From: tmk <hasu@tmk-kbd.com>
Date: Fri, 2 Dec 2016 01:10:49 +0000 (+0900)
Subject: Add pinout on README
X-Git-Url: https://git.friedersdorff.com/?a=commitdiff_plain;h=9ea5931785f61224132e28cc9c15dc954568a299;p=max%2Ftmk_keyboard.git

Add pinout on README
---

diff --git a/keyboard/kl27z_onekey/README.md b/keyboard/kl27z_onekey/README.md
index 11a32169..bca630eb 100644
--- a/keyboard/kl27z_onekey/README.md
+++ b/keyboard/kl27z_onekey/README.md
@@ -7,8 +7,56 @@ KL27Z is configured to use internal 48MHz RC oscillator.
 The board has push button on PTA4 and LED on PTD7. The button works as 'a' key and the LED as an indicator for capslock.
 
 
+ELF board
+---------
+### prototypte pinout
+- pcb layout  https://deskthority.net/resources/image/33293
+- schematic  https://deskthority.net/resources/image/33252
+
+
+    39 .....  44 \ conn / 1 ..... 6
+    38           |______|    LED  7
+     :  Rst                       :
+     :                            :
+    32  Bl                        13
+    31 .........24 23............ 14
+
+    1   PTD6        12  PTC3         23  GND        34  PTE20
+    2   PTD5        13  PTC2         24  PTA18      35  PTA20   Reset
+    3   PTD4        14  PTC1         25  3.3V       36  PTA3    SWD_DIO
+    4   PTD3        15  PTC0         26  NMI        37  PTA0    SWD_CLK
+    5   PTD2        16  PTB17        27  PTA2       38  3.3V
+    6   PTD1        17  PTB16        28  PTA1       39  GND
+    7   PTD0        18  PTB3         29  PTE25      40  VBUS    VREGIN
+    8   PTC7        19  PTB2         30  PTE24      41  USB D-
+    9   PTC6        20  PTB1         31  PTE30      42  USB D+
+    10  PTC5        21  PTB0         32  PTE29      43  GND
+    11  PTC4        22  PTA19        33  PTE21      44  USB Shield
+
+### ROM bootloader pins
+See Reference Manual Chapter 13.
+
+    PTA2 LPUART0_TX
+    PTA1 LPUART0_RX *
+    PTB0 I2C0_SCL
+    PTB1 I2C0_SDA
+    PTC4 SPI0_SS_b *
+    PTC7 SPI0_MISO
+    PTC6 SPI0_MOSI
+    PTC5 SPI0_SCK *
+
+Due to errata e9457, need to pull-up `SPI0_SS_b`(or `SPI0_SCK`) to prevent false detection of SPI.
+The errata doesn't refer UART though, `LPUART0_RX` also requires pull-up or down resisitor from experience. 
+Without resistor it easily false-detects activity on UART interface with finger touch on the pin.
+
+
+
+
 Resources
 ---------
+### Deskthority thread
+https://deskthority.net/workshop-f7/can-we-design-the-teensy-alternative-for-keyboards-t13662-510.html
+
 ### Kinetis KL2x
 http://www.nxp.com/products/microcontrollers-and-processors/arm-processors/kinetis-cortex-m-mcus/l-series-ultra-low-power-m0-plus/kinetis-kl2x-48-mhz-usb-ultra-low-power-microcontrollers-based-on-arm-cortex-m0-plus:KL2x