-/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/chconf.h
- * @brief Configuration file template.
- * @details A copy of this file must be placed in each project directory, it
- * contains the application specific kernel settings.
- *
- * @addtogroup config
- * @details Kernel related settings and hooks.
- * @{
- */
-
-#ifndef CHCONF_H
-#define CHCONF_H
-
-#define _CHIBIOS_RT_CONF_
-
-/*===========================================================================*/
-/**
- * @name System timers settings
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief System time counter resolution.
- * @note Allowed values are 16 or 32 bits.
- */
-#define CH_CFG_ST_RESOLUTION 16
-
-/**
- * @brief System tick frequency.
- * @details Frequency of the system timer that drives the system ticks. This
- * setting also defines the system tick time unit.
- */
-#define CH_CFG_ST_FREQUENCY 2000
-
-/**
- * @brief Time delta constant for the tick-less mode.
- * @note If this value is zero then the system uses the classic
- * periodic tick. This value represents the minimum number
- * of ticks that is safe to specify in a timeout directive.
- * The value one is not valid, timeouts are rounded up to
- * this value.
- */
-#define CH_CFG_ST_TIMEDELTA 2
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel parameters and options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Round robin interval.
- * @details This constant is the number of system ticks allowed for the
- * threads before preemption occurs. Setting this value to zero
- * disables the preemption for threads with equal priority and the
- * round robin becomes cooperative. Note that higher priority
- * threads can still preempt, the kernel is always preemptive.
- * @note Disabling the round robin preemption makes the kernel more compact
- * and generally faster.
- * @note The round robin preemption is not supported in tickless mode and
- * must be set to zero in that case.
- */
-#define CH_CFG_TIME_QUANTUM 0
-
-/**
- * @brief Managed RAM size.
- * @details Size of the RAM area to be managed by the OS. If set to zero
- * then the whole available RAM is used. The core memory is made
- * available to the heap allocator and/or can be used directly through
- * the simplified core memory allocator.
- *
- * @note In order to let the OS manage the whole RAM the linker script must
- * provide the @p __heap_base__ and @p __heap_end__ symbols.
- * @note Requires @p CH_CFG_USE_MEMCORE.
- */
-#define CH_CFG_MEMCORE_SIZE 0
-
-/**
- * @brief Idle thread automatic spawn suppression.
- * @details When this option is activated the function @p chSysInit()
- * does not spawn the idle thread. The application @p main()
- * function becomes the idle thread and must implement an
- * infinite loop.
- */
-#define CH_CFG_NO_IDLE_THREAD FALSE
-
-/* Use __WFI in the idle thread for waiting. Does lower the power
- * consumption. */
-#define CORTEX_ENABLE_WFI_IDLE TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Performance options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief OS optimization.
- * @details If enabled then time efficient rather than space efficient code
- * is used when two possible implementations exist.
- *
- * @note This is not related to the compiler optimization options.
- * @note The default is @p TRUE.
- */
-#define CH_CFG_OPTIMIZE_SPEED TRUE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Subsystem options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Time Measurement APIs.
- * @details If enabled then the time measurement APIs are included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_TM FALSE
-
-/**
- * @brief Threads registry APIs.
- * @details If enabled then the registry APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_REGISTRY TRUE
-
-/**
- * @brief Threads synchronization APIs.
- * @details If enabled then the @p chThdWait() function is included in
- * the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_WAITEXIT TRUE
-
-/**
- * @brief Semaphores APIs.
- * @details If enabled then the Semaphores APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_SEMAPHORES TRUE
-
-/**
- * @brief Semaphores queuing mode.
- * @details If enabled then the threads are enqueued on semaphores by
- * priority rather than in FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE
-
-/**
- * @brief Mutexes APIs.
- * @details If enabled then the mutexes APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MUTEXES TRUE
-
-/**
- * @brief Enables recursive behavior on mutexes.
- * @note Recursive mutexes are heavier and have an increased
- * memory footprint.
- *
- * @note The default is @p FALSE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE
-
-/**
- * @brief Conditional Variables APIs.
- * @details If enabled then the conditional variables APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MUTEXES.
- */
-#define CH_CFG_USE_CONDVARS TRUE
-
-/**
- * @brief Conditional Variables APIs with timeout.
- * @details If enabled then the conditional variables APIs with timeout
- * specification are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_CONDVARS.
- */
-#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE
-
-/**
- * @brief Events Flags APIs.
- * @details If enabled then the event flags APIs are included in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_EVENTS TRUE
-
-/**
- * @brief Events Flags APIs with timeout.
- * @details If enabled then the events APIs with timeout specification
- * are included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_EVENTS.
- */
-#define CH_CFG_USE_EVENTS_TIMEOUT TRUE
-
-/**
- * @brief Synchronous Messages APIs.
- * @details If enabled then the synchronous messages APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MESSAGES TRUE
-
-/**
- * @brief Synchronous Messages queuing mode.
- * @details If enabled then messages are served by priority rather than in
- * FIFO order.
- *
- * @note The default is @p FALSE. Enable this if you have special
- * requirements.
- * @note Requires @p CH_CFG_USE_MESSAGES.
- */
-#define CH_CFG_USE_MESSAGES_PRIORITY FALSE
-
-/**
- * @brief Mailboxes APIs.
- * @details If enabled then the asynchronous messages (mailboxes) APIs are
- * included in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_SEMAPHORES.
- */
-#define CH_CFG_USE_MAILBOXES TRUE
-
-/**
- * @brief Core Memory Manager APIs.
- * @details If enabled then the core memory manager APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMCORE TRUE
-
-/**
- * @brief Heap Allocator APIs.
- * @details If enabled then the memory heap allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or
- * @p CH_CFG_USE_SEMAPHORES.
- * @note Mutexes are recommended.
- */
-#define CH_CFG_USE_HEAP TRUE
-
-/**
- * @brief Memory Pools Allocator APIs.
- * @details If enabled then the memory pools allocator APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- */
-#define CH_CFG_USE_MEMPOOLS FALSE
-
-/**
- * @brief Dynamic Threads APIs.
- * @details If enabled then the dynamic threads creation APIs are included
- * in the kernel.
- *
- * @note The default is @p TRUE.
- * @note Requires @p CH_CFG_USE_WAITEXIT.
- * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.
- */
-#define CH_CFG_USE_DYNAMIC FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Debug options
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Debug option, kernel statistics.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_STATISTICS FALSE
-
-/**
- * @brief Debug option, system state check.
- * @details If enabled the correct call protocol for system APIs is checked
- * at runtime.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_SYSTEM_STATE_CHECK FALSE
-
-/**
- * @brief Debug option, parameters checks.
- * @details If enabled then the checks on the API functions input
- * parameters are activated.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_CHECKS FALSE
-
-/**
- * @brief Debug option, consistency checks.
- * @details If enabled then all the assertions in the kernel code are
- * activated. This includes consistency checks inside the kernel,
- * runtime anomalies and port-defined checks.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_ENABLE_ASSERTS FALSE
-
-/**
- * @brief Debug option, trace buffer.
- * @details If enabled then the trace buffer is activated.
- *
- * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED
-
-/**
- * @brief Trace buffer entries.
- * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is
- * different from @p CH_DBG_TRACE_MASK_DISABLED.
- */
-#define CH_DBG_TRACE_BUFFER_SIZE 128
-
-/**
- * @brief Debug option, stack checks.
- * @details If enabled then a runtime stack check is performed.
- *
- * @note The default is @p FALSE.
- * @note The stack check is performed in a architecture/port dependent way.
- * It may not be implemented or some ports.
- * @note The default failure mode is to halt the system with the global
- * @p panic_msg variable set to @p NULL.
- */
-#define CH_DBG_ENABLE_STACK_CHECK FALSE
-
-/**
- * @brief Debug option, stacks initialization.
- * @details If enabled then the threads working area is filled with a byte
- * value when a thread is created. This can be useful for the
- * runtime measurement of the used stack.
- *
- * @note The default is @p FALSE.
- */
-#define CH_DBG_FILL_THREADS FALSE
-
-/**
- * @brief Debug option, threads profiling.
- * @details If enabled then a field is added to the @p thread_t structure that
- * counts the system ticks occurred while executing the thread.
- *
- * @note The default is @p FALSE.
- * @note This debug option is not currently compatible with the
- * tickless mode.
- */
-#define CH_DBG_THREADS_PROFILING FALSE
-
-/** @} */
-
-/*===========================================================================*/
-/**
- * @name Kernel hooks
- * @{
- */
-/*===========================================================================*/
-
-/**
- * @brief Threads descriptor structure extension.
- * @details User fields added to the end of the @p thread_t structure.
- */
-#define CH_CFG_THREAD_EXTRA_FIELDS \
- /* Add threads custom fields here.*/
-
-/**
- * @brief Threads initialization hook.
- * @details User initialization code added to the @p chThdInit() API.
- *
- * @note It is invoked from within @p chThdInit() and implicitly from all
- * the threads creation APIs.
- */
-#define CH_CFG_THREAD_INIT_HOOK(tp) { \
- /* Add threads initialization code here.*/ \
-}
-
-/**
- * @brief Threads finalization hook.
- * @details User finalization code added to the @p chThdExit() API.
- */
-#define CH_CFG_THREAD_EXIT_HOOK(tp) { \
- /* Add threads finalization code here.*/ \
-}
-
-/**
- * @brief Context switch hook.
- * @details This hook is invoked just before switching between threads.
- */
-#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \
- /* Context switch code here.*/ \
-}
-
-/**
- * @brief ISR enter hook.
- */
-#define CH_CFG_IRQ_PROLOGUE_HOOK() { \
- /* IRQ prologue code here.*/ \
-}
-
-/**
- * @brief ISR exit hook.
- */
-#define CH_CFG_IRQ_EPILOGUE_HOOK() { \
- /* IRQ epilogue code here.*/ \
-}
-
-/**
- * @brief Idle thread enter hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to activate a power saving mode.
- */
-#define CH_CFG_IDLE_ENTER_HOOK() { \
- /* Idle-enter code here.*/ \
-}
-
-/**
- * @brief Idle thread leave hook.
- * @note This hook is invoked within a critical zone, no OS functions
- * should be invoked from here.
- * @note This macro can be used to deactivate a power saving mode.
- */
-#define CH_CFG_IDLE_LEAVE_HOOK() { \
- /* Idle-leave code here.*/ \
-}
-
-/**
- * @brief Idle Loop hook.
- * @details This hook is continuously invoked by the idle thread loop.
- */
-#define CH_CFG_IDLE_LOOP_HOOK() { \
- /* Idle loop code here.*/ \
-}
-
-/**
- * @brief System tick event hook.
- * @details This hook is invoked in the system tick handler immediately
- * after processing the virtual timers queue.
- */
-#define CH_CFG_SYSTEM_TICK_HOOK() { \
- /* System tick event code here.*/ \
-}
-
-/**
- * @brief System halt hook.
- * @details This hook is invoked in case to a system halting error before
- * the system is halted.
- */
-#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \
- /* System halt code here.*/ \
-}
-
-/**
- * @brief Trace hook.
- * @details This hook is invoked each time a new record is written in the
- * trace buffer.
- */
-#define CH_CFG_TRACE_HOOK(tep) { \
- /* Trace code here.*/ \
-}
-
-/** @} */
-
-/*===========================================================================*/
-/* Port-specific settings (override port settings defaulted in chcore.h). */
-/*===========================================================================*/
-
-#endif /* CHCONF_H */
-
-/** @} */
+/*\r
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio\r
+\r
+ Licensed under the Apache License, Version 2.0 (the "License");\r
+ you may not use this file except in compliance with the License.\r
+ You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+ Unless required by applicable law or agreed to in writing, software\r
+ distributed under the License is distributed on an "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+ See the License for the specific language governing permissions and\r
+ limitations under the License.\r
+*/\r
+\r
+/**\r
+ * @file templates/chconf.h\r
+ * @brief Configuration file template.\r
+ * @details A copy of this file must be placed in each project directory, it\r
+ * contains the application specific kernel settings.\r
+ *\r
+ * @addtogroup config\r
+ * @details Kernel related settings and hooks.\r
+ * @{\r
+ */\r
+\r
+#ifndef CHCONF_H\r
+#define CHCONF_H\r
+\r
+#define _CHIBIOS_RT_CONF_\r
+#define _CHIBIOS_RT_CONF_VER_6_0_\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name System timers settings\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief System time counter resolution.\r
+ * @note Allowed values are 16 or 32 bits.\r
+ */\r
+#if !defined(CH_CFG_ST_RESOLUTION)\r
+#define CH_CFG_ST_RESOLUTION 16\r
+#endif\r
+\r
+/**\r
+ * @brief System tick frequency.\r
+ * @details Frequency of the system timer that drives the system ticks. This\r
+ * setting also defines the system tick time unit.\r
+ */\r
+#if !defined(CH_CFG_ST_FREQUENCY)\r
+#define CH_CFG_ST_FREQUENCY 2000\r
+#endif\r
+\r
+/**\r
+ * @brief Time intervals data size.\r
+ * @note Allowed values are 16, 32 or 64 bits.\r
+ */\r
+#if !defined(CH_CFG_INTERVALS_SIZE)\r
+#define CH_CFG_INTERVALS_SIZE 32\r
+#endif\r
+\r
+/**\r
+ * @brief Time types data size.\r
+ * @note Allowed values are 16 or 32 bits.\r
+ */\r
+#if !defined(CH_CFG_TIME_TYPES_SIZE)\r
+#define CH_CFG_TIME_TYPES_SIZE 32\r
+#endif\r
+\r
+/**\r
+ * @brief Time delta constant for the tick-less mode.\r
+ * @note If this value is zero then the system uses the classic\r
+ * periodic tick. This value represents the minimum number\r
+ * of ticks that is safe to specify in a timeout directive.\r
+ * The value one is not valid, timeouts are rounded up to\r
+ * this value.\r
+ */\r
+#if !defined(CH_CFG_ST_TIMEDELTA)\r
+#define CH_CFG_ST_TIMEDELTA 2\r
+#endif\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name Kernel parameters and options\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Round robin interval.\r
+ * @details This constant is the number of system ticks allowed for the\r
+ * threads before preemption occurs. Setting this value to zero\r
+ * disables the preemption for threads with equal priority and the\r
+ * round robin becomes cooperative. Note that higher priority\r
+ * threads can still preempt, the kernel is always preemptive.\r
+ * @note Disabling the round robin preemption makes the kernel more compact\r
+ * and generally faster.\r
+ * @note The round robin preemption is not supported in tickless mode and\r
+ * must be set to zero in that case.\r
+ */\r
+#if !defined(CH_CFG_TIME_QUANTUM)\r
+#define CH_CFG_TIME_QUANTUM 0\r
+#endif\r
+\r
+/**\r
+ * @brief Managed RAM size.\r
+ * @details Size of the RAM area to be managed by the OS. If set to zero\r
+ * then the whole available RAM is used. The core memory is made\r
+ * available to the heap allocator and/or can be used directly through\r
+ * the simplified core memory allocator.\r
+ *\r
+ * @note In order to let the OS manage the whole RAM the linker script must\r
+ * provide the @p __heap_base__ and @p __heap_end__ symbols.\r
+ * @note Requires @p CH_CFG_USE_MEMCORE.\r
+ */\r
+#if !defined(CH_CFG_MEMCORE_SIZE)\r
+#define CH_CFG_MEMCORE_SIZE 0\r
+#endif\r
+\r
+/**\r
+ * @brief Idle thread automatic spawn suppression.\r
+ * @details When this option is activated the function @p chSysInit()\r
+ * does not spawn the idle thread. The application @p main()\r
+ * function becomes the idle thread and must implement an\r
+ * infinite loop.\r
+ */\r
+#if !defined(CH_CFG_NO_IDLE_THREAD)\r
+#define CH_CFG_NO_IDLE_THREAD FALSE\r
+#endif\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name Performance options\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief OS optimization.\r
+ * @details If enabled then time efficient rather than space efficient code\r
+ * is used when two possible implementations exist.\r
+ *\r
+ * @note This is not related to the compiler optimization options.\r
+ * @note The default is @p TRUE.\r
+ */\r
+#if !defined(CH_CFG_OPTIMIZE_SPEED)\r
+#define CH_CFG_OPTIMIZE_SPEED TRUE\r
+#endif\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name Subsystem options\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Time Measurement APIs.\r
+ * @details If enabled then the time measurement APIs are included in\r
+ * the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#if !defined(CH_CFG_USE_TM)\r
+#define CH_CFG_USE_TM FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Threads registry APIs.\r
+ * @details If enabled then the registry APIs are included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#if !defined(CH_CFG_USE_REGISTRY)\r
+#define CH_CFG_USE_REGISTRY TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Threads synchronization APIs.\r
+ * @details If enabled then the @p chThdWait() function is included in\r
+ * the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#if !defined(CH_CFG_USE_WAITEXIT)\r
+#define CH_CFG_USE_WAITEXIT TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Semaphores APIs.\r
+ * @details If enabled then the Semaphores APIs are included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#if !defined(CH_CFG_USE_SEMAPHORES)\r
+#define CH_CFG_USE_SEMAPHORES TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Semaphores queuing mode.\r
+ * @details If enabled then the threads are enqueued on semaphores by\r
+ * priority rather than in FIFO order.\r
+ *\r
+ * @note The default is @p FALSE. Enable this if you have special\r
+ * requirements.\r
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.\r
+ */\r
+#if !defined(CH_CFG_USE_SEMAPHORES_PRIORITY)\r
+#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Mutexes APIs.\r
+ * @details If enabled then the mutexes APIs are included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#if !defined(CH_CFG_USE_MUTEXES)\r
+#define CH_CFG_USE_MUTEXES TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables recursive behavior on mutexes.\r
+ * @note Recursive mutexes are heavier and have an increased\r
+ * memory footprint.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ * @note Requires @p CH_CFG_USE_MUTEXES.\r
+ */\r
+#if !defined(CH_CFG_USE_MUTEXES_RECURSIVE)\r
+#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Conditional Variables APIs.\r
+ * @details If enabled then the conditional variables APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ * @note Requires @p CH_CFG_USE_MUTEXES.\r
+ */\r
+#if !defined(CH_CFG_USE_CONDVARS)\r
+#define CH_CFG_USE_CONDVARS TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Conditional Variables APIs with timeout.\r
+ * @details If enabled then the conditional variables APIs with timeout\r
+ * specification are included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ * @note Requires @p CH_CFG_USE_CONDVARS.\r
+ */\r
+#if !defined(CH_CFG_USE_CONDVARS_TIMEOUT)\r
+#define CH_CFG_USE_CONDVARS_TIMEOUT FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Events Flags APIs.\r
+ * @details If enabled then the event flags APIs are included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#if !defined(CH_CFG_USE_EVENTS)\r
+#define CH_CFG_USE_EVENTS TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Events Flags APIs with timeout.\r
+ * @details If enabled then the events APIs with timeout specification\r
+ * are included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ * @note Requires @p CH_CFG_USE_EVENTS.\r
+ */\r
+#if !defined(CH_CFG_USE_EVENTS_TIMEOUT)\r
+#define CH_CFG_USE_EVENTS_TIMEOUT TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Synchronous Messages APIs.\r
+ * @details If enabled then the synchronous messages APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#if !defined(CH_CFG_USE_MESSAGES)\r
+#define CH_CFG_USE_MESSAGES TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Synchronous Messages queuing mode.\r
+ * @details If enabled then messages are served by priority rather than in\r
+ * FIFO order.\r
+ *\r
+ * @note The default is @p FALSE. Enable this if you have special\r
+ * requirements.\r
+ * @note Requires @p CH_CFG_USE_MESSAGES.\r
+ */\r
+#if !defined(CH_CFG_USE_MESSAGES_PRIORITY)\r
+#define CH_CFG_USE_MESSAGES_PRIORITY FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Mailboxes APIs.\r
+ * @details If enabled then the asynchronous messages (mailboxes) APIs are\r
+ * included in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ * @note Requires @p CH_CFG_USE_SEMAPHORES.\r
+ */\r
+#if !defined(CH_CFG_USE_MAILBOXES)\r
+#define CH_CFG_USE_MAILBOXES TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Core Memory Manager APIs.\r
+ * @details If enabled then the core memory manager APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#if !defined(CH_CFG_USE_MEMCORE)\r
+#define CH_CFG_USE_MEMCORE TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Heap Allocator APIs.\r
+ * @details If enabled then the memory heap allocator APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or\r
+ * @p CH_CFG_USE_SEMAPHORES.\r
+ * @note Mutexes are recommended.\r
+ */\r
+#if !defined(CH_CFG_USE_HEAP)\r
+#define CH_CFG_USE_HEAP TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Memory Pools Allocator APIs.\r
+ * @details If enabled then the memory pools allocator APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#if !defined(CH_CFG_USE_MEMPOOLS)\r
+#define CH_CFG_USE_MEMPOOLS FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Objects FIFOs APIs.\r
+ * @details If enabled then the objects FIFOs APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#if !defined(CH_CFG_USE_OBJ_FIFOS)\r
+#define CH_CFG_USE_OBJ_FIFOS FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Pipes APIs.\r
+ * @details If enabled then the pipes APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ */\r
+#if !defined(CH_CFG_USE_PIPES)\r
+#define CH_CFG_USE_PIPES FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Dynamic Threads APIs.\r
+ * @details If enabled then the dynamic threads creation APIs are included\r
+ * in the kernel.\r
+ *\r
+ * @note The default is @p TRUE.\r
+ * @note Requires @p CH_CFG_USE_WAITEXIT.\r
+ * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS.\r
+ */\r
+#if !defined(CH_CFG_USE_DYNAMIC)\r
+#define CH_CFG_USE_DYNAMIC FALSE\r
+#endif\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name Objects factory options\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Objects Factory APIs.\r
+ * @details If enabled then the objects factory APIs are included in the\r
+ * kernel.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ */\r
+#if !defined(CH_CFG_USE_FACTORY)\r
+#define CH_CFG_USE_FACTORY FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Maximum length for object names.\r
+ * @details If the specified length is zero then the name is stored by\r
+ * pointer but this could have unintended side effects.\r
+ */\r
+#if !defined(CH_CFG_FACTORY_MAX_NAMES_LENGTH)\r
+#define CH_CFG_FACTORY_MAX_NAMES_LENGTH 8\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the registry of generic objects.\r
+ */\r
+#if !defined(CH_CFG_FACTORY_OBJECTS_REGISTRY)\r
+#define CH_CFG_FACTORY_OBJECTS_REGISTRY FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables factory for generic buffers.\r
+ */\r
+#if !defined(CH_CFG_FACTORY_GENERIC_BUFFERS)\r
+#define CH_CFG_FACTORY_GENERIC_BUFFERS FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables factory for semaphores.\r
+ */\r
+#if !defined(CH_CFG_FACTORY_SEMAPHORES)\r
+#define CH_CFG_FACTORY_SEMAPHORES FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables factory for mailboxes.\r
+ */\r
+#if !defined(CH_CFG_FACTORY_MAILBOXES)\r
+#define CH_CFG_FACTORY_MAILBOXES FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables factory for objects FIFOs.\r
+ */\r
+#if !defined(CH_CFG_FACTORY_OBJ_FIFOS)\r
+#define CH_CFG_FACTORY_OBJ_FIFOS FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables factory for Pipes.\r
+ */\r
+#if !defined(CH_CFG_FACTORY_PIPES) || defined(__DOXYGEN__)\r
+#define CH_CFG_FACTORY_PIPES FALSE\r
+#endif\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name Debug options\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Debug option, kernel statistics.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ */\r
+#if !defined(CH_DBG_STATISTICS)\r
+#define CH_DBG_STATISTICS FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Debug option, system state check.\r
+ * @details If enabled the correct call protocol for system APIs is checked\r
+ * at runtime.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ */\r
+#if !defined(CH_DBG_SYSTEM_STATE_CHECK)\r
+#define CH_DBG_SYSTEM_STATE_CHECK FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Debug option, parameters checks.\r
+ * @details If enabled then the checks on the API functions input\r
+ * parameters are activated.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ */\r
+#if !defined(CH_DBG_ENABLE_CHECKS)\r
+#define CH_DBG_ENABLE_CHECKS FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Debug option, consistency checks.\r
+ * @details If enabled then all the assertions in the kernel code are\r
+ * activated. This includes consistency checks inside the kernel,\r
+ * runtime anomalies and port-defined checks.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ */\r
+#if !defined(CH_DBG_ENABLE_ASSERTS)\r
+#define CH_DBG_ENABLE_ASSERTS FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Debug option, trace buffer.\r
+ * @details If enabled then the trace buffer is activated.\r
+ *\r
+ * @note The default is @p CH_DBG_TRACE_MASK_DISABLED.\r
+ */\r
+#if !defined(CH_DBG_TRACE_MASK)\r
+#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED\r
+#endif\r
+\r
+/**\r
+ * @brief Trace buffer entries.\r
+ * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is\r
+ * different from @p CH_DBG_TRACE_MASK_DISABLED.\r
+ */\r
+#if !defined(CH_DBG_TRACE_BUFFER_SIZE)\r
+#define CH_DBG_TRACE_BUFFER_SIZE 128\r
+#endif\r
+\r
+/**\r
+ * @brief Debug option, stack checks.\r
+ * @details If enabled then a runtime stack check is performed.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ * @note The stack check is performed in a architecture/port dependent way.\r
+ * It may not be implemented or some ports.\r
+ * @note The default failure mode is to halt the system with the global\r
+ * @p panic_msg variable set to @p NULL.\r
+ */\r
+#if !defined(CH_DBG_ENABLE_STACK_CHECK)\r
+#define CH_DBG_ENABLE_STACK_CHECK FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Debug option, stacks initialization.\r
+ * @details If enabled then the threads working area is filled with a byte\r
+ * value when a thread is created. This can be useful for the\r
+ * runtime measurement of the used stack.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ */\r
+#if !defined(CH_DBG_FILL_THREADS)\r
+#define CH_DBG_FILL_THREADS FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Debug option, threads profiling.\r
+ * @details If enabled then a field is added to the @p thread_t structure that\r
+ * counts the system ticks occurred while executing the thread.\r
+ *\r
+ * @note The default is @p FALSE.\r
+ * @note This debug option is not currently compatible with the\r
+ * tickless mode.\r
+ */\r
+#if !defined(CH_DBG_THREADS_PROFILING)\r
+#define CH_DBG_THREADS_PROFILING FALSE\r
+#endif\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/**\r
+ * @name Kernel hooks\r
+ * @{\r
+ */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief System structure extension.\r
+ * @details User fields added to the end of the @p ch_system_t structure.\r
+ */\r
+#define CH_CFG_SYSTEM_EXTRA_FIELDS \\r
+ /* Add threads custom fields here.*/\r
+\r
+/**\r
+ * @brief System initialization hook.\r
+ * @details User initialization code added to the @p chSysInit() function\r
+ * just before interrupts are enabled globally.\r
+ */\r
+#define CH_CFG_SYSTEM_INIT_HOOK() { \\r
+ /* Add threads initialization code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Threads descriptor structure extension.\r
+ * @details User fields added to the end of the @p thread_t structure.\r
+ */\r
+#define CH_CFG_THREAD_EXTRA_FIELDS \\r
+ /* Add threads custom fields here.*/\r
+\r
+/**\r
+ * @brief Threads initialization hook.\r
+ * @details User initialization code added to the @p _thread_init() function.\r
+ *\r
+ * @note It is invoked from within @p _thread_init() and implicitly from all\r
+ * the threads creation APIs.\r
+ */\r
+#define CH_CFG_THREAD_INIT_HOOK(tp) { \\r
+ /* Add threads initialization code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Threads finalization hook.\r
+ * @details User finalization code added to the @p chThdExit() API.\r
+ */\r
+#define CH_CFG_THREAD_EXIT_HOOK(tp) { \\r
+ /* Add threads finalization code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Context switch hook.\r
+ * @details This hook is invoked just before switching between threads.\r
+ */\r
+#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \\r
+ /* Context switch code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief ISR enter hook.\r
+ */\r
+#define CH_CFG_IRQ_PROLOGUE_HOOK() { \\r
+ /* IRQ prologue code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief ISR exit hook.\r
+ */\r
+#define CH_CFG_IRQ_EPILOGUE_HOOK() { \\r
+ /* IRQ epilogue code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Idle thread enter hook.\r
+ * @note This hook is invoked within a critical zone, no OS functions\r
+ * should be invoked from here.\r
+ * @note This macro can be used to activate a power saving mode.\r
+ */\r
+#define CH_CFG_IDLE_ENTER_HOOK() { \\r
+ /* Idle-enter code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Idle thread leave hook.\r
+ * @note This hook is invoked within a critical zone, no OS functions\r
+ * should be invoked from here.\r
+ * @note This macro can be used to deactivate a power saving mode.\r
+ */\r
+#define CH_CFG_IDLE_LEAVE_HOOK() { \\r
+ /* Idle-leave code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Idle Loop hook.\r
+ * @details This hook is continuously invoked by the idle thread loop.\r
+ */\r
+#define CH_CFG_IDLE_LOOP_HOOK() { \\r
+ /* Idle loop code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief System tick event hook.\r
+ * @details This hook is invoked in the system tick handler immediately\r
+ * after processing the virtual timers queue.\r
+ */\r
+#define CH_CFG_SYSTEM_TICK_HOOK() { \\r
+ /* System tick event code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief System halt hook.\r
+ * @details This hook is invoked in case to a system halting error before\r
+ * the system is halted.\r
+ */\r
+#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \\r
+ /* System halt code here.*/ \\r
+}\r
+\r
+/**\r
+ * @brief Trace hook.\r
+ * @details This hook is invoked each time a new record is written in the\r
+ * trace buffer.\r
+ */\r
+#define CH_CFG_TRACE_HOOK(tep) { \\r
+ /* Trace code here.*/ \\r
+}\r
+\r
+/** @} */\r
+\r
+/*===========================================================================*/\r
+/* Port-specific settings (override port settings defaulted in chcore.h). */\r
+/*===========================================================================*/\r
+\r
+#endif /* CHCONF_H */\r
+\r
+/** @} */\r
-/*
- ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio
-
- Licensed under the Apache License, Version 2.0 (the "License");
- you may not use this file except in compliance with the License.
- You may obtain a copy of the License at
-
- http://www.apache.org/licenses/LICENSE-2.0
-
- Unless required by applicable law or agreed to in writing, software
- distributed under the License is distributed on an "AS IS" BASIS,
- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- See the License for the specific language governing permissions and
- limitations under the License.
-*/
-
-/**
- * @file templates/halconf.h
- * @brief HAL configuration header.
- * @details HAL configuration file, this file allows to enable or disable the
- * various device drivers from your application. You may also use
- * this file in order to override the device drivers default settings.
- *
- * @addtogroup HAL_CONF
- * @{
- */
-
-#ifndef _HALCONF_H_
-#define _HALCONF_H_
-
-#include "mcuconf.h"
-
-/**
- * @brief Enables the PAL subsystem.
- */
-#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)
-#define HAL_USE_PAL TRUE
-#endif
-
-/**
- * @brief Enables the ADC subsystem.
- */
-#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)
-#define HAL_USE_ADC FALSE
-#endif
-
-/**
- * @brief Enables the CAN subsystem.
- */
-#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)
-#define HAL_USE_CAN FALSE
-#endif
-
-/**
- * @brief Enables the DAC subsystem.
- */
-#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)
-#define HAL_USE_DAC FALSE
-#endif
-
-/**
- * @brief Enables the EXT subsystem.
- */
-#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)
-#define HAL_USE_EXT FALSE
-#endif
-
-/**
- * @brief Enables the GPT subsystem.
- */
-#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)
-#define HAL_USE_GPT FALSE
-#endif
-
-/**
- * @brief Enables the I2C subsystem.
- */
-#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)
-#define HAL_USE_I2C FALSE
-#endif
-
-/**
- * @brief Enables the I2S subsystem.
- */
-#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)
-#define HAL_USE_I2S FALSE
-#endif
-
-/**
- * @brief Enables the ICU subsystem.
- */
-#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)
-#define HAL_USE_ICU FALSE
-#endif
-
-/**
- * @brief Enables the MAC subsystem.
- */
-#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)
-#define HAL_USE_MAC FALSE
-#endif
-
-/**
- * @brief Enables the MMC_SPI subsystem.
- */
-#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_MMC_SPI FALSE
-#endif
-
-/**
- * @brief Enables the PWM subsystem.
- */
-#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)
-#define HAL_USE_PWM FALSE
-#endif
-
-/**
- * @brief Enables the RTC subsystem.
- */
-#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)
-#define HAL_USE_RTC FALSE
-#endif
-
-/**
- * @brief Enables the SDC subsystem.
- */
-#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)
-#define HAL_USE_SDC FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL subsystem.
- */
-#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL FALSE
-#endif
-
-/**
- * @brief Enables the SERIAL over USB subsystem.
- */
-#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)
-#define HAL_USE_SERIAL_USB FALSE
-#endif
-
-/**
- * @brief Enables the SPI subsystem.
- */
-#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)
-#define HAL_USE_SPI FALSE
-#endif
-
-/**
- * @brief Enables the UART subsystem.
- */
-#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)
-#define HAL_USE_UART FALSE
-#endif
-
-/**
- * @brief Enables the USB subsystem.
- */
-#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)
-#define HAL_USE_USB TRUE
-#endif
-
-/**
- * @brief Enables the WDG subsystem.
- */
-#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)
-#define HAL_USE_WDG FALSE
-#endif
-
-/*===========================================================================*/
-/* ADC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)
-#define ADC_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define ADC_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* CAN driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Sleep mode related APIs inclusion switch.
- */
-#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)
-#define CAN_USE_SLEEP_MODE TRUE
-#endif
-
-/*===========================================================================*/
-/* I2C driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables the mutual exclusion APIs on the I2C bus.
- */
-#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define I2C_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* MAC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)
-#define MAC_USE_ZERO_COPY FALSE
-#endif
-
-/**
- * @brief Enables an event sources for incoming packets.
- */
-#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)
-#define MAC_USE_EVENTS TRUE
-#endif
-
-/*===========================================================================*/
-/* MMC_SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- * This option is recommended also if the SPI driver does not
- * use a DMA channel and heavily loads the CPU.
- */
-#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)
-#define MMC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SDC driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Number of initialization attempts before rejecting the card.
- * @note Attempts are performed at 10mS intervals.
- */
-#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)
-#define SDC_INIT_RETRY 100
-#endif
-
-/**
- * @brief Include support for MMC cards.
- * @note MMC support is not yet implemented so this option must be kept
- * at @p FALSE.
- */
-#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)
-#define SDC_MMC_SUPPORT FALSE
-#endif
-
-/**
- * @brief Delays insertions.
- * @details If enabled this options inserts delays into the MMC waiting
- * routines releasing some extra CPU time for the threads with
- * lower priority, this may slow down the driver a bit however.
- */
-#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)
-#define SDC_NICE_WAITING TRUE
-#endif
-
-/*===========================================================================*/
-/* SERIAL driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Default bit rate.
- * @details Configuration parameter, this is the baud rate selected for the
- * default configuration.
- */
-#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)
-#define SERIAL_DEFAULT_BITRATE 38400
-#endif
-
-/**
- * @brief Serial buffers size.
- * @details Configuration parameter, you can change the depth of the queue
- * buffers depending on the requirements of your application.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_BUFFERS_SIZE 16
-#endif
-
-/*===========================================================================*/
-/* SERIAL_USB driver related setting. */
-/*===========================================================================*/
-
-/**
- * @brief Serial over USB buffers size.
- * @details Configuration parameter, the buffer size must be a multiple of
- * the USB data endpoint maximum packet size.
- * @note The default is 64 bytes for both the transmission and receive
- * buffers.
- */
-#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)
-#define SERIAL_USB_BUFFERS_SIZE 256
-#endif
-
-/*===========================================================================*/
-/* SPI driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)
-#define SPI_USE_WAIT TRUE
-#endif
-
-/**
- * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)
-#define SPI_USE_MUTUAL_EXCLUSION TRUE
-#endif
-
-/*===========================================================================*/
-/* USB driver related settings. */
-/*===========================================================================*/
-
-/**
- * @brief Enables synchronous APIs.
- * @note Disabling this option saves both code and data space.
- */
-#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)
-#define USB_USE_WAIT TRUE
-#endif
-
-#endif /* _HALCONF_H_ */
-
-/** @} */
+/*\r
+ ChibiOS - Copyright (C) 2006..2018 Giovanni Di Sirio\r
+\r
+ Licensed under the Apache License, Version 2.0 (the "License");\r
+ you may not use this file except in compliance with the License.\r
+ You may obtain a copy of the License at\r
+\r
+ http://www.apache.org/licenses/LICENSE-2.0\r
+\r
+ Unless required by applicable law or agreed to in writing, software\r
+ distributed under the License is distributed on an "AS IS" BASIS,\r
+ WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\r
+ See the License for the specific language governing permissions and\r
+ limitations under the License.\r
+*/\r
+\r
+/**\r
+ * @file templates/halconf.h\r
+ * @brief HAL configuration header.\r
+ * @details HAL configuration file, this file allows to enable or disable the\r
+ * various device drivers from your application. You may also use\r
+ * this file in order to override the device drivers default settings.\r
+ *\r
+ * @addtogroup HAL_CONF\r
+ * @{\r
+ */\r
+\r
+#ifndef _HALCONF_H_\r
+#define _HALCONF_H_\r
+\r
+#define _CHIBIOS_HAL_CONF_\r
+#define _CHIBIOS_HAL_CONF_VER_6_0_\r
+\r
+#include "mcuconf.h"\r
+\r
+/**\r
+ * @brief Enables the PAL subsystem.\r
+ */\r
+#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__)\r
+#define HAL_USE_PAL TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the ADC subsystem.\r
+ */\r
+#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__)\r
+#define HAL_USE_ADC FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the CAN subsystem.\r
+ */\r
+#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__)\r
+#define HAL_USE_CAN FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the DAC subsystem.\r
+ */\r
+#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__)\r
+#define HAL_USE_DAC FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the EXT subsystem.\r
+ */\r
+#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__)\r
+#define HAL_USE_EXT FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the GPT subsystem.\r
+ */\r
+#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__)\r
+#define HAL_USE_GPT FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the I2C subsystem.\r
+ */\r
+#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__)\r
+#define HAL_USE_I2C FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the I2S subsystem.\r
+ */\r
+#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__)\r
+#define HAL_USE_I2S FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the ICU subsystem.\r
+ */\r
+#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__)\r
+#define HAL_USE_ICU FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the MAC subsystem.\r
+ */\r
+#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__)\r
+#define HAL_USE_MAC FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the MMC_SPI subsystem.\r
+ */\r
+#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__)\r
+#define HAL_USE_MMC_SPI FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the PWM subsystem.\r
+ */\r
+#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__)\r
+#define HAL_USE_PWM FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the RTC subsystem.\r
+ */\r
+#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__)\r
+#define HAL_USE_RTC FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the SDC subsystem.\r
+ */\r
+#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__)\r
+#define HAL_USE_SDC FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the SERIAL subsystem.\r
+ */\r
+#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__)\r
+#define HAL_USE_SERIAL FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the SERIAL over USB subsystem.\r
+ */\r
+#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__)\r
+#define HAL_USE_SERIAL_USB FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the SPI subsystem.\r
+ */\r
+#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__)\r
+#define HAL_USE_SPI FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the UART subsystem.\r
+ */\r
+#if !defined(HAL_USE_UART) || defined(__DOXYGEN__)\r
+#define HAL_USE_UART FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the USB subsystem.\r
+ */\r
+#if !defined(HAL_USE_USB) || defined(__DOXYGEN__)\r
+#define HAL_USE_USB TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the WDG subsystem.\r
+ */\r
+#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__)\r
+#define HAL_USE_WDG FALSE\r
+#endif\r
+\r
+/*===========================================================================*/\r
+/* ADC driver related settings. */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Enables synchronous APIs.\r
+ * @note Disabling this option saves both code and data space.\r
+ */\r
+#if !defined(ADC_USE_WAIT) || defined(__DOXYGEN__)\r
+#define ADC_USE_WAIT TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables the @p adcAcquireBus() and @p adcReleaseBus() APIs.\r
+ * @note Disabling this option saves both code and data space.\r
+ */\r
+#if !defined(ADC_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)\r
+#define ADC_USE_MUTUAL_EXCLUSION TRUE\r
+#endif\r
+\r
+/*===========================================================================*/\r
+/* CAN driver related settings. */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Sleep mode related APIs inclusion switch.\r
+ */\r
+#if !defined(CAN_USE_SLEEP_MODE) || defined(__DOXYGEN__)\r
+#define CAN_USE_SLEEP_MODE TRUE\r
+#endif\r
+\r
+/*===========================================================================*/\r
+/* I2C driver related settings. */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Enables the mutual exclusion APIs on the I2C bus.\r
+ */\r
+#if !defined(I2C_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)\r
+#define I2C_USE_MUTUAL_EXCLUSION TRUE\r
+#endif\r
+\r
+/*===========================================================================*/\r
+/* MAC driver related settings. */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Enables the zero-copy API.\r
+ */\r
+#if !defined(MAC_USE_ZERO_COPY) || defined(__DOXYGEN__)\r
+#define MAC_USE_ZERO_COPY FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables an event sources for incoming packets.\r
+ */\r
+#if !defined(MAC_USE_EVENTS) || defined(__DOXYGEN__)\r
+#define MAC_USE_EVENTS TRUE\r
+#endif\r
+\r
+/*===========================================================================*/\r
+/* MMC_SPI driver related settings. */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Delays insertions.\r
+ * @details If enabled this options inserts delays into the MMC waiting\r
+ * routines releasing some extra CPU time for the threads with\r
+ * lower priority, this may slow down the driver a bit however.\r
+ * This option is recommended also if the SPI driver does not\r
+ * use a DMA channel and heavily loads the CPU.\r
+ */\r
+#if !defined(MMC_NICE_WAITING) || defined(__DOXYGEN__)\r
+#define MMC_NICE_WAITING TRUE\r
+#endif\r
+\r
+/*===========================================================================*/\r
+/* SDC driver related settings. */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Number of initialization attempts before rejecting the card.\r
+ * @note Attempts are performed at 10mS intervals.\r
+ */\r
+#if !defined(SDC_INIT_RETRY) || defined(__DOXYGEN__)\r
+#define SDC_INIT_RETRY 100\r
+#endif\r
+\r
+/**\r
+ * @brief Include support for MMC cards.\r
+ * @note MMC support is not yet implemented so this option must be kept\r
+ * at @p FALSE.\r
+ */\r
+#if !defined(SDC_MMC_SUPPORT) || defined(__DOXYGEN__)\r
+#define SDC_MMC_SUPPORT FALSE\r
+#endif\r
+\r
+/**\r
+ * @brief Delays insertions.\r
+ * @details If enabled this options inserts delays into the MMC waiting\r
+ * routines releasing some extra CPU time for the threads with\r
+ * lower priority, this may slow down the driver a bit however.\r
+ */\r
+#if !defined(SDC_NICE_WAITING) || defined(__DOXYGEN__)\r
+#define SDC_NICE_WAITING TRUE\r
+#endif\r
+\r
+/*===========================================================================*/\r
+/* SERIAL driver related settings. */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Default bit rate.\r
+ * @details Configuration parameter, this is the baud rate selected for the\r
+ * default configuration.\r
+ */\r
+#if !defined(SERIAL_DEFAULT_BITRATE) || defined(__DOXYGEN__)\r
+#define SERIAL_DEFAULT_BITRATE 38400\r
+#endif\r
+\r
+/**\r
+ * @brief Serial buffers size.\r
+ * @details Configuration parameter, you can change the depth of the queue\r
+ * buffers depending on the requirements of your application.\r
+ * @note The default is 16 bytes for both the transmission and receive\r
+ * buffers.\r
+ */\r
+#if !defined(SERIAL_BUFFERS_SIZE) || defined(__DOXYGEN__)\r
+#define SERIAL_BUFFERS_SIZE 16\r
+#endif\r
+\r
+/*===========================================================================*/\r
+/* SERIAL_USB driver related setting. */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Serial over USB buffers size.\r
+ * @details Configuration parameter, the buffer size must be a multiple of\r
+ * the USB data endpoint maximum packet size.\r
+ * @note The default is 64 bytes for both the transmission and receive\r
+ * buffers.\r
+ */\r
+#if !defined(SERIAL_USB_BUFFERS_SIZE) || defined(__DOXYGEN__)\r
+#define SERIAL_USB_BUFFERS_SIZE 256\r
+#endif\r
+\r
+/*===========================================================================*/\r
+/* SPI driver related settings. */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Enables synchronous APIs.\r
+ * @note Disabling this option saves both code and data space.\r
+ */\r
+#if !defined(SPI_USE_WAIT) || defined(__DOXYGEN__)\r
+#define SPI_USE_WAIT TRUE\r
+#endif\r
+\r
+/**\r
+ * @brief Enables circular transfers APIs.\r
+ * @note Disabling this option saves both code and data space.\r
+ */\r
+#if !defined(SPI_USE_CIRCULAR) || defined(__DOXYGEN__)\r
+#define SPI_USE_CIRCULAR FALSE\r
+#endif\r
+\r
+\r
+/**\r
+ * @brief Enables the @p spiAcquireBus() and @p spiReleaseBus() APIs.\r
+ * @note Disabling this option saves both code and data space.\r
+ */\r
+#if !defined(SPI_USE_MUTUAL_EXCLUSION) || defined(__DOXYGEN__)\r
+#define SPI_USE_MUTUAL_EXCLUSION TRUE\r
+#endif\r
+\r
+/*===========================================================================*/\r
+/* USB driver related settings. */\r
+/*===========================================================================*/\r
+\r
+/**\r
+ * @brief Enables synchronous APIs.\r
+ * @note Disabling this option saves both code and data space.\r
+ */\r
+#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__)\r
+#define USB_USE_WAIT TRUE\r
+#endif\r
+\r
+#endif /* _HALCONF_H_ */\r
+\r
+/** @} */\r
projects / max / tmk_keyboard.git / commitdiff