Add SpaceFN keymap and JIS keymap

diff --git a/converter/ps2_usb/README b/converter/ps2_usb/README
deleted file mode 100644 (file)
index cb7ba55..0000000
--- a/converter/ps2_usb/README
+++ /dev/null
@@ -1,122 +0,0 @@
-PS/2 to USB keyboard converter
-==============================
-This firmware converts PS/2 keyboard protocol to USB and supports only Scan Code Set 2.
-This will works on USB AVR(ATMega32U4, AT90USB) or V-USB(ATMega168, 328...).
-
-
-Features
---------
-Mouse keys
-    You can emulates mouse move and button click using keyboard.
-System/Media control
-    You can sends Power event, Volume down/up and Mute.
-USB NKRO(actually 120KRO+8Modifiers)
-    You can tolggles NKRO feature.
-Keymap customization
-    You can customize keymaps easily by editing source code. See keymap.c.
-
-
-PS/2 signal handling implementations
-------------------------------------
-Following three methods are used to implement PS/2 signal handling.
-a. Simple and stupid busy-wait(ps2.c)
-    This is expected to implemented with portable C code for reference.
-b. Interrupt driven(ps2.c)
-    Uses external interrupt to detect falling edge of clock line.
-c. USART hardware module(ps2_usart.c)
-    Uses AVR USART engine to recevie PS/2 signal. Recomended and default.
-    This is required to work with V-USB, preceding two methods tend to
-    miss signal edges while V-USB handles USB.
-
-To select method edit Makefile.
-
-
-Connect Wires
--------------
-In case of Teensy2.0(ATMega32U4):
-0. Connect Vcc and GND.
-1. Connect Clock and Data line. 
-    For a. Clock is on PF0 and Data on PF1.
-    For b. Clock is on PD1 and Data on PD2.
-    For c. Clock is on PD5 and Data on PD2.
-2. Optionally you need pull-up register. 1K-10K Ohm is OK.
-
-To change pin configuration edit config.h.
-
-
-Build Frimware
---------------
-1. Edit Makefile for build options and MCU setting.
-    Use 'atmega32u4' for Teensy 2.0 or 'at90usb1286' for Teensy++ 2.0.
-2. make
-    Just type `make` in a terminal.
-    Use `-f Makefile.vusb` option to build V-USB converter.
-    Use `-f Makefile.jis` option to use JIS keyboard.
-3. program MCU.
-    In case of Teensy use `Teensy Loader`.(http://www.pjrc.com/teensy/loader.html)
-    Otherwise you want to use `avrdude` or `dfu-programmer`.
-
-
-Demonstration of Features
--------------------------
-In default configuration, you can try several keymaps, mousekeys and USB NKRO.
-Use following magic key combinations to enable some features.
-
-keymaps and NKRO:
-    Magic+0:    Qwerty with mousekeys(default)
-    Magic+1:    Qwerty without mousekeys
-    Magic+2:    Colemak
-    Magic+3:    Dvorak
-    Magic+4:    Workman
-    Magic+N:    toggles NKRO/6KRO(6KRO by default)
-    Magic+Esc:  sends Power Event(Power button)
-
-    where Magic=(LShift+RShift) or (LControl+RShift)
-
-Fn layer function:
-    Fn0+(hjkl): Mousekey move(vi cursor like)
-    Fn0+(yuio): Mouse wheel(left,down,up,right)
-    Fn0+space:  Mouse left button
-    Fn0+(mnb):  Mouse buttons(m=left, n=right, b=middle)
-    Fn0+(zxc):  Media control(Volup, Voldown, Mute)
-    Fn1+(hjkl): Cursor move(vi cursor like)
-    Fn1+(nm,.): Cursor move(Home,PageDown,PageUp,End)
-
-    where Fn0=;, Fn1=/
-
-
-Keymap
-------
-You can change a keymap by editing code of keymap. See common/keycode.h for key symbols.
-
-
-V-USB Support
--------------
-You can also use this converter on ATmega(168/328) with V-USB instead of Teensy.
-The converter on V-USB lacks some features for now: USB NKRO and System/Media control.
-
-Circuit
--------
-                +---+   +---------------+
-USB            GND  |   |   ATmega168   |
-===                 C3  |               |
-5V <-------+--------+---|Vcc,AVCC       |        PS/2
-           R1           |               |        ====
-D- <----+--+-----R2-----|INT1        RXD|------->DATA
-D+ <----|---+----R3-----|INT0        XCK|------->CLOCK
-        Z1  Z2          |               |      ->5V
-GND<----+---+--+--+-----|GND            |      ->GND
-               |  |     |               |
-               |  C2-+--|XTAL1          |
-               |     X1 |               |
-               +--C3-+--|XTAL2          |
-                        +---------------+
-R1:     1.5K Ohm
-R2,R3:  68 Ohm
-Z1,Z2:  Zenner 3.6V
-C1,C2:  22pF
-C3:     0.1uF
-X1:     Crystal 20MHz(16MHz/12MHz)
-
-
-EOF

diff --git a/converter/ps2_usb/README.md b/converter/ps2_usb/README.md
new file mode 100644 (file)
index 0000000..65e616e
--- /dev/null
+++ b/converter/ps2_usb/README.md
@@ -0,0 +1,76 @@
+PS/2 to USB keyboard converter
+==============================
+This firmware converts PS/2 keyboard protocol to USB and supports only Scan Code Set 2.
+
+
+PS/2 signal handling implementations
+------------------------------------
+Following three methods are used to implement PS/2 signal handling.
+
+### Simple and stupid busy-wait(ps2_busywait.c)
+    This is expected to implemented with portable C code for reference.
+### Interrupt driven(ps2_interrupt.c)
+    Uses pin interrupt to detect falling edge of clock line.
+### USART hardware module(ps2_usart.c)
+    Uses AVR USART engine to recevie PS/2 signal.
+
+To select method edit Makefile.
+
+
+Connect Wires
+-------------
+In case of Teensy2.0(ATMega32U4):
+
+1. Connect Vcc and GND.
+2. Connect Clock and Data line. 
+    - Busywait:    Clock is on PD5 and Data on PD2.
+    - Interrupt:   Clock is on PD1 and Data on PD2.
+    - USART:       Clock is on PD5 and Data on PD2.
+3. Optionally you need pull-up register. 1K-10K Ohm is OK.
+
+To change pin configuration edit config.h.
+
+
+Build Frimware
+--------------
+Just run `make`:
+
+    $ make
+
+To select keymap:
+
+    $ make KEYMAP=[plain|jis|spacefn|...]
+
+
+Keymap
+------
+Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `keymap_<name>.c` and see keymap document(you can find in top README.md) and existent keymap files.
+
+
+V-USB Support
+-------------
+You can also use this converter on ATmega(168/328) with V-USB instead of Teensy.
+The converter on V-USB lacks some features for now: USB NKRO and System/Media control.
+
+Circuit:
+
+                    +---+   +---------------+
+    USB            GND  |   |   ATmega168   |
+    ===                 C3  |               |
+    5V <-------+--------+---|Vcc,AVCC       |        PS/2
+               R1           |               |        ====
+    D- <----+--+-----R2-----|INT1        RXD|------->DATA
+    D+ <----|---+----R3-----|INT0        XCK|------->CLOCK
+            Z1  Z2          |               |      ->5V
+    GND<----+---+--+--+-----|GND            |      ->GND
+                   |  |     |               |
+                   |  C2-+--|XTAL1          |
+                   |     X1 |               |
+                   +--C3-+--|XTAL2          |
+                            +---------------+
+    R1:     1.5K Ohm
+    R2,R3:  68 Ohm
+    Z1,Z2:  Zenner 3.6V
+    C1,C2:  22pF
+    C3:     0.1uF
+    X1:     Crystal 20MHz(16MHz/12MHz)

diff --git a/converter/ps2_usb/keymap_jis.c b/converter/ps2_usb/keymap_jis.c
index 866ccd9174d9c8bd2204ca2b4c1e507e0c18d149..02585150fbc9adde63c7c03d316bb95b669f8e39 100644 (file)
--- a/converter/ps2_usb/keymap_jis.c
+++ b/converter/ps2_usb/keymap_jis.c
@@ -1,175 +1,9 @@
 /*
-Copyright 2011 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
-
-/* 
- * Keymap for PS/2 keyboard
+ * JIS layout Japanese keyboard
  */
-#include <stdint.h>
-#include <stdbool.h>
-#include <avr/pgmspace.h>
-#include "keycode.h"
-#include "print.h"
-#include "debug.h"
-#include "util.h"
-#include "keymap.h"
-
-
-
-
-// Following macros help you to define a keymap with the form of actual keyboard layout.
-
-/* US layout plus all other various keys */
-#define KEYMAP_ALL( \
-    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
-    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
-    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
-    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
-    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
-    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA, \
-                                                                                            \
-    K61,                     /* for European ISO */                                         \
-    K51, K13, K6A, K64, K67, /* for Japanese JIS */                                         \
-    K08, K10, K18, K20, K28, K30, K38, K40, K48, K50, K57, K5F, /* F13-24 */                \
-    KB7, KBF, KDE,           /* System Power, Sleep, Wake */                                \
-    KA3, KB2, KA1,           /* Mute, Volume Up, Volume Down */                             \
-    KCD, K95, KBB, KB4, KD0, /* Next, Previous, Stop, Pause, Media Select */                \
-    KC8, KAB, KC0,           /* Mail, Calculator, My Computer */                            \
-    K90, KBA, KB8, KB0,      /* WWW Search, Home, Back, Forward */                          \
-    KA8, KA0, K98            /* WWW Stop, Refresh, Favorites */                             \
-) { \
-    { KC_NO,    KC_##K01, KC_NO,    KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \
-    { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_NO    }, \
-    { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_NO    }, \
-    { KC_##K18, KC_NO,    KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_NO    }, \
-    { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_NO    }, \
-    { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_NO    }, \
-    { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_NO    }, \
-    { KC_##K38, KC_NO,    KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_NO    }, \
-    { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_NO    }, \
-    { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO    }, \
-    { KC_##K50, KC_##K51, KC_##K52, KC_NO,    KC_##K54, KC_##K55, KC_NO,    KC_##K57 }, \
-    { KC_##K58, KC_##K59, KC_##K5A, KC_##K5B, KC_NO,    KC_##K5D, KC_NO,    KC_##K5F }, \
-    { KC_NO,    KC_##K61, KC_NO,    KC_NO,    KC_##K64, KC_NO,    KC_##K66, KC_##K67 }, \
-    { KC_NO,    KC_##K69, KC_##K6A, KC_##K6B, KC_##K6C, KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_##K75, KC_##K76, KC_##K77 }, \
-    { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_##K7C, KC_##K7D, KC_##K7E, KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_##K83, KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_##K90, KC_##K91, KC_NO,    KC_NO,    KC_##K94, KC_##K95, KC_NO,    KC_NO    }, \
-    { KC_##K98, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_##K9F }, \
-    { KC_##KA0, KC_##KA1, KC_NO,    KC_##KA3, KC_NO,    KC_NO,    KC_NO,    KC_##KA7 }, \
-    { KC_##KA8, KC_NO,    KC_NO,    KC_##KAB, KC_NO,    KC_NO,    KC_NO,    KC_##KAF }, \
-    { KC_##KB0, KC_NO,    KC_##KB2, KC_NO,    KC_##KB4, KC_NO,    KC_NO,    KC_##KB7 }, \
-    { KC_##KB8, KC_NO,    KC_##KBA, KC_##KBB, KC_NO,    KC_NO,    KC_NO,    KC_##KBF }, \
-    { KC_##KC0, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_##KC8, KC_NO,    KC_##KCA, KC_NO,    KC_NO,    KC_##KCD, KC_NO,    KC_NO    }, \
-    { KC_##KD0, KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_##KDA, KC_NO,    KC_NO,    KC_NO,    KC_##KDE, KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_##KE9, KC_NO,    KC_##KEB, KC_##KEC, KC_NO,    KC_NO,    KC_NO    }, \
-    { KC_##KF0, KC_##KF1, KC_##KF2, KC_NO,    KC_##KF4, KC_##KF5, KC_NO,    KC_NO    }, \
-    { KC_NO,    KC_NO,    KC_##KFA, KC_NO,    KC_##KFC, KC_##KFD, KC_##KFE, KC_NO    }, \
-}
-
-/* JIS layout */
-#define KEYMAP_JIS( \
-    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,         KFC,K7E,KFE,                   \
-    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
-    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,         KF1,KE9,KFA,  K6C,K75,K7D,     \
-    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,    K5A,               K6B,K73,K74,K79, \
-    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51,        K59,     KF5,      K69,K72,K7A,     \
-    K14,K9F,K11,    K67,K29,K64,K13,            K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA  \
-) \
-KEYMAP_ALL( \
-    K76,K05,K06,K04,K0C,K03,K0B,K83,K0A,K01,K09,K78,K07,     KFC,K7E,KFE,                   \
-    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, KF0,KEC,KFD,  K77,KCA,K7C,K7B, \
-    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, KF1,KE9,KFA,  K6C,K75,K7D,     \
-    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,               K6B,K73,K74,K79, \
-    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,     KF5,      K69,K72,K7A,     \
-    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, KEB,KF2,KF4,  K70,    K71,KDA, \
-                                                                                            \
-    NUBS,                                                                                   \
-    K51, K13, K6A, K64, K67,                                                                \
-    F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,                             \
-    SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE,                                                \
-    AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN,                                               \
-    MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT,         \
-    MAIL, CALCULATOR, MY_COMPUTER,                                                          \
-    WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD,                                            \
-    WWW_STOP, WWW_REFRESH, WWW_FAVORITES                                                    \
-)
-
-#define KEYMAP_JIS_COMPACT( \
-    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K6A,K66, \
-    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,         \
-    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,K5D,    K5A, \
-    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,K51,        K59, \
-    K14,K9F,K11,    K67,K29,K64,K13,            K91,KA7,KAF,K94  \
-) \
-KEYMAP_ALL( \
-    ESC,F1, F2, F3, F4, F5, F6, F7, F8, F9, F10,F11,F12,     PSCR,SLCK,BRK,                          \
-    K0E,K16,K1E,K26,K25,K2E,K36,K3D,K3E,K46,K45,K4E,K55,K66, INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS, \
-    K0D,K15,K1D,K24,K2D,K2C,K35,K3C,K43,K44,K4D,K54,K5B,K5D, DEL, END, PGDN,    P7,  P8,  P9,        \
-    K58,K1C,K1B,K23,K2B,K34,K33,K3B,K42,K4B,K4C,K52,    K5A,                    P4,  P5,  P6,  PPLS, \
-    K12,K1A,K22,K21,K2A,K32,K31,K3A,K41,K49,K4A,        K59,      UP,           P1,  P2,  P3,        \
-    K14,K9F,K11,        K29,                K91,KA7,KAF,K94, LEFT,DOWN,RGHT,    P0,       PDOT,PENT, \
-                                                                                            \
-    NUBS,                                                                                   \
-    K51, K13, K6A, K64, K67,                                                                \
-    F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24,                             \
-    SYSTEM_POWER, SYSTEM_SLEEP, SYSTEM_WAKE,                                                \
-    AUDIO_MUTE, AUDIO_VOL_UP, AUDIO_VOL_DOWN,                                               \
-    MEDIA_NEXT_TRACK, MEDIA_PREV_TRACK, MEDIA_STOP, MEDIA_PLAY_PAUSE, MEDIA_SELECT,         \
-    MAIL, CALCULATOR, MY_COMPUTER,                                                          \
-    WWW_SEARCH, WWW_HOME, WWW_BACK, WWW_FORWARD,                                            \
-    WWW_STOP, WWW_REFRESH, WWW_FAVORITES                                                    \
-)
-
-
-// Assign Fn key(0-7) to a layer to which switch with the Fn key pressed.
-static const uint8_t PROGMEM fn_layer[] = {
-    1,              // Fn0
-    2,              // Fn1
-    1,              // Fn2
-    2,              // Fn3
-    3,              // Fn4
-    4,              // Fn5
-    0,              // Fn6
-    0               // Fn7
-};
-
-// Assign Fn key(0-7) to a keycode sent when release Fn key without use of the layer.
-// See layer.c for details.
-static const uint8_t PROGMEM fn_keycode[] = {
-    KC_SCLN,        // Fn0
-    KC_SLSH,        // Fn1
-    KC_BSPC,        // Fn2
-    KC_NO,          // Fn3
-    KC_NO,          // Fn4
-    KC_SPC,         // Fn5
-    KC_NO,          // Fn6
-    KC_NO           // Fn7
-};
-
+#include "keymap_common.h"
 
-// The keymap is a 32*8 byte array which convert a PS/2 scan code into a USB keycode.
-// See keycode.h for USB keycodes. You should omit a 'KC_' prefix of USB keycodes in keymap macro.
-// Use KEYMAP_ISO() or KEYMAP_JIS() instead of KEYMAP() if your keyboard is ISO or JIS.
-static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     /* 0: JIS LAYOUT
      * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.     ,-----------.
      * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|     |Pwr|Slp|Wak|
@@ -186,7 +20,6 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |Ctrl |Gui |Alt |MHEN| Space  |HENK|KANA|Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| |      0|  .|   |
      * `-----------------------------------------------------------' `-----------' `---------------'
      */
-/*
     KEYMAP_JIS(
     ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,                PSCR,SLCK,BRK,
     GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, JYEN,BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
@@ -195,103 +28,7 @@ static const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,RO,            RSFT,          UP,           P1,  P2,  P3,
     LCTL,LGUI,LALT,     MHEN,SPC, HENK,KANA,               RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
     ),
-*/
-    /* 0: HHKB-wise
-     * ,-----------------------------------------------------------.
-     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|  \|  `|
-     * |-----------------------------------------------------------|
-     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]| Bsp |
-     * |------------------------------------------------------`    |
-     * |Ctrl  |  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  :|Ret|    |
-     * |-----------------------------------------------------------|
-     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /| RO|Shift |
-     * |-----------------------------------------------------------|
-     * |Ctrl |Gui |Alt |MHEN| Space  |HENK|KANA|Alt |Gui |Menu|Ctrl|
-     * `-----------------------------------------------------------'
-     */
-    KEYMAP_JIS_COMPACT(
-    ESC, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSLS,BSPC,
-    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,
-    LCTL,A,   S,   D,   F,   G,   H,   J,   K,   L,   FN0, QUOT,GRV,      ENT,
-    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, FN1, RSFT,          FN4,
-    LCTL,LGUI,LALT,     LALT,FN5, FN2, FN3,                RALT,RGUI,APP, LGUI
-    ),
-
-    /* 1: Mouse keys
-     * ,-----------------------------------------------------------.
-     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
-     * |-----------------------------------------------------------|
-     * |Tab  |MwL|MwU|McU|WwU|WwR|MwL|MwD|MwU|MwR|   |   |   |    \|
-     * |-----------------------------------------------------------|
-     * |CapsLo|   |McL|McD|McR|   |McL|McD|McU|McR|Fn0|   |Return  |
-     * |-----------------------------------------------------------|
-     * |Shift   |VoD|VoU|Mut|Mb2|Mb3|Mb2|Mb1|VoD|VoU|Mut|Shift     |
-     * |-----------------------------------------------------------|
-     * |Ctrl |Gui |Alt |         Mb1           |Alt |Gui |Menu|Ctrl|
-     * `-----------------------------------------------------------'
-     * Mc = mouse cursor, Mw = mouse wheel, Mb = mouse button
-     * Vo = Volume, Mut = Mute
-     */
-    KEYMAP_JIS_COMPACT(
-    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, INS, DEL,
-    TAB, WH_L,WH_D,MS_U,WH_U,WH_R,WH_L,WH_D,WH_U,WH_R,NO,  NO,  NO,
-    LCTL,NO,  MS_L,MS_D,MS_R,NO,  MS_L,MS_D,MS_U,MS_R,FN0, NO,  NO,       ENT,
-    LSFT,NO,  NO,  BTN1,BTN2,BTN3,BTN2,BTN1,BTN2,BTN3,NO,  RSFT,          RSFT,
-    LCTL,LGUI,LALT,     LALT,BTN1,FN2, RALT,               RALT,RGUI,APP, LGUI
-    ),
-
-    /* 2: Cursor keys
-     * ,-----------------------------------------------------------.
-     * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Backspa|
-     * |-----------------------------------------------------------|
-     * |Tab  |Hom|PgU| Up|PgU|End|Hom|PgD|PgU|End|   |   |   |    \|
-     * |-----------------------------------------------------------|
-     * |CapsLo|   |Lef|Dow|Rig|   |Lef|Dow| Up|Rig|   |   |Return  |
-     * |-----------------------------------------------------------|
-     * |Shift   |   |   |   |   |   |Hom|PgD|PgU|End|Fn1|Shift     |
-     * |-----------------------------------------------------------|
-     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl|
-     * `-----------------------------------------------------------'
-     */
-    KEYMAP_JIS_COMPACT(
-    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, INS, DEL,
-    TAB, HOME,PGUP,UP,  PGDN,END, HOME,PGDN,PGUP,END, NO,  NO,  NO,
-    LCTL,HOME,LEFT,DOWN,RGHT,END, LEFT,DOWN,UP,  RGHT,NO,  NO,  NO,       ENT,
-    LSFT,NO,  NO,  NO,  NO,  NO,  HOME,PGDN,PGUP,END, FN1, RSFT,          RSFT,
-    LCTL,LGUI,LALT,     LALT,BTN1,BSPC,FN3,                RALT,RGUI,APP, LGUI
-    ),
-
-    /* 3: HHKB Fn layer */
-    KEYMAP_JIS_COMPACT(
-    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, INS, DEL,
-    CAPS,NO,  NO,  NO,  NO,  NO,  NO,  NO,  PSCR,SLCK,PAUS,UP,  NO,
-    LCTL,VOLD,VOLU,MUTE,NO,  NO,  NO,  NO,  HOME,PGUP,LEFT,RGHT,NO,       ENT,
-    LSFT,NO,  NO,  NO,  NO,  NO,  NO,  NO,  END, PGDN,DOWN,RSFT,          FN4,
-    LCTL,LGUI,LALT,     LALT,SPC, BSPC,NO,                 RALT,RGUI,APP, LGUI
-    ),
-
-    /* 4: Number */
-    KEYMAP_JIS_COMPACT(
-    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F8,  F10, F11, F12, INS, DEL,
-    TAB, NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,
-    LCTL,1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL,      ENT,
-    LSFT,NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  NO,  RSFT,          RSFT,
-    LCTL,LGUI,LALT,     LALT,FN5, BSPC,NO,                 RALT,RGUI,APP, LGUI
-    ),
 };
 
-
-uint8_t keymap_get_keycode(uint8_t layer, uint8_t row, uint8_t col)
-{
-    return pgm_read_byte(&keymaps[(layer)][(row)][(col)]);
-}
-
-uint8_t keymap_fn_layer(uint8_t index)
-{
-    return pgm_read_byte(&fn_layer[index]);
-}
-
-uint8_t keymap_fn_keycode(uint8_t index)
-{
-    return pgm_read_byte(&fn_keycode[index]);
-}
+const uint16_t PROGMEM fn_actions[] = {
+};

diff --git a/converter/ps2_usb/keymap_plain.c b/converter/ps2_usb/keymap_plain.c
index 9c6e7d9ff1c703c8c75e8f90a45a53a54ff7db46..51b2fddb5b2e98e8b0fdf289589a47db07cdf87b 100644 (file)
--- a/converter/ps2_usb/keymap_plain.c
+++ b/converter/ps2_usb/keymap_plain.c
@@ -1,19 +1,3 @@
-/*
-Copyright 2011,2012,2013 Jun Wako <wakojun@gmail.com>
-
-This program is free software: you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation, either version 2 of the License, or
-(at your option) any later version.
-
-This program is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with this program.  If not, see <http://www.gnu.org/licenses/>.
-*/
 #include "keymap_common.h"
 
 
@@ -33,8 +17,6 @@ const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
      * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
      * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| |      0|  .|   |
      * `-----------------------------------------------------------' `-----------' `---------------'
-     * ; = Fn0(to Layer 5)
-     * / = Fn1(to Layer 6)
      */
     KEYMAP(
     ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,

diff --git a/converter/ps2_usb/keymap_spacefn.c b/converter/ps2_usb/keymap_spacefn.c
new file mode 100644 (file)
index 0000000..6b06bae
--- /dev/null
+++ b/converter/ps2_usb/keymap_spacefn.c
@@ -0,0 +1,61 @@
+/*
+ * SpaceFN layout
+ * http://geekhack.org/index.php?topic=51069.0
+ */
+#include "keymap_common.h"
+
+
+const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    /* 0: default
+     * ,---.   ,---------------. ,---------------. ,---------------. ,-----------.     ,-----------.
+     * |Esc|   |F1 |F2 |F3 |F4 | |F5 |F6 |F7 |F8 | |F9 |F10|F11|F12| |PrS|ScL|Pau|     |Pwr|Slp|Wak|
+     * `---'   `---------------' `---------------' `---------------' `-----------'     `-----------'
+     * ,-----------------------------------------------------------. ,-----------. ,---------------.
+     * |  `|  1|  2|  3|  4|  5|  6|  7|  8|  9|  0|  -|  =|Backspa| |Ins|Hom|PgU| |NmL|  /|  *|  -|
+     * |-----------------------------------------------------------| |-----------| |---------------|
+     * |Tab  |  Q|  W|  E|  R|  T|  Y|  U|  I|  O|  P|  [|  ]|    \| |Del|End|PgD| |  7|  8|  9|   |
+     * |-----------------------------------------------------------| `-----------' |-----------|  +|
+     * |CapsLo|  A|  S|  D|  F|  G|  H|  J|  K|  L|  ;|  '|Return  |               |  4|  5|  6|   |
+     * |-----------------------------------------------------------|     ,---.     |---------------|
+     * |Shift   |  Z|  X|  C|  V|  B|  N|  M|  ,|  ,|  /|Shift     |     |Up |     |  1|  2|  3|   |
+     * |-----------------------------------------------------------| ,-----------. |-----------|Ent|
+     * |Ctrl |Gui |Alt |         Space         |Alt |Gui |Menu|Ctrl| |Lef|Dow|Rig| |      0|  .|   |
+     * `-----------------------------------------------------------' `-----------' `---------------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
+    GRV, 1,   2,   3,   4,   5,   6,   7,   8,   9,   0,   MINS,EQL, BSPC,     INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TAB, Q,   W,   E,   R,   T,   Y,   U,   I,   O,   P,   LBRC,RBRC,BSLS,     DEL, END, PGDN,    P7,  P8,  P9,
+    CAPS,A,   S,   D,   F,   G,   H,   J,   K,   L,   SCLN,QUOT,     ENT,                         P4,  P5,  P6,  PPLS,
+    LSFT,Z,   X,   C,   V,   B,   N,   M,   COMM,DOT, SLSH,          RSFT,          UP,           P1,  P2,  P3,
+    LCTL,LGUI,LALT,          FN0,                     RALT,RGUI,APP, RCTL,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+
+    /* 1: SpaceFN
+     * ,-----------------------------------------------------------.
+     * |`  | F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delete |
+     * |-----------------------------------------------------------|
+     * |     |   |   |   |   |   |   |Hom|Up |End|Psc|Slk|Pau|Ins  |
+     * |-----------------------------------------------------------|
+     * |      |   |   |   |   |   |PgU|Lef|Dow|Rig|   |   |        |
+     * |-----------------------------------------------------------|
+     * |        |   |   |   |   |Spc|PgD|`  |~  |   |   |          |
+     * |-----------------------------------------------------------|
+     * |    |    |    |                        |    |    |    |    |
+     * `-----------------------------------------------------------'
+     */
+    KEYMAP(
+    ESC, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12,           PSCR,SLCK,BRK,
+    GRV, F1,  F2,  F3,  F4,  F5,  F6,  F7,  F8,  F9,  F10, F11, F12, DEL,      INS, HOME,PGUP,    NLCK,PSLS,PAST,PMNS,
+    TRNS,TRNS,TRNS,ESC, TRNS,TRNS,TRNS,HOME,UP,  END, PSCR,SLCK,PAUS,INS,      DEL, END, PGDN,    P7,  P8,  P9,
+    TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PGUP,LEFT,DOWN,RGHT,TRNS,TRNS,     TRNS,                        P4,  P5,  P6,  PPLS,
+    TRNS,TRNS,TRNS,TRNS,TRNS,SPC, PGDN,GRV, FN1, TRNS,TRNS,          TRNS,          UP,           P1,  P2,  P3,
+    TRNS,TRNS,TRNS,          TRNS,                    TRNS,TRNS,TRNS,TRNS,     LEFT,DOWN,RGHT,    P0,       PDOT,PENT
+    ),
+};
+
+const uint16_t PROGMEM fn_actions[] = {
+    [0] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),
+    [1] = ACTION_MODS_KEY(MOD_LSFT, KC_GRV),    // tilde
+};
+