From: Haruka Inoue Date: Tue, 23 Jul 2019 01:14:59 +0000 (+0900) Subject: Add PC-8801 Keyboard support. (#620) X-Git-Url: https://git.friedersdorff.com/?a=commitdiff_plain;h=229693e687a912150e9ac17d1eb23032f2305470;p=max%2Ftmk_keyboard.git Add PC-8801 Keyboard support. (#620) * Add PC-8801 Keyboard support. * Add PC-8801 Keyboard support. * Add PC-8801 Keyboard support. --- diff --git a/converter/pc88_usb/Makefile b/converter/pc88_usb/Makefile new file mode 100644 index 00000000..c6af9735 --- /dev/null +++ b/converter/pc88_usb/Makefile @@ -0,0 +1,101 @@ +# Target file name (without extension). +TARGET ?= pc88_usb + +# Directory common source filess exist +TMK_DIR ?= ../../tmk_core + +# Directory keyboard dependent files exist +TARGET_DIR ?= . + +# keyboard dependent files +# Add one of lines below to select serial protocol implementation +# protocol/serial_uart.c +# protocol/serial_soft.c +SRC ?= matrix.c \ + protocol/serial_uart.c + +CONFIG_H ?= config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +MCU ?= atmega32u2 # TMK Converter + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU ?= 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH ?= AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB ?= $(F_CPU) + +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Build Options +# *Comment out* to disable the options. +# +MOUSEKEY_ENABLE ?= yes # Mouse keys +EXTRAKEY_ENABLE ?= yes # Audio control and System control +CONSOLE_ENABLE ?= yes # Console for debug +COMMAND_ENABLE ?= yes # Commands for debug and configuration +#NKRO_ENABLE ?= yes # USB Nkey Rollover +##UNIMAP_ENABLE ?= yes + + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# +# Keymap file +# +ifeq (yes,$(strip $(UNIMAP_ENABLE))) + KEYMAP_FILE = unimap +else + ifeq (yes,$(strip $(ACTIONMAP_ENABLE))) + KEYMAP_FILE = actionmap + else + KEYMAP_FILE = keymap + endif +endif +ifdef KEYMAP + SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC) +else + SRC := $(KEYMAP_FILE).c $(SRC) +endif + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TMK_DIR) + + +include $(TMK_DIR)/protocol/lufa.mk +include $(TMK_DIR)/protocol.mk +include $(TMK_DIR)/common.mk +include $(TMK_DIR)/rules.mk diff --git a/converter/pc88_usb/Makefile.32u4 b/converter/pc88_usb/Makefile.32u4 new file mode 100644 index 00000000..c27f1261 --- /dev/null +++ b/converter/pc88_usb/Makefile.32u4 @@ -0,0 +1,4 @@ +TARGET ?= pc88_usb_32u4 +MCU ?= atmega32u4 + +include Makefile diff --git a/converter/pc88_usb/Makefile.unimap b/converter/pc88_usb/Makefile.unimap new file mode 100644 index 00000000..da526033 --- /dev/null +++ b/converter/pc88_usb/Makefile.unimap @@ -0,0 +1,101 @@ +# Target file name (without extension). +TARGET ?= pc88_usb_unimap + +# Directory common source filess exist +TMK_DIR ?= ../../tmk_core + +# Directory keyboard dependent files exist +TARGET_DIR ?= . + +# keyboard dependent files +# Add one of lines below to select serial protocol implementation +# protocol/serial_uart.c +# protocol/serial_soft.c +SRC ?= matrix.c \ + protocol/serial_uart.c + +CONFIG_H ?= config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +MCU ?= atmega32u2 # TMK Converter + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU ?= 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH ?= AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB ?= $(F_CPU) + +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Build Options +# *Comment out* to disable the options. +# +MOUSEKEY_ENABLE ?= yes # Mouse keys +EXTRAKEY_ENABLE ?= yes # Audio control and System control +CONSOLE_ENABLE ?= yes # Console for debug +COMMAND_ENABLE ?= yes # Commands for debug and configuration +#NKRO_ENABLE ?= yes # USB Nkey Rollover +UNIMAP_ENABLE ?= yes + + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# +# Keymap file +# +ifeq (yes,$(strip $(UNIMAP_ENABLE))) + KEYMAP_FILE = unimap +else + ifeq (yes,$(strip $(ACTIONMAP_ENABLE))) + KEYMAP_FILE = actionmap + else + KEYMAP_FILE = keymap + endif +endif +ifdef KEYMAP + SRC := $(KEYMAP_FILE)_$(KEYMAP).c $(SRC) +else + SRC := $(KEYMAP_FILE).c $(SRC) +endif + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TMK_DIR) + + +include $(TMK_DIR)/protocol/lufa.mk +include $(TMK_DIR)/protocol.mk +include $(TMK_DIR)/common.mk +include $(TMK_DIR)/rules.mk diff --git a/converter/pc88_usb/Makefile.unimap.32u4 b/converter/pc88_usb/Makefile.unimap.32u4 new file mode 100644 index 00000000..11ab3ad7 --- /dev/null +++ b/converter/pc88_usb/Makefile.unimap.32u4 @@ -0,0 +1,4 @@ +TARGET ?= pc88_usb_32u4_unimap +MCU ?= atmega32u4 + +include Makefile.unimap diff --git a/converter/pc88_usb/README b/converter/pc88_usb/README new file mode 100644 index 00000000..eba21118 --- /dev/null +++ b/converter/pc88_usb/README @@ -0,0 +1,73 @@ +PC88(Late type) to USB keyboard protocol converter +======================================= +Target MCU is ATMega32u2 but other USB capable AVR will also work. + + +README FIRST +--------- +This converter is for TYPE-B keyboard. For keyboards other than TYPE-B, +change the mode switch on the back of the keyboard. + +Stand the left foot on the back of the keyboard and there are two slits. +There is a mode change switch in the back of it. + +When this switch is up, TYPE-B mode is set. + +When connecting a keyboard to this adapter, be sure to set to TYPE-B mode. + + + +Connector +--------- +On host/converter: + + 5Pin mini DIN + ___ ___ + / |_| \ + / 5 4 \ + | 3 | 2 | + \_ 1 _/ + \_____/ + (receptacle) + + +Wiring: You can change this with editing config.h. + + Pin mini DIN MCU + ---------------------------------- + 1 5V VCC + 2 GND GND + 3 DATA RD2 + 4 NC + 5 NC + + + + +Protocol +-------- +Signal: Asynchronous, Positive logic, 20800bps, Least bit first +Frame format: 1-Start bit(Lo), 8-Data bits, non-Parity, 1-Stop bit + + + +Build Firmware +-------------- +Just use 'make' to bild firmware for TMK PC88 converter. + + $ make -f Makefile.unimap clean + $ make -f Makefile.unimap + +To flash firmware + + $ make -f Makefile.unimap dfu + +then push button on converter to flash firmware. + +If you are using ATMega32u4 based board instead of premade TMK PC88 converter(ATMega32u2) use following commands. + + $ make -f Makefile.unimap.32u4 clean + $ make -f Makefile.unimap.32u4 + $ make -f Makefile.unimap.32u4 dfu + + diff --git a/converter/pc88_usb/config.h b/converter/pc88_usb/config.h new file mode 100644 index 00000000..97ae6e3d --- /dev/null +++ b/converter/pc88_usb/config.h @@ -0,0 +1,121 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x8801 +#define DEVICE_VER 0x0101 +#define MANUFACTURER t.m.k. +#define PRODUCT PC88 keyboard converter +#define DESCRIPTION converts PC88 keyboard protocol into USB + + +/* matrix size */ +#define MATRIX_ROWS 16 +#define MATRIX_COLS 8 + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->keys[0] == KC_STOP || \ + keyboard_report->mods == (MOD_BIT(KC_LALT) | MOD_BIT(KC_RALT)) \ +) + + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + + +/* + * PC88 Serial(USART) configuration + * asynchronous, positive logic, 20800baud, bit order: LSB first + * 1-start bit, 8-data bit, non parity, 1-stop bit + */ + +/* + * Software Serial + * Add protocol/serial_soft.c to SRC in Makefile + */ +#define SERIAL_SOFT_BAUD 20800 +#define SERIAL_SOFT_PARITY_NONE +#define SERIAL_SOFT_BIT_ORDER_LSB +#define SERIAL_SOFT_LOGIC_POSITIVE +/* RXD Port */ +#define SERIAL_SOFT_RXD_DDR DDRD +#define SERIAL_SOFT_RXD_PORT PORTD +#define SERIAL_SOFT_RXD_PIN PIND +#define SERIAL_SOFT_RXD_BIT 2 +#define SERIAL_SOFT_RXD_READ() (SERIAL_SOFT_RXD_PIN&(1<>8); /* baud rate */ \ + UCSR1B |= (1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include +#include "keycode.h" +#include "action.h" +#include "util.h" +#include "serial.h" +#include "keymap.h" + + + + +// Following macros help you to define a keymap with the form of actual keyboard layout. + +/* Keyboard Scan codes + * ,---. ,---. ,------------------------. ,------------------------. ,-------. + * | 60| | 61| | 62 | 63 | 64 | 65 | 66 | | 67 | 68 | 69 | 6A | 6B | | 36| 37| + * `---' `---' `------------------------' `------------------------' `-------' + * ,---------------------------------------------------------------. ,-------. ,---------------. + * | 00 | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E | | 38| 39| | 3E| 3F| 4D| 41| + * |---------------------------------------------------------------| `-------' |---------------| + * | 0F | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| | | 42| 43| 44| 45| + * |--------------------------------------------------------` 1C | ,-------. |---------------| + * | 74| 71| 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| | | 3A | | 46| 47| 48| 49| + * |---------------------------------------------------------------| |-------| |---------------| + * | 70 | 29| 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 78 | | 3B| 3C| | 4A| 4B| 4C| 4D| + * `---------------------------------------------------------------' |-------| |---------------| + * | 72| 73| 51 | 34 | 35 | 7A| 7B| | 3D | | 4E| 4F| 50| 79| + * `-------------------------------------------' `-------' `---------------' + */ + +#define KEYMAP( \ + K60, K61, K62, K63, K64, K65, K66, K67, K68, K69, K6A, K6B, K36, K37, \ + K00, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, K0B, K0C, K0D, K0E, K38, K39, K3E, K3F, K40, K41, \ + K0F, K10, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, K1B, K1C, K42, K43, K44, K45, \ + K74, K71, K1D, K1E, K1F, K20, K21, K22, K23, K24, K25, K26, K27,K28, K3A, K46, K47, K48, K49, \ + K70, K29, K2A, K2B, K2C, K2D, K2E, K2F, K30, K31, K32, K33, K78, K3B, K3C, K4A, K4B, K4C, K4D, \ + K72, K73, K51, K34, K35, K7A, K7B, K3D, K4E, K4F, K50, K79 \ +) { \ + { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ + { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \ + { KC_##K10, KC_##K11, KC_##K12, KC_##K13, KC_##K14, KC_##K15, KC_##K16, KC_##K17 }, \ + { KC_##K18, KC_##K19, KC_##K1A, KC_##K1B, KC_##K1C, KC_##K1D, KC_##K1E, KC_##K1F }, \ + { KC_##K20, KC_##K21, KC_##K22, KC_##K23, KC_##K24, KC_##K25, KC_##K26, KC_##K27 }, \ + { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \ + { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_##K35, KC_##K36, KC_##K37 }, \ + { KC_##K38, KC_##K39, KC_##K3A, KC_##K3B, KC_##K3C, KC_##K3D, KC_##K3E, KC_##K3F }, \ + { KC_##K40, KC_##K41, KC_##K42, KC_##K43, KC_##K44, KC_##K45, KC_##K46, KC_##K47 }, \ + { KC_##K48, KC_##K49, KC_##K4A, KC_##K4B, KC_##K4C, KC_##K4D, KC_##K4E, KC_##K4F }, \ + { KC_##K50, KC_##K51, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_##K60, KC_##K61, KC_##K62, KC_##K63, KC_##K64, KC_##K65, KC_##K66, KC_##K67 }, \ + { KC_##K68, KC_##K69, KC_##K6A, KC_##K6B, KC_NO, KC_NO, KC_NO, KC_NO }, \ + { KC_##K70, KC_##K71, KC_##K72, KC_##K73, KC_##K74, KC_NO, KC_NO, KC_NO }, \ + { KC_##K78, KC_##K79, KC_##K7A, KC_##K7B, KC_NO, KC_NO, KC_NO, KC_NO } \ +} + + +const action_t fn_actions[] PROGMEM = { + [0] = ACTION_FUNCTION(0), // toggle all LEDs +}; + +void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) +{ + static bool led = false; + switch (id) { + case 0: + if (record->event.pressed) { + if ((led = !led)) + serial_send(0x80); // all on + else + serial_send(0xff); // all off + } + break; + } +} + + +const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { +/* Keyboard Scan codes + * ,---. ,---. ,------------------------. ,------------------------. ,-------. + * | 60| | 61| | 62 | 63 | 64 | 65 | 66 | | 67 | 68 | 69 | 6A | 6B | | 36| 37| + * `---' `---' `------------------------' `------------------------' `-------' + * ,---------------------------------------------------------------. ,-------. ,---------------. + * | 00 | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E | | 38| 39| | 3E| 3F| 4D| 41| + * |---------------------------------------------------------------| `-------' |---------------| + * | 0F | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| | | 42| 43| 44| 45| + * |--------------------------------------------------------` 1C | ,-------. |---------------| + * | 74| 71| 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| | | 3A | | 46| 47| 48| 49| + * |---------------------------------------------------------------| |-------| |---------------| + * | 70 | 29| 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 78 | | 3B| 3C| | 4A| 4B| 4C| 4D| + * `---------------------------------------------------------------' |-------| |---------------| + * | 72| 73| 51 | 34 | 35 | 7A| 7B| | 3D | | 4E| 4F| 50| 79| + * `-------------------------------------------' `-------' `---------------' + */ + /* ANSI */ + KEYMAP( + PAUS,PSCR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, PGDN,PGUP, + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, BSLS,BSPC, INS, DEL, HOME, END,PMNS,PSLS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, P7, P8, P9, PAST, + LCTL,LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT,F18, UP, P4, P5, P6, PPLS, + LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,GRV, RSFT, LEFT,RGHT, P1, P2, P3, PEQL, + F19, LGUI,LALT, SPC, RALT, APP, RGUI, DOWN, P0, PCMM,PDOT,PENT + ), + /* JIS */ + KEYMAP( + PAUS, PSCR, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, PGDN,PGUP, + ESC, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS, EQL, JYEN,BSPC, INS, DEL, HOME, END,PMNS,PSLS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, ENT, P7, P8, P9, PAST, + LCTL,LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT,NUHS, UP, P4, P5, P6, PPLS, + LSFT, Z, X, C, V, B, N, M, COMM,DOT, SLSH,RO, RSFT, LEFT,RGHT, P1, P2, P3, PEQL, + KANA,LALT,MHEN, SPC, HENK, RGUI,ZKHK, DOWN, P0, PCMM,PDOT,PENT + ), +}; diff --git a/converter/pc88_usb/matrix.c b/converter/pc88_usb/matrix.c new file mode 100644 index 00000000..4fb10bd1 --- /dev/null +++ b/converter/pc88_usb/matrix.c @@ -0,0 +1,95 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include +#include +#include +#include +#include "print.h" +#include "util.h" +#include "matrix.h" +#include "led.h" +#include "debug.h" +#include "protocol/serial.h" + + +/* + * Matrix Array usage: + * + * ROW: 16(4bits) + * COL: 8(3bits) + * + * 8bit wide + * +---------+ + * 0|00 ... 07| + * 1|08 ... 0F| + * :| ... | + * :| ... | + * E|70 ... 77| + * F|78 ... 7F| + * +---------+ + */ +static uint8_t matrix[MATRIX_ROWS]; +#define ROW(code) ((code>>3)&0xF) +#define COL(code) (code&0x07) + +void matrix_init(void) +{ + debug_keyboard = true; + + serial_init(); + + // initialize matrix state: all keys off + for (uint8_t i=0; i < MATRIX_ROWS; i++) matrix[i] = 0x00; + + print("matrix_init done.\n"); + return; +} + +uint8_t matrix_scan(void) +{ + uint16_t code; + code = serial_recv2(); + if (code == -1) { + return 0; + } + + print_hex8(code); print(" "); + + if (code&0x80) { + // break code + if (matrix_is_on(ROW(code), COL(code))) { + matrix[ROW(code)] &= ~(1< + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#include "unimap_trans.h" + + +#define AC_FN0 ACTION_LAYER_MOMENTARY(1) + +#ifdef KEYMAP_SECTION_ENABLE +const action_t actionmaps[][UNIMAP_ROWS][UNIMAP_COLS] __attribute__ ((section (".keymap.keymaps"))) = { +#else +const action_t actionmaps[][UNIMAP_ROWS][UNIMAP_COLS] PROGMEM = { +#endif + UNIMAP( + F13, F14, F15, F16, F17, F18, F19, F20, F21, F22, F23, F24, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, PSCR,SLCK,PAUS, VOLD,VOLU,MUTE, + GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, JYEN,BSPC, INS, HOME,PGUP, NLCK,PSLS,PAST,PMNS, + TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, BSLS, DEL, END, PGDN, P7, P8, P9, PPLS, + CAPS,A, S, D, F, G, H, J, K, L, SCLN,QUOT, NUHS,ENT, P4, P5, P6, COMM, + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, RO, RSFT, UP, P1, P2, P3, PENT, + LCTL,LGUI,LALT,MHEN, SPC, HENK,KANA,RALT,RGUI,FN0, RCTL, LEFT,DOWN,RGHT, P0, DOT, PEQL + ), + UNIMAP( + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, + GRV, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS, + ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, INS, DEL, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,PSCR,SLCK,PAUS,UP, INS, TRNS, TRNS,TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,VOLD,VOLU,MUTE,TRNS,TRNS,TRNS,TRNS,HOME,PGUP,LEFT,RGHT, TRNS,TRNS, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,TRNS,END, PGDN,DOWN, TRNS,TRNS, PGUP, TRNS,TRNS,TRNS,TRNS, + TRNS,TRNS,TRNS,TRNS, TRNS, TRNS,TRNS,TRNS,TRNS,TRNS,TRNS, HOME,PGDN,END, TRNS, TRNS,TRNS + ), +}; diff --git a/converter/pc88_usb/unimap_trans.h b/converter/pc88_usb/unimap_trans.h new file mode 100644 index 00000000..80f669f2 --- /dev/null +++ b/converter/pc88_usb/unimap_trans.h @@ -0,0 +1,64 @@ +/* +Copyright 2018 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ +#ifndef _TRANS_H +#define _TRANS_H + +#include +#include +#include "unimap.h" + + +/* Mapping PC88 scan codes to UNIMAP layout codes + * + * PC88 scan codes + * ,---. ,---. ,------------------------. ,------------------------. ,-------. + * | 60| | 61| | 62 | 63 | 64 | 65 | 66 | | 67 | 68 | 69 | 6A | 6B | | 36| 37| + * `---' `---' `------------------------' `------------------------' `-------' + * ,---------------------------------------------------------------. ,-------. ,---------------. + * | 00 | 01| 02| 03| 04| 05| 06| 07| 08| 09| 0A| 0B| 0C| 0D| 0E | | 38| 39| | 3E| 3F| 4D| 41| + * |---------------------------------------------------------------| `-------' |---------------| + * | 0F | 10| 11| 12| 13| 14| 15| 16| 17| 18| 19| 1A| 1B| | | 42| 43| 44| 45| + * |--------------------------------------------------------` 1C | ,-------. |---------------| + * | 74| 71| 1D| 1E| 1F| 20| 21| 22| 23| 24| 25| 26| 27| 28| | | 3A | | 46| 47| 48| 49| + * |---------------------------------------------------------------| |-------| |---------------| + * | 70 | 29| 2A| 2B| 2C| 2D| 2E| 2F| 30| 31| 32| 33| 78 | | 3B| 3C| | 4A| 4B| 4C| 4D| + * `---------------------------------------------------------------' |-------| |---------------| + * | 72| 73| 51 | 34 | 35 | 7A| 7B| | 3D | | 4E| 4F| 50| 79| + * `-------------------------------------------' `-------' `---------------' + * + * + */ +const uint8_t PROGMEM unimap_trans[MATRIX_ROWS][MATRIX_COLS] = { + { UNIMAP_ESC, UNIMAP_1, UNIMAP_2, UNIMAP_3, UNIMAP_4, UNIMAP_5, UNIMAP_6, UNIMAP_7 }, /* 00-07 */ + { UNIMAP_8, UNIMAP_9, UNIMAP_0, UNIMAP_MINS, UNIMAP_EQL, UNIMAP_JYEN, UNIMAP_BSPC, UNIMAP_TAB }, /* 08-0F */ + { UNIMAP_Q, UNIMAP_W, UNIMAP_E, UNIMAP_R, UNIMAP_T, UNIMAP_Y, UNIMAP_U, UNIMAP_I }, /* 10-17 */ + { UNIMAP_O, UNIMAP_P, UNIMAP_LBRC, UNIMAP_RBRC, UNIMAP_ENT, UNIMAP_A, UNIMAP_S, UNIMAP_D }, /* 18-1F */ + { UNIMAP_F, UNIMAP_G, UNIMAP_H, UNIMAP_J, UNIMAP_K, UNIMAP_L, UNIMAP_SCLN, UNIMAP_QUOT }, /* 20-27 */ + { UNIMAP_BSLS, UNIMAP_Z, UNIMAP_X, UNIMAP_C, UNIMAP_V, UNIMAP_B, UNIMAP_N, UNIMAP_M }, /* 28-2F */ + { UNIMAP_COMM, UNIMAP_DOT, UNIMAP_SLSH, UNIMAP_RO, UNIMAP_SPC, UNIMAP_HENK, UNIMAP_PGDN, UNIMAP_PGUP }, /* 30-37 */ + { UNIMAP_INS, UNIMAP_DEL, UNIMAP_UP, UNIMAP_LEFT, UNIMAP_RGHT, UNIMAP_DOWN, UNIMAP_HOME, UNIMAP_END }, /* 38-3F */ + { UNIMAP_PMNS, UNIMAP_PSLS, UNIMAP_P7, UNIMAP_P8, UNIMAP_P9, UNIMAP_PAST, UNIMAP_P4, UNIMAP_P5 }, /* 40-47 */ + { UNIMAP_P6, UNIMAP_PPLS, UNIMAP_P1, UNIMAP_P2, UNIMAP_P3, UNIMAP_PEQL, UNIMAP_P0, UNIMAP_PCMM }, /* 48-4F */ + { UNIMAP_PDOT, UNIMAP_MHEN, UNIMAP_F11, UNIMAP_F12, UNIMAP_F13, UNIMAP_F14, UNIMAP_F15, UNIMAP_NO }, /* 50-57 */ + { UNIMAP_F21, UNIMAP_F22, UNIMAP_F23, UNIMAP_F24, UNIMAP_NO, UNIMAP_NO, UNIMAP_APP, UNIMAP_NO }, /* 58-5F */ + { UNIMAP_PAUS, UNIMAP_PSCR, UNIMAP_F1, UNIMAP_F2, UNIMAP_F3, UNIMAP_F4, UNIMAP_F5, UNIMAP_F6 }, /* 60-67 */ + { UNIMAP_F7, UNIMAP_F8, UNIMAP_F9, UNIMAP_F10, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* 68-6F */ + { UNIMAP_LSFT, UNIMAP_CAPS, UNIMAP_KANA, UNIMAP_LALT, UNIMAP_LCTL, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO }, /* 70-77 */ + { UNIMAP_RSFT, UNIMAP_PENT, UNIMAP_RGUI, UNIMAP_GRV, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO, UNIMAP_NO } /* 78-7F */ +}; + +#endif