++
++
++
++TMK Keyboard Firmware Collection
++--------------------------------
++Complete firmwares for various keyboards and protocol converters.
++
++<https://github.com/tmk/tmk_keyboard>
+
+
+
+License
+-------
+**GPLv2** or later. Some protocol files are under **Modified BSD License**.
+LUFA, PJRC and V-USB stack have their own license respectively.
+
+
+
+Build Firmware and Program Controller
+-------------------------------------
+See [doc/build.md](doc/build.md).
+
+
+
- Change your keymap
- ------------------
- See [doc/keymap.md](doc/keymap.md).
-
-
-
- Magic Commands
- --------------
- To see help press `Magic` + `H`.
-
- `Magic` key bind may be `LShift` + `RShift` in many project, but `Power` key on ADB converter. `Magic` keybind can be vary on each project, check `config.h` in project directory.
-
- Following commands can be also executed with `Magic` + key. In console mode `Magic` keybind is not needed.
-
- ----- Command Help -----
- c: enter console mode
- d: toggle debug enable
- x: toggle matrix debug
- k: toggle keyboard debug
- m: toggle mouse debug
- v: print device version & info
- t: print timer count
- s: print status
- e: print eeprom config
- n: toggle NKRO
- 0/F10: switch to Layer0
- 1/F1: switch to Layer1
- 2/F2: switch to Layer2
- 3/F3: switch to Layer3
- 4/F4: switch to Layer4
- PScr: power down/remote wake-up
- Caps: Lock Keyboard(Child Proof)
- Paus: jump to bootloader
-
- **TBD**
-
- ### Boot Magic Configuration - Virtual DIP Switch
- Boot Magic are executed during boot up time. Press Magic key below then plug in keyboard cable.
- Note that you must use keys of **Layer 0** as Magic keys. These settings are stored in EEPROM so that retain your configure over power cycles.
-
- To avoid configuring accidentally additive salt key `KC_SPACE` also needs to be pressed along with the following configuration keys. The salt key is configurable in `config.h`. See [common/bootmagic.h](common/bootmagic.h).
-
- #### General
- - Skip reading EEPROM to start with default configuration(`ESC`)
- - Clear configuration stored in EEPROM to reset configuration(`Backspace`)
-
- #### Bootloader
- - Kick up Bootloader(`B`)
-
- #### Debug
- - Debug enable(`D`)
- - Debug matrix enable(`D`+`X`)
- - Debug keyboard enable(`D`+`K`)
- - Debug mouse enable(`D`+`M`)
-
- #### Keymap
- - Swap Control and CapsLock(`Left Control`)
- - Change CapsLock to Control(`Caps Lock`)
- - Swap LeftAlt and Gui(`Left Alt`)
- - Swap RightAlt and Gui(`Right Alt`)
- - Disable Gui(`Left Gui`)
- - Swap Grave and Escape(`Grave`)
- - Swap BackSlash and BackSpace(`Back Slash`)
- - Enable NKRO on boot(`N`)
-
- #### Default Layer
- - Set Default Layer to 0(`0`)
- - Set Default Layer to 1(`1`)
- - Set Default Layer to 2(`2`)
- - Set Default Layer to 3(`3`)
- - Set Default Layer to 4(`4`)
- - Set Default Layer to 5(`5`)
- - Set Default Layer to 6(`6`)
- - Set Default Layer to 7(`7`)
-
- #### Caution
- Unintentional use of this feature will cause user confusion.
-
- TODO: Magic key combination to avoid unintentional press during plug in
-
- **TBD**
-
-
- Mechanical Locking support
- --------------------------
- This feature makes it possible for you to use mechanical switch for `CapsLock`, `NumLock` or `ScrollLock`. To enable this feature define these macros in `config.h` and use `KC_LCAP`, `KC_LNUM` or `KC_LSCR` in keymap for locking key instead of normal `KC_CAPS`, `KC_NLCK` or `KC_SLCK`. Resync option tries to keep lock switch state consistent with keyboard LED state.
-
- #define LOCKING_SUPPORT_ENABLE
- #define LOCKING_RESYNC_ENABLE
-
-
+Start Your Own Project
+-----------------------
+**TBD**
+### Config.h Options
+#### 1. USB vendor/product ID and device description
+ #define VENDOR_ID 0xFEED
+ #define PRODUCT_ID 0xBEEF
+ #define MANUFACTURER t.m.k.
+ #define PRODUCT Macway mod
+ #define DESCRIPTION t.m.k. keyboard firmware for Macway mod
+
+#### 2. Keyboard matrix configuration
+ #define MATRIX_ROWS 8
+ #define MATRIX_COLS 8
+ #define MATRIX_HAS_GHOST
+
+
+
+Architecture
+------------
+ Architecture Diagram
+ +---------------+---------------+-------------+
+ | Host | Keyboard | Matrix, LED |
+ ___________ |-----------+-+ +-------------+ | +-----------|
+ / /| Keys/Mouse | Protocol |d| | Action | | | Protocol |
+ /__________/ |<-----------| LUFA |r| | Layer, Tap | | | Matrix |
+ |.--------.| | LED | V-USB |i| |-------------| | | PS/2,IBM | __________________
+ || || |----------->| PJRC |v| | Keymap | | | ADB,M0110| Keys / /_/_/_/_/_/_/_/ /|
+ || Host || | Console | iWRAP(BT)|e| | Mousekey | | | SUN/NEWS |<----------/ /_/_/_/_/_/_/_/ / /
+ ||________||/.<-----------| UART |r| | Report | | | X68K/PC98| Control / /_/_/_/_/_/_/_/ / /
+ `_========_'/| |---------------------------------------------|-------->/___ /_______/ ___/ /
+ |_o______o_|/ | Sendchar, Print, Debug, Command, ... | |_________________|/
+ +---------------------------------------------+ Keyboard
+
+
+
+Debugging
+--------
+Use PJRC's `hid_listen` to see debug messages. You can use the tool for debug even if firmware use LUFA stack.
+
+You can use xprintf() to display debug info on `hid_listen`, see `common/xprintf.h`.
+
+
+
+Files and Directories
+-------------------
+### Top
+* common/ - common codes
+* protocol/ - keyboard protocol support
- * keyboard/ - keyboard projects
- * converter/ - protocol converter projects
+* doc/ - documents
+* common.mk - Makefile for common
+* protocol.mk - Makefile for protocol
+* rules.mk - Makefile for build rules
+
+### Common
+* host.h
+* host_driver.h
+* keyboard.h
+* command.h
+* keymap.h
+* action.h
+* keycode.h
+* matrix.h
+* led.h
+* mousekey.h
+* report.h
+* debug.h
+* print.h
+* bootloader.h
+* sendchar.h
+* timer.h
+* util.h
+
+### Keyboard Protocols
+* lufa/ - LUFA USB stack
+* pjrc/ - PJRC USB stack
+* vusb/ - Objective Development V-USB
+* iwrap/ - Bluetooth HID for Bluegiga iWRAP
+* ps2.c - PS/2 protocol
+* adb.c - Apple Desktop Bus protocol
+* m0110.c - Macintosh 128K/512K/Plus keyboard protocol
+* news.c - Sony NEWS keyboard protocol
+* x68k.c - Sharp X68000 keyboard protocol
+* serial_soft.c - Asynchronous Serial protocol implemented by software
+
+
+
+Coding Style
+-------------
+- Doesn't use Tab to indent, use 4-spaces instead.
-
-
-
- Other Keyboard Firmware Projects
- ------------------
- You can learn a lot about keyboard firmware from these. See [doc/other_projects.md](doc/other_projects.md).
projects / max / tmk_keyboard.git / commitdiff