From: Maximilian Friedersdorff Date: Fri, 7 Apr 2017 09:16:19 +0000 (+0100) Subject: Initial commit X-Git-Url: https://git.friedersdorff.com/?a=commitdiff_plain;ds=inline;p=max%2Fservice_cp57cje.git Initial commit --- 15943ed0e0592fa7a96ac54aba16b9f8e6e30d8a diff --git a/services.org b/services.org new file mode 100644 index 0000000..7a712e2 --- /dev/null +++ b/services.org @@ -0,0 +1,70 @@ +#+STARTUP: hidestars showall + +* Todo list +** TODO Check brake disks/pads/drums +** TODO Check brake fluid hoses at the brakes +** TODO Replace the brake fluid +** TODO Replace the auxillary drive belt +** TODO Replace (at least inspect) the timing belt +** TODO Replace the spark plugs +** TODO Check and adjust the camshaft lobe - valve tappet clearances +** TODO Check transmission oil fluid level +** TODO Check suspension components +** TODO Investigate rusted front drivers side shock mount + + +* 2017-03-25 +Issues: +- Oil leak :: puncture in oil filter +- Coolant leak :: leak at the thermostat gasket +Fixes: +- Oil filter change +- Oil change :: This was due anyway +- Sealant added to coolant loop + +* 2017-04-03 +Issues: +- Diluted Coolant :: We only topped up the coolant loop with water in response + to the leak. At least 1L (probably more) was added this way. The corrosion + inhibitors were unacceptably dilute as a result. Corrosion was surely + setting in in the coolant loop. + +Solution: +- Coolant loop flush :: I drained the loop and refilled with water. The drained + coolant contained substantial metal particles, is opaque and has the colour + of pale mud. I assume the concerns about corrosion were justified. The + engine was started and run at ~3000RPM until it reached operating temperature. + This ensures that the thermostat is open and that coolant is circulating + throughout the radiator as well as the engine. The engine was left to + cool and the loop drained once more. +- Coolant change :: New coolant was added. The loop has a capacity of ~5L. For + a dilution of 30%, suitable for temperatures of -20C, 1.5L of coolant + antifreeze was added to the loop and topped up with water. It would have + been better to at least partially dilute the coolant first. It's high + viscosity meant that it took a while to settle in the loop. + +** Notes + There are still some metal particles visible in the coolant expansion tank + (although much reduced from before). An additional flush would be sensible, + but I ran out of containers to contain the discarded coolant. It would perhaps + be sensible to perform the next flush and coolant change ahead of the regular + schedule. + + There is a 0.5L from the second 1L bottle of undiluted coolant left. This is + in the shed diluted to 50/50 antifreeze/water. If the coolant system needs + topping up, I should use that. + +* 2017-04-06 +** Issues + We don't know anything about the car's service history. It is sensible to + assume that all of the standard service intervals are due. +** Solution + I changed the air filter. I only bought a replacement for the intake air filter + but neglected the small filter for the PCV return. This is a small foam filter + sitting at the intake for the PCV hose. This is contaminated with motor oil + and needs to be replaced. Additionally I added a small screw to the intake + duct to the radiator grill. A small plastic protrusion is intended to keep + this duct attached to the air box, which was broken when we bought the car. + The screw takes it's place. + +