From: tmk Date: Tue, 6 Dec 2016 02:56:21 +0000 (+0900) Subject: Add keyboard/kl27z_kbd X-Git-Url: https://git.friedersdorff.com/?a=commitdiff_plain;h=2d0e02efe096cdfd7b5c147f763f9bd343330d9d;p=max%2Ftmk_keyboard.git Add keyboard/kl27z_kbd --- diff --git a/keyboard/kl27z_kbd/Makefile b/keyboard/kl27z_kbd/Makefile new file mode 100644 index 00000000..369054f1 --- /dev/null +++ b/keyboard/kl27z_kbd/Makefile @@ -0,0 +1,70 @@ +# Target file name (without extension). +PROJECT = kl27z_kbd + +# Directory common source files exist +TMK_DIR = ../../tmk_core + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# project specific files +SRC = $(PROJECT).c + +CONFIG_H = config.h + +## chip/board settings +# - the next two should match the directories in +# /os/hal/ports/$(MCU_FAMILY)/$(MCU_SERIES) +# - For Teensies, FAMILY = KINETIS and SERIES is either +# KL2x (LC) or K20x (3.0,3.1,3.2). +MCU_FAMILY = KINETIS +MCU_SERIES = KL2x + +# Linker script to use +# - it should exist either in /os/common/ports/ARMCMx/compilers/GCC/ld/ +# or /ld/ +# - NOTE: a custom ld script is needed for EEPROM on Teensy LC +# - LDSCRIPT = +# - MKL26Z64 for Teensy LC +# - MK20DX128 for Teensy 3.0 +# - MK20DX256 for Teensy 3.1 and 3.2 +MCU_LDSCRIPT = MKL27Z256 + +# Startup code to use +# - it should exist in /os/common/ports/ARMCMx/compilers/GCC/mk/ +# - STARTUP = +# - kl2x for Teensy LC +# - k20x5 for Teensy 3.0 +# - k20x7 for Teensy 3.1 and 3.2 +MCU_STARTUP = kl2x + +# Board: it should exist either in /os/hal/boards/ +# or /boards +# - BOARD = +# - PJRC_TEENSY_LC for Teensy LC +# - PJRC_TEENSY_3 for Teensy 3.0 +# - PJRC_TEENSY_3_1 for Teensy 3.1 or 3.2 +BOARD = ELF + +# Cortex version +# Teensy LC is cortex-m0plus; Teensy 3.x are cortex-m4 +MCU = cortex-m0plus + +# ARM version, CORTEX-M0/M1 are 6, CORTEX-M3/M4/M7 are 7 +# I.e. 6 for Teensy LC; 7 for Teensy 3.x +ARMV = 6 + +# Build Options +# comment out to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration +## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.) +#MOUSEKEY_ENABLE = yes # Mouse keys +EXTRAKEY_ENABLE = yes # Audio control and System control +CONSOLE_ENABLE = yes # Console for debug +#COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover + +include $(TMK_DIR)/tool/chibios/common.mk +include $(TMK_DIR)/tool/chibios/chibios.mk diff --git a/keyboard/kl27z_kbd/Matrix.txt b/keyboard/kl27z_kbd/Matrix.txt new file mode 100644 index 00000000..05d3a5da --- /dev/null +++ b/keyboard/kl27z_kbd/Matrix.txt @@ -0,0 +1,34 @@ +COL +--- +Anode side, senses keys with internal pull-up. + +Left to right: + + PTD6 + PTD5 + PTD4 + PTD3 + + PTA19 + PTA18 + PTA4 NMI + PTA2 + PTA1 + + PTE25 + PTE24 + PTE30 + PTE29 + PTE21 + +ROW +---- +Cathod side, given strobe with output low. + +Top to bottom: + + PTB3 + PTB16 + PTB17 + PTC0 + PTC1 diff --git a/keyboard/kl27z_kbd/README.md b/keyboard/kl27z_kbd/README.md new file mode 100644 index 00000000..b10e4b37 --- /dev/null +++ b/keyboard/kl27z_kbd/README.md @@ -0,0 +1,161 @@ +KL27Z128/256 board +================== +2016/11/30 + +KL27Z is configured to use internal 48MHz RC oscillator. + +The board has push button on PTA4 and LED on PTD7. The button works as 'a' key and the LED as an indicator for capslock. + + +ELF board +--------- +This board acommodates 48QFN chip. + +### prototypte pinout +- pcb layout https://deskthority.net/resources/image/33293 +- schematic https://deskthority.net/resources/image/33252 + + +``` + G G + N 5 D D N F D D D D D D + D V - + D G \ USB / 6 5 4 3 2 1 + ,--------------------- | Conn | --------------------. + |39 40 41 42 43 44 | | 1 2 3 4 5 6 | + 3.3V|38 |_________| 7 |D0 + A0|37 RST 8 |C7 + A3|36 9 |C6 + +A20|35 10|C5+ + E20|34 11|C4 + E21|33 BL 12|C3 + E29|32 13|C2 + |31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16 15 14| + `-------------------------------------------------------' + E E E A A A 3 A G A C B B B B B C C + 3 2 2 1 2 4 . 1 N 1 1 1 2 3 1 1 0 1 + 0 4 5 + + 3V 8 D 9 6 7 + + + 1 PTD6 12 PTC3 23 GND 34 PTE20* + 2 PTD5 13 PTC2 24 PTA18 35 PTA20/Reset+ + 3 PTD4 14 PTC1 25 3.3V 36 PTA3/SWD_DIO + 4 PTD3* 15 PTC0* 26 PTA4/NMI+ 37 PTA0/SWD_CLK + 5 PTD2* 16 PTB17* 27 PTA2 38 3.3V + 6 PTD1* 17 PTB16* 28 PTA1+ 39 GND + 7 PTD0* 18 PTB3* 29 PTE25* 40 VBUS/VREGIN/5V + 8 PTC7 19 PTB2* 30 PTE24* 41 USB D- + 9 PTC6 20 PTB1 31 PTE30 42 USB D+ + 10 PTC5+ 21 PTB0 32 PTE29* 43 GND + 11 PTC4 22 PTA19 33 PTE21* 44 USB Shield/FB + +: Pins with resistor or switch + *: Pins which don't exist in QFN32 +``` + + +TMK KL27Z breakout +------------------ +This board acommodates 48QFN chip. + +### Pinputs + + _\ conn /_ + 1 28 + : : + : PROG : + : RST : + 14 15 + ---------- + + 1 VUSB 28 GND + 2 VIN/VREGIN 27 PTD4 + 3 PTD5 26 PTC7 + 4 PTD6 25 PTC6 + 5 PTD7 24 PTC5+ + 6 PTE0* 23 PTC4 + + 7 3.3V 22 GND + 8 PTE30 21 PTC3 + 9 PTA0/SWD_CLK 20 PTC2 + 10 PTA1+ 19 PTC1 + 11 PTA2 18 PTB1 + 12 PTA3/SWD_DIO 17 PTB0 + 13 PTA4/NMI+ 16 PTA20/Reset+ + 14 PTA18 15 PTA19 + *: Pin which doesn't exist in QFN48 + + +#### Pinouts difference between 32QFN and 48QFN +48QFN doesn't have PTE0 +32QFN doesn't have PTD0-3, PTC0, PTE20-21,24,25,29, PTB2-3,16,17 + +### ROM bootloader pins +See Reference Manual Chapter 13. + + PTA2 LPUART0_TX + PTA1 LPUART0_RX * + PTB0 I2C0_SCL + PTB1 I2C0_SDA + PTC4 SPI0_SS_b * + PTC7 SPI0_MISO + PTC6 SPI0_MOSI + PTC5 SPI0_SCK * + +Due to errata e9457, need to pull-up `SPI0_SS_b`(or `SPI0_SCK`) to prevent false detection of SPI. +The errata doesn't refer UART though, `LPUART0_RX` also requires pull-up or down resisitor from experience. +Without resistor it easily false-detects activity on UART interface with finger touch on the pin. + + + + +Resources +--------- +### Deskthority thread +https://deskthority.net/workshop-f7/can-we-design-the-teensy-alternative-for-keyboards-t13662-510.html + +### Kinetis KL2x +http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/kinetis-cortex-m-mcus/l-series-ultra-low-power-m0-plus/kinetis-kl2x-48-mhz-usb-ultra-low-power-microcontrollers-based-on-arm-cortex-m0-plus:KL2x + +### KL27Z128/256 Data Sheet +http://www.nxp.com/assets/documents/data/en/data-sheets/KL27P64M48SF6.pdf + +### KL27Z128/256 Reference Manual +http://www.nxp.com/assets/documents/data/en/reference-manuals/KL27P64M48SF6RM.pdf + +### Errata +http://www.nxp.com/assets/documents/data/en/errata/KINETIS_L_1N71K.pdf + +>> +e9457: Kinetis Flashloader/ ROM Bootloader: The peripheral auto-detect code in +bootloader can falsely detect presence of SPI host causing non-responsive +bootloader +Description: During the active peripheral detection process, the bootloader can interpret spurious data on +the SPI peripheral as valid data. The spurious data causes the bootloader to shutdown all +peripherals except the “falsely detected" SPI and enter the command phase loop using the +SPI. After the bootloader enters the command phase loop using the SPI, the other peripherals +are ignored, so the desired peripheral is no longer active. +The bootloader will not falsely detect activity on the I2C, UART, or USB interfaces, so only the +SPI interface is affected. +Workaround: Ensure that there is an external pull-up on the SPI chip-select pin or that the pin is driven high. +This will prevent the bootloader from seeing spurious data due to activity on the SPI clock pin. + +### Kinetis Bootloader and blhost +http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/kinetis-cortex-m-mcus/kinetis-symbols-footprints-and-models/kinetis-bootloader:KBOOT + + +Build +----- + + make + + +Program +------- +Flash firmware with ROM bootloader. + + blhost -u -- flash-image build/kl27z.hex erase + + +TODO +---- +- Fix boards/ELF files +- add macro `USBx_CTL_RESUME` to ChibiOS-Contrib/os/common/ext/CMSIS/KINETIS/kl27zxxx.h diff --git a/keyboard/kl27z_kbd/boards/ELF/board.c b/keyboard/kl27z_kbd/boards/ELF/board.c new file mode 100644 index 00000000..bf8c4686 --- /dev/null +++ b/keyboard/kl27z_kbd/boards/ELF/board.c @@ -0,0 +1,158 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#include "ch.h" +#include "hal.h" + +#if HAL_USE_PAL || defined(__DOXYGEN__) +/** + * @brief PAL setup. + * @details Digital I/O ports static configuration as defined in @p board.h. + * This variable is used by the HAL when initializing the PAL driver. + */ +const PALConfig pal_default_config = +{ + .ports = { + { + /* + * PORTA setup. + * + * on pads: PTA1, PTA2, PTA5, PTA18, PTA19 + * + * PTA0/3 SWD (default SWD, ALT_7: SWD, ALT_1: PTA0/3) + * PTA4 NMI button (default NMI_b, ALT_1: PTA4) + * PTA20 RESET button (default RESET, ALT_7: RESET, ALT_1: PTA20) + */ + .port = IOPORT1, + .pads = { + PAL_MODE_ALTERNATIVE_7, PAL_MODE_INPUT_PULLUP, PAL_MODE_OUTPUT_PUSHPULL, + PAL_MODE_ALTERNATIVE_7, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_INPUT_ANALOG, PAL_MODE_INPUT_ANALOG, PAL_MODE_ALTERNATIVE_7, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + }, + }, + { + /* + * PORTB setup. + * + * on pads: PTB0, PTB1 + * LED: PTB18 + */ + .port = IOPORT2, + .pads = { + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + }, + }, + { + /* + * PORTC setup. + * + * on pads: PTC1, PTC2, PTC3, PTC6, PTC7, PTC8, PTC9 + */ + .port = IOPORT3, + .pads = { + PAL_MODE_UNCONNECTED, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, + PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, + PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + }, + }, + { + /* + * PORTD setup. + * + * on pads: PTD0 - PTD7 + */ + .port = IOPORT4, + .pads = { + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, + PAL_MODE_INPUT_PULLUP, PAL_MODE_OUTPUT_PUSHPULL, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + }, + }, + { + /* + * PORTE setup. + * + * on pads: PTE0, PTE1, PTE24, PTE25, PTE29, PTE30 + */ + .port = IOPORT5, + .pads = { + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_OUTPUT_PUSHPULL, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, + PAL_MODE_INPUT_PULLUP, PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, + PAL_MODE_UNCONNECTED, PAL_MODE_UNCONNECTED, PAL_MODE_INPUT_PULLUP, + PAL_MODE_INPUT_PULLUP, PAL_MODE_UNCONNECTED, + }, + }, + }, +}; +#endif + +/** + * @brief Early initialization code. + * @details This initialization must be performed just after stack setup + * and before any other initialization. + */ +void __early_init(void) { + + kl2x_clock_init(); +} + +/** + * @brief Board-specific initialization code. + * @todo Add your board-specific code, if any. + */ +void boardInit(void) { +} diff --git a/keyboard/kl27z_kbd/boards/ELF/board.h b/keyboard/kl27z_kbd/boards/ELF/board.h new file mode 100644 index 00000000..8f6fec45 --- /dev/null +++ b/keyboard/kl27z_kbd/boards/ELF/board.h @@ -0,0 +1,56 @@ +/* + ChibiOS - (C) 2015-2016 flabbergast + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _BOARD_H_ +#define _BOARD_H_ + +/* + * Setup for a custom KL27Z breakout board. + */ + +/* + * Board identifier. + */ +#define BOARD_KL27Z_BREAKOUT +#define BOARD_NAME "Custom KL27Z breakout" + +/* + * MCU type + */ +#define KL27Zxxx + +/* + * Onboard features. + */ +//#define GPIO_LED IOPORT1 +//#define PIN_LED 2 +// PTD7 on ELF +#define GPIO_LED IOPORT4 +#define PIN_LED 7 +#define GPIO_BUTTON IOPORT1 +#define PIN_BUTTON 4 + +#if !defined(_FROM_ASM_) +#ifdef __cplusplus +extern "C" { +#endif + void boardInit(void); +#ifdef __cplusplus +} +#endif +#endif /* _FROM_ASM_ */ + +#endif /* _BOARD_H_ */ diff --git a/keyboard/kl27z_kbd/boards/ELF/board.mk b/keyboard/kl27z_kbd/boards/ELF/board.mk new file mode 100644 index 00000000..f0c8b4b3 --- /dev/null +++ b/keyboard/kl27z_kbd/boards/ELF/board.mk @@ -0,0 +1,5 @@ +# List of all the board related files. +BOARDSRC = ./boards/ELF/board.c + +# Required include directories +BOARDINC = ./boards/ELF diff --git a/keyboard/kl27z_kbd/chconf.h b/keyboard/kl27z_kbd/chconf.h new file mode 100644 index 00000000..cb36996c --- /dev/null +++ b/keyboard/kl27z_kbd/chconf.h @@ -0,0 +1,524 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/chconf.h + * @brief Configuration file template. + * @details A copy of this file must be placed in each project directory, it + * contains the application specific kernel settings. + * + * @addtogroup config + * @details Kernel related settings and hooks. + * @{ + */ + +#ifndef CHCONF_H +#define CHCONF_H + +#define _CHIBIOS_RT_CONF_ + +/*===========================================================================*/ +/** + * @name System timers settings + * @{ + */ +/*===========================================================================*/ + +/** + * @brief System time counter resolution. + * @note Allowed values are 16 or 32 bits. + */ +#define CH_CFG_ST_RESOLUTION 32 + +/** + * @brief System tick frequency. + * @details Frequency of the system timer that drives the system ticks. This + * setting also defines the system tick time unit. + */ +#define CH_CFG_ST_FREQUENCY 1000 + +/** + * @brief Time delta constant for the tick-less mode. + * @note If this value is zero then the system uses the classic + * periodic tick. This value represents the minimum number + * of ticks that is safe to specify in a timeout directive. + * The value one is not valid, timeouts are rounded up to + * this value. + */ +#define CH_CFG_ST_TIMEDELTA 0 + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel parameters and options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Round robin interval. + * @details This constant is the number of system ticks allowed for the + * threads before preemption occurs. Setting this value to zero + * disables the preemption for threads with equal priority and the + * round robin becomes cooperative. Note that higher priority + * threads can still preempt, the kernel is always preemptive. + * @note Disabling the round robin preemption makes the kernel more compact + * and generally faster. + * @note The round robin preemption is not supported in tickless mode and + * must be set to zero in that case. + */ +#define CH_CFG_TIME_QUANTUM 20 + +/** + * @brief Managed RAM size. + * @details Size of the RAM area to be managed by the OS. If set to zero + * then the whole available RAM is used. The core memory is made + * available to the heap allocator and/or can be used directly through + * the simplified core memory allocator. + * + * @note In order to let the OS manage the whole RAM the linker script must + * provide the @p __heap_base__ and @p __heap_end__ symbols. + * @note Requires @p CH_CFG_USE_MEMCORE. + */ +#define CH_CFG_MEMCORE_SIZE 0 + +/** + * @brief Idle thread automatic spawn suppression. + * @details When this option is activated the function @p chSysInit() + * does not spawn the idle thread. The application @p main() + * function becomes the idle thread and must implement an + * infinite loop. + */ +#define CH_CFG_NO_IDLE_THREAD FALSE + +/* Use __WFI in the idle thread for waiting. Does lower the power + * consumption. */ +#define CORTEX_ENABLE_WFI_IDLE TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Performance options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief OS optimization. + * @details If enabled then time efficient rather than space efficient code + * is used when two possible implementations exist. + * + * @note This is not related to the compiler optimization options. + * @note The default is @p TRUE. + */ +#define CH_CFG_OPTIMIZE_SPEED TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Subsystem options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Time Measurement APIs. + * @details If enabled then the time measurement APIs are included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_TM FALSE + +/** + * @brief Threads registry APIs. + * @details If enabled then the registry APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_REGISTRY TRUE + +/** + * @brief Threads synchronization APIs. + * @details If enabled then the @p chThdWait() function is included in + * the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_WAITEXIT TRUE + +/** + * @brief Semaphores APIs. + * @details If enabled then the Semaphores APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_SEMAPHORES TRUE + +/** + * @brief Semaphores queuing mode. + * @details If enabled then the threads are enqueued on semaphores by + * priority rather than in FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_SEMAPHORES_PRIORITY FALSE + +/** + * @brief Mutexes APIs. + * @details If enabled then the mutexes APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MUTEXES TRUE + +/** + * @brief Enables recursive behavior on mutexes. + * @note Recursive mutexes are heavier and have an increased + * memory footprint. + * + * @note The default is @p FALSE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_MUTEXES_RECURSIVE FALSE + +/** + * @brief Conditional Variables APIs. + * @details If enabled then the conditional variables APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MUTEXES. + */ +#define CH_CFG_USE_CONDVARS TRUE + +/** + * @brief Conditional Variables APIs with timeout. + * @details If enabled then the conditional variables APIs with timeout + * specification are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_CONDVARS. + */ +#define CH_CFG_USE_CONDVARS_TIMEOUT TRUE + +/** + * @brief Events Flags APIs. + * @details If enabled then the event flags APIs are included in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_EVENTS TRUE + +/** + * @brief Events Flags APIs with timeout. + * @details If enabled then the events APIs with timeout specification + * are included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_EVENTS. + */ +#define CH_CFG_USE_EVENTS_TIMEOUT TRUE + +/** + * @brief Synchronous Messages APIs. + * @details If enabled then the synchronous messages APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MESSAGES TRUE + +/** + * @brief Synchronous Messages queuing mode. + * @details If enabled then messages are served by priority rather than in + * FIFO order. + * + * @note The default is @p FALSE. Enable this if you have special + * requirements. + * @note Requires @p CH_CFG_USE_MESSAGES. + */ +#define CH_CFG_USE_MESSAGES_PRIORITY FALSE + +/** + * @brief Mailboxes APIs. + * @details If enabled then the asynchronous messages (mailboxes) APIs are + * included in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_SEMAPHORES. + */ +#define CH_CFG_USE_MAILBOXES TRUE + +/** + * @brief Core Memory Manager APIs. + * @details If enabled then the core memory manager APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMCORE TRUE + +/** + * @brief Heap Allocator APIs. + * @details If enabled then the memory heap allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_MEMCORE and either @p CH_CFG_USE_MUTEXES or + * @p CH_CFG_USE_SEMAPHORES. + * @note Mutexes are recommended. + */ +#define CH_CFG_USE_HEAP TRUE + +/** + * @brief Memory Pools Allocator APIs. + * @details If enabled then the memory pools allocator APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + */ +#define CH_CFG_USE_MEMPOOLS TRUE + +/** + * @brief Dynamic Threads APIs. + * @details If enabled then the dynamic threads creation APIs are included + * in the kernel. + * + * @note The default is @p TRUE. + * @note Requires @p CH_CFG_USE_WAITEXIT. + * @note Requires @p CH_CFG_USE_HEAP and/or @p CH_CFG_USE_MEMPOOLS. + */ +#define CH_CFG_USE_DYNAMIC TRUE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Debug options + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Debug option, kernel statistics. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_STATISTICS FALSE + +/** + * @brief Debug option, system state check. + * @details If enabled the correct call protocol for system APIs is checked + * at runtime. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_SYSTEM_STATE_CHECK TRUE + +/** + * @brief Debug option, parameters checks. + * @details If enabled then the checks on the API functions input + * parameters are activated. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_CHECKS TRUE + +/** + * @brief Debug option, consistency checks. + * @details If enabled then all the assertions in the kernel code are + * activated. This includes consistency checks inside the kernel, + * runtime anomalies and port-defined checks. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_ENABLE_ASSERTS TRUE + +/** + * @brief Debug option, trace buffer. + * @details If enabled then the trace buffer is activated. + * + * @note The default is @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_MASK CH_DBG_TRACE_MASK_DISABLED + +/** + * @brief Trace buffer entries. + * @note The trace buffer is only allocated if @p CH_DBG_TRACE_MASK is + * different from @p CH_DBG_TRACE_MASK_DISABLED. + */ +#define CH_DBG_TRACE_BUFFER_SIZE 128 + +/** + * @brief Debug option, stack checks. + * @details If enabled then a runtime stack check is performed. + * + * @note The default is @p FALSE. + * @note The stack check is performed in a architecture/port dependent way. + * It may not be implemented or some ports. + * @note The default failure mode is to halt the system with the global + * @p panic_msg variable set to @p NULL. + */ +#define CH_DBG_ENABLE_STACK_CHECK TRUE + +/** + * @brief Debug option, stacks initialization. + * @details If enabled then the threads working area is filled with a byte + * value when a thread is created. This can be useful for the + * runtime measurement of the used stack. + * + * @note The default is @p FALSE. + */ +#define CH_DBG_FILL_THREADS TRUE + +/** + * @brief Debug option, threads profiling. + * @details If enabled then a field is added to the @p thread_t structure that + * counts the system ticks occurred while executing the thread. + * + * @note The default is @p FALSE. + * @note This debug option is not currently compatible with the + * tickless mode. + */ +#define CH_DBG_THREADS_PROFILING FALSE + +/** @} */ + +/*===========================================================================*/ +/** + * @name Kernel hooks + * @{ + */ +/*===========================================================================*/ + +/** + * @brief Threads descriptor structure extension. + * @details User fields added to the end of the @p thread_t structure. + */ +#define CH_CFG_THREAD_EXTRA_FIELDS \ + /* Add threads custom fields here.*/ + +/** + * @brief Threads initialization hook. + * @details User initialization code added to the @p chThdInit() API. + * + * @note It is invoked from within @p chThdInit() and implicitly from all + * the threads creation APIs. + */ +#define CH_CFG_THREAD_INIT_HOOK(tp) { \ + /* Add threads initialization code here.*/ \ +} + +/** + * @brief Threads finalization hook. + * @details User finalization code added to the @p chThdExit() API. + */ +#define CH_CFG_THREAD_EXIT_HOOK(tp) { \ + /* Add threads finalization code here.*/ \ +} + +/** + * @brief Context switch hook. + * @details This hook is invoked just before switching between threads. + */ +#define CH_CFG_CONTEXT_SWITCH_HOOK(ntp, otp) { \ + /* Context switch code here.*/ \ +} + +/** + * @brief ISR enter hook. + */ +#define CH_CFG_IRQ_PROLOGUE_HOOK() { \ + /* IRQ prologue code here.*/ \ +} + +/** + * @brief ISR exit hook. + */ +#define CH_CFG_IRQ_EPILOGUE_HOOK() { \ + /* IRQ epilogue code here.*/ \ +} + +/** + * @brief Idle thread enter hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to activate a power saving mode. + */ +#define CH_CFG_IDLE_ENTER_HOOK() { \ + /* Idle-enter code here.*/ \ +} + +/** + * @brief Idle thread leave hook. + * @note This hook is invoked within a critical zone, no OS functions + * should be invoked from here. + * @note This macro can be used to deactivate a power saving mode. + */ +#define CH_CFG_IDLE_LEAVE_HOOK() { \ + /* Idle-leave code here.*/ \ +} + +/** + * @brief Idle Loop hook. + * @details This hook is continuously invoked by the idle thread loop. + */ +#define CH_CFG_IDLE_LOOP_HOOK() { \ + /* Idle loop code here.*/ \ +} + +/** + * @brief System tick event hook. + * @details This hook is invoked in the system tick handler immediately + * after processing the virtual timers queue. + */ +#define CH_CFG_SYSTEM_TICK_HOOK() { \ + /* System tick event code here.*/ \ +} + +/** + * @brief System halt hook. + * @details This hook is invoked in case to a system halting error before + * the system is halted. + */ +#define CH_CFG_SYSTEM_HALT_HOOK(reason) { \ + /* System halt code here.*/ \ +} + +/** + * @brief Trace hook. + * @details This hook is invoked each time a new record is written in the + * trace buffer. + */ +#define CH_CFG_TRACE_HOOK(tep) { \ + /* Trace code here.*/ \ +} + +/** @} */ + +/*===========================================================================*/ +/* Port-specific settings (override port settings defaulted in chcore.h). */ +/*===========================================================================*/ + +#endif /* CHCONF_H */ + +/** @} */ diff --git a/keyboard/kl27z_kbd/config.h b/keyboard/kl27z_kbd/config.h new file mode 100644 index 00000000..85aef524 --- /dev/null +++ b/keyboard/kl27z_kbd/config.h @@ -0,0 +1,80 @@ +/* +Copyright 2015 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#ifndef CONFIG_H +#define CONFIG_H + + +/* USB Device descriptor parameter */ +#define VENDOR_ID 0xFEED +#define PRODUCT_ID 0x1111 +#define DEVICE_VER 0x0001 +/* in python2: list(u"whatever".encode('utf-16-le')) */ +/* at most 32 characters or the ugly hack in usb_main.c borks */ +#define MANUFACTURER "TMK" +#define USBSTR_MANUFACTURER 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00' +#define PRODUCT "ChibiOS TMK test" +#define USBSTR_PRODUCT 'C', '\x00', 'h', '\x00', 'i', '\x00', 'b', '\x00', 'i', '\x00', 'O', '\x00', 'S', '\x00', ' ', '\x00', 'T', '\x00', 'M', '\x00', 'K', '\x00', ' ', '\x00', 't', '\x00', 'e', '\x00', 's', '\x00', 't', '\x00' +#define DESCRIPTION "TMK keyboard firmware over ChibiOS" + +/* key matrix size */ +#define MATRIX_ROWS 5 +#define MATRIX_COLS 14 + +/* define if matrix has ghost */ +//#define MATRIX_HAS_GHOST + +/* Set 0 if debouncing isn't needed */ +#define DEBOUNCE 5 + +/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */ +#define LOCKING_SUPPORT_ENABLE +/* Locking resynchronize hack */ +#define LOCKING_RESYNC_ENABLE + +/* key combination for command */ +#define IS_COMMAND() ( \ + keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \ +) + + + +/* + * Feature disable options + * These options are also useful to firmware size reduction. + */ + +/* disable debug print */ +//#define NO_DEBUG + +/* disable print */ +//#define NO_PRINT + +/* disable action features */ +//#define NO_ACTION_LAYER +//#define NO_ACTION_TAPPING +//#define NO_ACTION_ONESHOT +//#define NO_ACTION_MACRO +//#define NO_ACTION_FUNCTION + +// TODO: add this to ChibiOS-Contrib/os/common/ext/CMSIS/KINETIS/kl27zxxx.h +#ifndef USBx_CTL_RESUME +#define USBx_CTL_RESUME ((uint8_t)0x04) /*!< Executes resume signaling */ +#endif + + +#endif diff --git a/keyboard/kl27z_kbd/halconf.h b/keyboard/kl27z_kbd/halconf.h new file mode 100644 index 00000000..b1d2cd55 --- /dev/null +++ b/keyboard/kl27z_kbd/halconf.h @@ -0,0 +1,187 @@ +/* + ChibiOS - Copyright (C) 2006..2015 Giovanni Di Sirio + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +/** + * @file templates/halconf.h + * @brief HAL configuration header. + * @details HAL configuration file, this file allows to enable or disable the + * various device drivers from your application. You may also use + * this file in order to override the device drivers default settings. + * + * @addtogroup HAL_CONF + * @{ + */ + +#ifndef _HALCONF_H_ +#define _HALCONF_H_ + +#include "mcuconf.h" + +/** + * @brief Enables the PAL subsystem. + */ +#if !defined(HAL_USE_PAL) || defined(__DOXYGEN__) +#define HAL_USE_PAL TRUE +#endif + +/** + * @brief Enables the ADC subsystem. + */ +#if !defined(HAL_USE_ADC) || defined(__DOXYGEN__) +#define HAL_USE_ADC FALSE +#endif + +/** + * @brief Enables the CAN subsystem. + */ +#if !defined(HAL_USE_CAN) || defined(__DOXYGEN__) +#define HAL_USE_CAN FALSE +#endif + +/** + * @brief Enables the DAC subsystem. + */ +#if !defined(HAL_USE_DAC) || defined(__DOXYGEN__) +#define HAL_USE_DAC FALSE +#endif + +/** + * @brief Enables the EXT subsystem. + */ +#if !defined(HAL_USE_EXT) || defined(__DOXYGEN__) +#define HAL_USE_EXT FALSE +#endif + +/** + * @brief Enables the GPT subsystem. + */ +#if !defined(HAL_USE_GPT) || defined(__DOXYGEN__) +#define HAL_USE_GPT FALSE +#endif + +/** + * @brief Enables the I2C subsystem. + */ +#if !defined(HAL_USE_I2C) || defined(__DOXYGEN__) +#define HAL_USE_I2C FALSE +#endif + +/** + * @brief Enables the I2S subsystem. + */ +#if !defined(HAL_USE_I2S) || defined(__DOXYGEN__) +#define HAL_USE_I2S FALSE +#endif + +/** + * @brief Enables the ICU subsystem. + */ +#if !defined(HAL_USE_ICU) || defined(__DOXYGEN__) +#define HAL_USE_ICU FALSE +#endif + +/** + * @brief Enables the MAC subsystem. + */ +#if !defined(HAL_USE_MAC) || defined(__DOXYGEN__) +#define HAL_USE_MAC FALSE +#endif + +/** + * @brief Enables the MMC_SPI subsystem. + */ +#if !defined(HAL_USE_MMC_SPI) || defined(__DOXYGEN__) +#define HAL_USE_MMC_SPI FALSE +#endif + +/** + * @brief Enables the PWM subsystem. + */ +#if !defined(HAL_USE_PWM) || defined(__DOXYGEN__) +#define HAL_USE_PWM FALSE +#endif + +/** + * @brief Enables the RTC subsystem. + */ +#if !defined(HAL_USE_RTC) || defined(__DOXYGEN__) +#define HAL_USE_RTC FALSE +#endif + +/** + * @brief Enables the SDC subsystem. + */ +#if !defined(HAL_USE_SDC) || defined(__DOXYGEN__) +#define HAL_USE_SDC FALSE +#endif + +/** + * @brief Enables the SERIAL subsystem. + */ +#if !defined(HAL_USE_SERIAL) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL FALSE +#endif + +/** + * @brief Enables the SERIAL over USB subsystem. + */ +#if !defined(HAL_USE_SERIAL_USB) || defined(__DOXYGEN__) +#define HAL_USE_SERIAL_USB FALSE +#endif + +/** + * @brief Enables the SPI subsystem. + */ +#if !defined(HAL_USE_SPI) || defined(__DOXYGEN__) +#define HAL_USE_SPI FALSE +#endif + +/** + * @brief Enables the UART subsystem. + */ +#if !defined(HAL_USE_UART) || defined(__DOXYGEN__) +#define HAL_USE_UART FALSE +#endif + +/** + * @brief Enables the USB subsystem. + */ +#if !defined(HAL_USE_USB) || defined(__DOXYGEN__) +#define HAL_USE_USB TRUE +#endif + +/** + * @brief Enables the WDG subsystem. + */ +#if !defined(HAL_USE_WDG) || defined(__DOXYGEN__) +#define HAL_USE_WDG FALSE +#endif + +/*===========================================================================*/ +/* USB driver related settings. */ +/*===========================================================================*/ + +/** + * @brief Enables synchronous APIs. + * @note Disabling this option saves both code and data space. + */ +#if !defined(USB_USE_WAIT) || defined(__DOXYGEN__) +#define USB_USE_WAIT TRUE +#endif + +#endif /* _HALCONF_H_ */ + +/** @} */ diff --git a/keyboard/kl27z_kbd/kl27z_kbd.c b/keyboard/kl27z_kbd/kl27z_kbd.c new file mode 100644 index 00000000..ddb4bde5 --- /dev/null +++ b/keyboard/kl27z_kbd/kl27z_kbd.c @@ -0,0 +1,234 @@ +/* +Copyright 2012 Jun Wako + +This program is free software: you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation, either version 2 of the License, or +(at your option) any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program. If not, see . +*/ + +#include "ch.h" +#include "hal.h" + +/* + * scan matrix + */ +#include "print.h" +#include "debug.h" +#include "util.h" +#include "wait.h" +#include "matrix.h" +#include "led.h" +#include "keymap.h" +#include "timer.h" + + +/* Matrix + * COL: input with pullup to sense + * PTD6 PTD5 PTD4 PTD3 PTA19 PTA18 PTA4 PTA2 PTA1 PTE25 PTE24 PTE30 PTE29 PTE21 + * + * ROW: output low to strobe + * PTB3 PTB16 PTB17 PTC0 PTC1 + * + * State(1:on, 0:off) + */ +static matrix_row_t matrix[MATRIX_ROWS]; +static matrix_row_t matrix_debouncing[MATRIX_ROWS]; +static bool debouncing = false; +static uint16_t debouncing_time = 0; + + +inline +uint8_t matrix_rows(void) +{ + return MATRIX_ROWS; +} + +inline +uint8_t matrix_cols(void) +{ + return MATRIX_COLS; +} + +void matrix_init(void) +{ + debug_matrix = true; + memset(matrix, 0, MATRIX_ROWS); + memset(matrix_debouncing, 0, MATRIX_ROWS); + + // COL: internal pull-up + palSetPadMode(GPIOD, 6, PAL_MODE_INPUT_PULLUP); + palSetPadMode(GPIOD, 5, PAL_MODE_INPUT_PULLUP); + palSetPadMode(GPIOD, 4, PAL_MODE_INPUT_PULLUP); + palSetPadMode(GPIOD, 3, PAL_MODE_INPUT_PULLUP); + + palSetPadMode(GPIOA, 19, PAL_MODE_INPUT_PULLUP); + palSetPadMode(GPIOA, 18, PAL_MODE_INPUT_PULLUP); + palSetPadMode(GPIOA, 4, PAL_MODE_INPUT_PULLUP); + palSetPadMode(GPIOA, 2, PAL_MODE_INPUT_PULLUP); + palSetPadMode(GPIOA, 1, PAL_MODE_INPUT_PULLUP); + + palSetPadMode(GPIOE, 25, PAL_MODE_INPUT_PULLUP); + palSetPadMode(GPIOE, 24, PAL_MODE_INPUT_PULLUP); + palSetPadMode(GPIOE, 30, PAL_MODE_INPUT_PULLUP); + palSetPadMode(GPIOE, 29, PAL_MODE_INPUT_PULLUP); + palSetPadMode(GPIOE, 21, PAL_MODE_INPUT_PULLUP); + + // ROW: Output high + palSetPadMode(GPIOB, 3, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 16, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOB, 17, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 0, PAL_MODE_OUTPUT_PUSHPULL); + palSetPadMode(GPIOC, 1, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(GPIOB, 3); + palSetPad(GPIOB, 16); + palSetPad(GPIOB, 17); + palSetPad(GPIOC, 0); + palSetPad(GPIOC, 1); + + + // LED blink + palSetPadMode(GPIOD, 7, PAL_MODE_OUTPUT_PUSHPULL); + palSetPad(GPIOD, 7); + chThdSleepMilliseconds(200); + palClearPad(GPIOD, 7); + chThdSleepMilliseconds(200); + palSetPad(GPIOD, 7); + chThdSleepMilliseconds(200); + palClearPad(GPIOD, 7); +} + +uint8_t matrix_scan(void) +{ + for (int row = 0; row < MATRIX_ROWS; row++) { + matrix_row_t data = 0; + + // strobe row + switch (row) { + case 0: palClearPad(GPIOB, 3); break; + case 1: palClearPad(GPIOB, 16); break; + case 2: palClearPad(GPIOB, 17); break; + case 3: palClearPad(GPIOC, 0); break; + case 4: palClearPad(GPIOC, 1); break; + } + + //wait_us(1); + //chThdSleepMicroseconds(1); // TODO: sleep around 1ms for some reason + //chThdSleepMilliseconds(1); // seems to work correctly + + data = (!palReadPad(GPIOD, 6) << 0UL) | + (!palReadPad(GPIOD, 5) << 1UL) | + (!palReadPad(GPIOD, 4) << 2UL) | + (!palReadPad(GPIOD, 3) << 3UL) | + (!palReadPad(GPIOA, 19) << 4UL) | + (!palReadPad(GPIOA, 18) << 5UL) | + (!palReadPad(GPIOA, 4) << 6UL) | + (!palReadPad(GPIOA, 2) << 7UL) | + (!palReadPad(GPIOA, 1) << 8UL) | + (!palReadPad(GPIOE, 25) << 9UL) | + (!palReadPad(GPIOE, 24) << 10UL) | + (!palReadPad(GPIOE, 30) << 11UL) | + (!palReadPad(GPIOE, 29) << 12UL) | + (!palReadPad(GPIOE, 21) << 13UL); + + // unstrobe row + switch (row) { + case 0: palSetPad(GPIOB, 3); break; + case 1: palSetPad(GPIOB, 16); break; + case 2: palSetPad(GPIOB, 17); break; + case 3: palSetPad(GPIOC, 0); break; + case 4: palSetPad(GPIOC, 1); break; + } + + if (matrix_debouncing[row] != data) { + matrix_debouncing[row] = data; + debouncing = true; + debouncing_time = timer_read(); + } + } + + if (debouncing && timer_elapsed(debouncing_time) > DEBOUNCE) { + for (int row = 0; row < MATRIX_ROWS; row++) { + matrix[row] = matrix_debouncing[row]; + } + debouncing = false; + } + return 1; +} + +inline +bool matrix_is_on(uint8_t row, uint8_t col) +{ + return (matrix[row] & (1< + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. +*/ + +#ifndef _MCUCONF_H_ +#define _MCUCONF_H_ + +#define KL2x_MCUCONF + +/* + * HAL driver system settings. + */ +#if 1 +/* High-frequency internal RC, 48MHz, possible USB clock recovery */ +#define KINETIS_MCGLITE_MODE KINETIS_MCGLITE_MODE_HIRC +#define KINETIS_SYSCLK_FREQUENCY 48000000UL +#define KINETIS_CLKDIV1_OUTDIV1 1 +#endif + +#if 0 +/* Low-frequency internal RC, 8 MHz mode */ +#define KINETIS_MCGLITE_MODE KINETIS_MCGLITE_MODE_LIRC8M +#define KINETIS_SYSCLK_FREQUENCY 8000000UL +#define KINETIS_CLKDIV1_OUTDIV1 1 +#endif + +/* + * SERIAL driver system settings. + */ +#define KINETIS_SERIAL_USE_UART0 TRUE + +/* + * USB driver settings + */ +#define KINETIS_USB_USE_USB0 TRUE +/* need to redefine this, since the default is for K20x */ +#define KINETIS_USB_USB0_IRQ_PRIORITY 2 + +/* + * Kinetis FOPT configuration byte + */ +/* for KL27: */ +#define KINETIS_NV_FOPT_BYTE 0x39 +#define KINETIS_NV_FSEC_BYTE 0x7E +/* NV_FOPT: bit7-6/BOOTSRC_SEL=0b00 (11=from ROM; 00=from FLASH) + bit5/FAST_INIT=1, bit4/LPBOOT1=1, + bit3/RESET_PIN_CFG=1, bit2/NMI_DIS=1, + bit1/BOOTPIN_OPT=0, bit0/LPBOOT0=1 */ +/* BOOTPIN_OPT: 1=boot depends on BOOTSRC_SEL + 0=boot samples BOOTCFG0=NMI pin */ +/* Boot sequence, page 88 of manual: + * - If the NMI/BOOTCFG0 input is high or the NMI function is disabled in FTFA_FOPT, the CPU begins execution at the PC location. + * - If the NMI/BOOTCFG0 input is low, the NMI function is enabled in FTFA_FOPT, and FTFA_FOPT[BOOTPIN_OPT] = 1, this results in an NMI interrupt. The processor executes an Exception Entry and reads the NMI interrupt handler address from vector-table offset 8. The CPU begins execution at the NMI interrupt handler. + * - When FTFA_FOPT[BOOTPIN_OPT] = 0, it forces boot from ROM if NMI/BOOTCFG0 pin set to 0. + * + * Observed behaviour: + * - when BOOTPIN_OPT=0, BOOTSRC_SEL still matters: + * - if 0b11 (from ROM), it still boots from ROM, even if BOOTCFG0 pin + * is high/floating, but leaves ROM and runs user app after + * 5 seconds delay. + * - if 0b00 (from FLASH), reset/powerup jumps to user app unless + * BOOTCFG0 pin is asserted. + * - in any case, reset when in bootloader induces the 5 second delay + * before starting the user app. + * + */ + +#endif /* _MCUCONF_H_ */