From: tmk Date: Sat, 11 Jul 2015 08:01:07 +0000 (+0900) Subject: m0110_usb: Change keymap and Makefile X-Git-Url: https://git.friedersdorff.com/?a=commitdiff_plain;h=ce8b1e5f1347bb04ee26ef21c24aa52e8fdf23d7;p=max%2Ftmk_keyboard.git m0110_usb: Change keymap and Makefile --- diff --git a/converter/m0110_usb/Makefile.pjrc b/converter/m0110_usb/Makefile.tmk_rev1 similarity index 58% rename from converter/m0110_usb/Makefile.pjrc rename to converter/m0110_usb/Makefile.tmk_rev1 index e8256421..f36fcc4b 100644 --- a/converter/m0110_usb/Makefile.pjrc +++ b/converter/m0110_usb/Makefile.tmk_rev1 @@ -1,5 +1,5 @@ # Target file name (without extension). -TARGET = m0110_pjrc +TARGET = m0110_lufa # Directory common source filess exist TMK_DIR = ../../tmk_core @@ -10,13 +10,14 @@ TARGET_DIR = . # keyboard dependent files SRC = matrix.c \ led.c \ + keymap_common.c \ m0110.c # To use own keymap file run make like: make keymap=hasu -ifdef keymap - SRC += keymap_$(keymap).c +ifdef KEYMAP + SRC += keymap_$(KEYMAP).c else - SRC += keymap.c + SRC += keymap_default.c endif CONFIG_H = config.h @@ -24,10 +25,8 @@ CONFIG_H = config.h # MCU name, you MUST set this to match the board you are using # type "make clean" after changing this, so all files will be rebuilt -#MCU = at90usb162 # Teensy 1.0 -MCU = atmega32u4 # Teensy 2.0 -#MCU = at90usb646 # Teensy++ 1.0 -#MCU = at90usb1286 # Teensy++ 2.0 +#MCU = atmega32u2 # TMK converter rev2 +MCU = atmega32u4 # TMK converter rev1 # Processor frequency. @@ -38,6 +37,29 @@ MCU = atmega32u4 # Teensy 2.0 F_CPU = 16000000 +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + # Boot Section Size in bytes # Teensy halfKay 512 # Atmel DFU loader 4096 @@ -55,6 +77,7 @@ CONSOLE_ENABLE = yes # Console for debug(+400) COMMAND_ENABLE = yes # Commands for debug and configuration #SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend #NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor @@ -67,7 +90,7 @@ VPATH += $(TARGET_DIR) VPATH += $(TMK_DIR) -include $(TMK_DIR)/protocol/pjrc.mk +include $(TMK_DIR)/protocol/lufa.mk include $(TMK_DIR)/protocol.mk include $(TMK_DIR)/common.mk include $(TMK_DIR)/rules.mk diff --git a/converter/m0110_usb/Makefile.tmk_rev2 b/converter/m0110_usb/Makefile.tmk_rev2 new file mode 100644 index 00000000..e8364563 --- /dev/null +++ b/converter/m0110_usb/Makefile.tmk_rev2 @@ -0,0 +1,96 @@ +# Target file name (without extension). +TARGET = m0110_lufa + +# Directory common source filess exist +TMK_DIR = ../../tmk_core + +# Directory keyboard dependent files exist +TARGET_DIR = . + +# keyboard dependent files +SRC = matrix.c \ + led.c \ + keymap_common.c \ + m0110.c + +# To use own keymap file run make like: make keymap=hasu +ifdef KEYMAP + SRC += keymap_$(KEYMAP).c +else + SRC += keymap_default.c +endif + +CONFIG_H = config.h + + +# MCU name, you MUST set this to match the board you are using +# type "make clean" after changing this, so all files will be rebuilt +MCU = atmega32u2 # TMK converter rev2 +#MCU = atmega32u4 # TMK converter rev1 + + +# Processor frequency. +# Normally the first thing your program should do is set the clock prescaler, +# so your program will run at the correct speed. You should also set this +# variable to same clock speed. The _delay_ms() macro uses this, and many +# examples use this variable to calculate timings. Do not add a "UL" here. +F_CPU = 16000000 + + +# +# LUFA specific +# +# Target architecture (see library "Board Types" documentation). +ARCH = AVR8 + +# Input clock frequency. +# This will define a symbol, F_USB, in all source code files equal to the +# input clock frequency (before any prescaling is performed) in Hz. This value may +# differ from F_CPU if prescaling is used on the latter, and is required as the +# raw input clock is fed directly to the PLL sections of the AVR for high speed +# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL' +# at the end, this will be done automatically to create a 32-bit value in your +# source code. +# +# If no clock division is performed on the input clock inside the AVR (via the +# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU. +F_USB = $(F_CPU) + +# Interrupt driven control endpoint task +OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT + + +# Boot Section Size in bytes +# Teensy halfKay 512 +# Atmel DFU loader 4096 +# LUFA bootloader 4096 +OPT_DEFS += -DBOOTLOADER_SIZE=4096 + + +# Build Options +# *Comment out* to disable the options. +# +#BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000) +MOUSEKEY_ENABLE = yes # Mouse keys(+4700) +EXTRAKEY_ENABLE = yes # Audio control and System control(+450) +CONSOLE_ENABLE = yes # Console for debug(+400) +COMMAND_ENABLE = yes # Commands for debug and configuration +#SLEEP_LED_ENABLE = yes # Breathing sleep LED during USB suspend +#NKRO_ENABLE = yes # USB Nkey Rollover - not yet supported in LUFA +#KEYMAP_SECTION_ENABLE = yes # fixed address keymap for keymap editor + + + +#---------------- Programming Options -------------------------- +PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex + + +# Search Path +VPATH += $(TARGET_DIR) +VPATH += $(TMK_DIR) + + +include $(TMK_DIR)/protocol/lufa.mk +include $(TMK_DIR)/protocol.mk +include $(TMK_DIR)/common.mk +include $(TMK_DIR)/rules.mk diff --git a/converter/m0110_usb/README.md b/converter/m0110_usb/README.md index c1ecb53b..bfd3261d 100644 --- a/converter/m0110_usb/README.md +++ b/converter/m0110_usb/README.md @@ -59,19 +59,16 @@ To compile firmware you need AVR GCC. You can edit *Makefile* and *config.h* to $ git clone git://github.com/tmk/tmk_keyboard.git (or download source) $ cd m0110_usb - $ make -f Makefile clean - $ make -f Makefile [KEYMAP={default|plain|intl|spacefn|hasu}] + $ make -f Makefile.rev2 clean + $ make -f Makefile.rev2 [KEYMAP={default|intl|spacefn|hasu}] -Use `Makefile.teensy` instead for Teensy. +Use `Maefile.tmk_rev1` for TMK converter Rev.1, `Makefile.teensy` for Teensy instead. Keymap ------ -To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. You can build it like this. - - $ make -f Makefile clean - $ make -f Makefile KEYMAP=name +To create your own keymap copy existent keymap file to `keymap_name.c` and edit it. diff --git a/converter/m0110_usb/keymap_common.h b/converter/m0110_usb/keymap_common.h index 8bde7473..925556d9 100644 --- a/converter/m0110_usb/keymap_common.h +++ b/converter/m0110_usb/keymap_common.h @@ -1,5 +1,5 @@ /* -Copyright 2011,2012,2014 Jun Wako +Copyright 2011,2012,2014,2015 Jun Wako This program is free software: you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -24,64 +24,49 @@ extern const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS]; extern const uint16_t fn_actions[]; -/* - * The keymap works with both M0110 and M0110A keyboards. As you can see, the M0110A is a superset - * of the M0110 keyboard, with only one exception: 'Enter' in M0110 does not exist - * on the M0110A, but since it generates a unique scan code which is not used for some other key in - * the M0110A, they are totally interchangeable. In fact, the M0110A is functionally (almost) - * identical to the combination of the M0110 along with the M0120 keypad. The only difference - * (which is causing some problems as you will read below) is that the M0110+M0120 don't have - * dedicated arrow keys, while the M0110A does. However, the M0120 did have arrow keys, which - * doubled as the [comma], [/], [*] and [+] keys, when used with the [Shift] key. The M0110A has - * substituted the [comma] key with the [=] key, however its scancode is the same. +/* Common layout for M0110 and M0110A + * This keymap works with both keyboards. As you can see, the M0110A is + * a superset of M0110 keyboard, only one exception is 'Enter'(34) of M0110 + * does not exist on the M0110A. * - * Physical layout: - * M0110A * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Clr| =| /| *| + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *| * |---------------------------------------------------------| |---------------| * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| * |-----------------------------------------------------' | |---------------| * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| * |---------------------------------------------------------| |---------------| * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | - * |---------------------------------------------------------' |-----------|Ent| - * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| | + * |---------------------------------------------------------| |-----------|Ent| + * |Opt |Mac | Space |Ent| \|Lft|Rgt|Dn | | 0| .| | * `---------------------------------------------------------' `---------------' * - * M0110 M0120 + * M0110A scan codes * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| -| +| *| + * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62| * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /| - * |---------------------------------------------------------| |---------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,| + * | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| | | 59| 5B| 5C| 4E| + * |-----------------------------------------------------' | |---------------| + * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66| * |---------------------------------------------------------| |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | - * `---------------------------------------------------------' |-----------|Ent| - * |Opt|Mac | Space |Ent |Opt| | 0| .| | - * `-----------------------------------------------' `---------------' - * With Shift keys on M0120 work as curosor.(-:Left *:Right /:Up ,:Down) + * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| 4D| | 53| 54| 55| | + * `---------------------------------------------------------' |-----------| 4C| + * | 3A| 37| 31 | 2A| 46| 42| 48| | 52| 41| | + * `---------------------------------------------------------' `---------------' * - * NOTE: \ is located differently. - * NOTE: Enter on M0110 is different from Enter on keypad(M0120 and M0110A). - * NOTE: Left Shift and right Shift are logically same key. - * NOTE: Left Option and right Option are logically same key. - */ - -/* Keymap definition Macro + * M0110 + M0120 scan codes * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *| + * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62| * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| - * |-----------------------------------------------------' | |---------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| + * | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E| * |---------------------------------------------------------| |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | - * |---------------------------------------------------------| |-----------|Ent| - * |Opt |Mac | Space |Ent| \|Lft|Rgt|Dn | | 0| .| | - * `---------------------------------------------------------' `---------------' - * NOTE: Ent between Space and \ means Enter on M0110. + * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | 56| 57| 58| 66| + * |---------------------------------------------------------| |---------------| + * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 38| | 53| 54| 55| | + * `---------------------------------------------------------' |-----------| 4C| + * | 3A| 37| 31 | 34| 3A| | 52| 41| | + * `------------------------------------------------' `---------------' + * Two right and left keys of 38 and 3A are identical, you cannot discriminate those two. */ #define KEYMAP( \ K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \ @@ -106,25 +91,30 @@ extern const uint16_t fn_actions[]; { KC_##K68, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K6D, KC_NO, KC_NO }, \ } -/* International keyboard - * ,---------------------------------------------------------. - * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| - * |---------------------------------------------------------| - * | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| - * |------------------------------------------------------, | - * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | - * |---------------------------------------------------------| - * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A| 38| - * `---------------------------------------------------------' - * | 3A| 37| 34 | 31| 3A| - * `------------------------------------------------' +/* International keyboard layout for M0110 + M0120 + * https://en.wikipedia.org/wiki/File:Apple_Macintosh_Plus_Keyboard.jpg + * Probably International keyboard layout of M0110A doesn't exist. + * + * M0110 + M0120 scan codes + * ,---------------------------------------------------------. ,---------------. + * | 32| 12| 13| 14| 15| 17| 16| 1A| 1C| 19| 1D| 1B| 18| 33| | 47| 68| 6D| 62| + * |---------------------------------------------------------| |---------------| + * | 30| 0C| 0D| 0E| 0F| 10| 11| 20| 22| 1F| 23| 21| 1E| 2A| | 59| 5B| 5C| 4E| + * |------------------------------------------------------, | |---------------| + * | 39| 00| 01| 02| 03| 05| 04| 26| 28| 25| 29| 27| 24| | | 56| 57| 58| 66| + * |---------------------------------------------------------| |---------------| + * | 38| 06| 07| 08| 09| 0B| 2D| 2E| 2B| 2F| 2C| 0A| 38| | 53| 54| 55| | + * `---------------------------------------------------------' |-----------| 4C| + * | 3A| 37| 34 | 31| 3A| | 52| 41| | + * `------------------------------------------------' `---------------' + * Two right and left keys of 38 and 3A are identical, you cannot discriminate those two. */ #define KEYMAP_INTL( \ K32,K12,K13,K14,K15,K17,K16,K1A,K1C,K19,K1D,K1B,K18,K33, K47,K68,K6D,K62, \ K30,K0C,K0D,K0E,K0F,K11,K10,K20,K22,K1F,K23,K21,K1E,K2A, K59,K5B,K5C,K4E, \ K39,K00,K01,K02,K03,K05,K04,K26,K28,K25,K29,K27,K24, K56,K57,K58,K66, \ - K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,K0A, K4D, K53,K54,K55,K4C, \ - K3A,K37, K34, K31, K46,K42,K48, K52, K41 \ + K38,K06,K07,K08,K09,K0B,K2D,K2E,K2B,K2F,K2C,K0A, K53,K54,K55,K4C, \ + K3A,K37, K34, K31, K52, K41 \ ) { \ { KC_##K00, KC_##K01, KC_##K02, KC_##K03, KC_##K04, KC_##K05, KC_##K06, KC_##K07 }, \ { KC_##K08, KC_##K09, KC_##K0A, KC_##K0B, KC_##K0C, KC_##K0D, KC_##K0E, KC_##K0F }, \ @@ -134,8 +124,8 @@ extern const uint16_t fn_actions[]; { KC_##K28, KC_##K29, KC_##K2A, KC_##K2B, KC_##K2C, KC_##K2D, KC_##K2E, KC_##K2F }, \ { KC_##K30, KC_##K31, KC_##K32, KC_##K33, KC_##K34, KC_NO, KC_NO, KC_##K37 }, \ { KC_##K38, KC_##K39, KC_##K3A, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO }, \ - { KC_NO, KC_##K41, KC_##K42, KC_NO, KC_NO, KC_NO, KC_##K46, KC_##K47 }, \ - { KC_##K48, KC_NO, KC_NO, KC_NO, KC_##K4C, KC_##K4D, KC_##K4E, KC_NO }, \ + { KC_NO, KC_##K41, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, KC_##K47 }, \ + { KC_NO, KC_NO, KC_NO, KC_NO, KC_##K4C, KC_NO, KC_##K4E, KC_NO }, \ { KC_NO, KC_NO, KC_##K52, KC_##K53, KC_##K54, KC_##K55, KC_##K56, KC_##K57 }, \ { KC_##K58, KC_##K59, KC_NO, KC_##K5B, KC_##K5C, KC_NO, KC_NO, KC_NO }, \ { KC_NO, KC_NO, KC_##K62, KC_NO, KC_NO, KC_NO, KC_##K66, KC_NO }, \ diff --git a/converter/m0110_usb/keymap_default.c b/converter/m0110_usb/keymap_default.c index b0b8ee22..ff7478d1 100644 --- a/converter/m0110_usb/keymap_default.c +++ b/converter/m0110_usb/keymap_default.c @@ -20,15 +20,19 @@ along with this program. If not, see . +#ifdef KEYMAP_SECTION_ENABLE +const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { +#else const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { +#endif /* Default: * M0110 M0120 * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| -| +| *| + * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| =| /| *| * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /| + * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| -| * |---------------------------------------------------------| |---------------| - * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,| + * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| * |---------------------------------------------------------| |---------------| * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | * `---------------------------------------------------------' |-----------|Ent| @@ -52,27 +56,40 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, - LALT,LGUI, SPC, FN0, BSLS,LEFT,RGHT,DOWN, P0, PDOT + LALT,LGUI, SPC, FN0, FN13,LEFT,RGHT,DOWN, P0, PDOT ), - /* Cursor Layer + /* Cursor Layer: + * M0110 M0120 * ,---------------------------------------------------------. ,---------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| -| +| *| + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| * |---------------------------------------------------------| |---------------| - * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up | |INS| | 7| 8| 9| /| + * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |INS| | | 7| 8| 9| -| * |---------------------------------------------------------| |---------------| - * |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| ,| + * |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +| * |---------------------------------------------------------| |---------------| * |Shift |End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| | * `---------------------------------------------------------' |-----------|Ent| * |Opt|Mac | Space |Fn |Opt| | 0| .| | * `-----------------------------------------------' `---------------' + * M0110A + * ,---------------------------------------------------------. ,---------------. + * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| + * |---------------------------------------------------------| |---------------| + * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |INS| | | 7| 8| 9| -| + * |-----------------------------------------------------' | |---------------| + * |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Return| | 4| 5| 6| +| + * |---------------------------------------------------------| |---------------| + * |Shift |End| |PgD| | | | |End|PgD|Dow|Shft|PgU| | 1| 2| 3| | + * |---------------------------------------------------------| |-----------|Ent| + * |Opt |Mac | Space | \|Hom|End|PgD| | 0| .| | + * `---------------------------------------------------------' `---------------' */ [1] = KEYMAP( ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, - CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, P7, P8, P9, PMNS, + CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS, LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, ENT, P4, P5, P6, PPLS, LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, - LALT,LGUI, SPC, FN0, INS, HOME,END, PGDN, P0, PDOT + LALT,LGUI, SPC, FN0, FN13,HOME,END, PGDN, P0, PDOT ), }; @@ -80,6 +97,41 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { /* * Fn action definition */ +#ifdef KEYMAP_SECTION_ENABLE +const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = { +#else const uint16_t fn_actions[] PROGMEM = { +#endif [0] = ACTION_LAYER_MOMENTARY(1), + [1] = ACTION_LAYER_MOMENTARY(2), + [2] = ACTION_LAYER_MOMENTARY(3), + [3] = ACTION_LAYER_MOMENTARY(4), + [4] = ACTION_LAYER_MOMENTARY(5), + [5] = ACTION_LAYER_MOMENTARY(6), + [6] = ACTION_LAYER_MOMENTARY(7), + [7] = ACTION_LAYER_TOGGLE(1), + [8] = ACTION_LAYER_TOGGLE(2), + [9] = ACTION_LAYER_TOGGLE(3), + [10] = ACTION_LAYER_TAP_TOGGLE(1), + [11] = ACTION_LAYER_TAP_TOGGLE(2), + [12] = ACTION_LAYER_TAP_TOGGLE(3), + [13] = ACTION_LAYER_TAP_KEY(1, KC_BSLASH), + [14] = ACTION_LAYER_TAP_KEY(2, KC_TAB), + [15] = ACTION_LAYER_TAP_KEY(3, KC_ENTER), + [16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE), + [17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON), + [18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE), + [19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH), + [20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE), + [21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE), + [22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE), + [23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER), + [24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC), + [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE), + [26] = ACTION_MODS_ONESHOT(MOD_LCTL), + [27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC), + [28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE), + [29] = ACTION_MODS_ONESHOT(MOD_LSFT), + [30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRAVE), + [31] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_BSLASH), }; diff --git a/converter/m0110_usb/keymap_for_editor.c b/converter/m0110_usb/keymap_for_editor.c deleted file mode 100644 index d20f298f..00000000 --- a/converter/m0110_usb/keymap_for_editor.c +++ /dev/null @@ -1,118 +0,0 @@ -/* -Copyright 2014 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include -#include "keycode.h" -#include "keymap_common.h" - - -#ifdef KEYMAP_SECTION_ENABLE -const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] __attribute__ ((section (".keymap.keymaps"))) = { -#else -const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { -#endif - /* Default: - * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Clr| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| - * |-----------------------------------------------------' | |---------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Enter | | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | - * |---------------------------------------------------------| |-----------|Ent| - * |Ctl |Gui | Space |Alt| \|Lft|Rgt|Dn | | 0| .| | - * `---------------------------------------------------------' `---------------' - */ - [0] = KEYMAP( - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, CLR, EQL, PSLS,PAST, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, - LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT, FN15, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, - LCTL,LGUI, FN16, LALT,FN31,LEFT,RGHT,DOWN, P0, PDOT - ), - /* Cursor Layer(WASD, IJKL) - * ,---------------------------------------------------------. ,---------------. - * |Esc| F1| F2| F3| F4| F5| F6| F7| F8| F9|F10|F11|F12|Delet| |Nlk| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Caps |Hom| Up|PgU| | | | |Psc|Slk|Pau|Up |Ins| | | 7| 8| 9| -| - * |-----------------------------------------------------' | |---------------| - * |Caps |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Enter | | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Shift |End| |PgD| | | | |End|PgD|Dow|Shif|PgU| | 1| 2| 3| | - * |---------------------------------------------------------| |-----------|Ent| - * |Ctl |Gui | Space |Alt | \|Hom|End|PgD| | 0| .| | - * `---------------------------------------------------------' `---------------' - */ - [3] = KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, - CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS, - LCAP,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN15, P4, P5, P6, PPLS, - LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, - LCTL,LGUI, FN16, LALT,FN31,HOME,END, PGDN, P0, PDOT - ), - [4] = KEYMAP( - ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, - CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, INS, P7, P8, P9, PMNS, - LCAP,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT, FN15, P4, P5, P6, PPLS, - LSFT,END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, - LCTL,LGUI, FN16, LALT,FN31,HOME,END, PGDN, P0, PDOT - ), - [7] = {}, -}; - - -/* - * Fn action definition - */ -#ifdef KEYMAP_SECTION_ENABLE -const uint16_t fn_actions[] __attribute__ ((section (".keymap.fn_actions"))) = { -#else -const uint16_t fn_actions[] PROGMEM = { -#endif - [0] = ACTION_LAYER_MOMENTARY(1), - [1] = ACTION_LAYER_MOMENTARY(2), - [2] = ACTION_LAYER_MOMENTARY(3), - [3] = ACTION_LAYER_MOMENTARY(4), - [4] = ACTION_LAYER_MOMENTARY(5), - [5] = ACTION_LAYER_MOMENTARY(6), - [6] = ACTION_LAYER_MOMENTARY(7), - [7] = ACTION_LAYER_TOGGLE(1), - [8] = ACTION_LAYER_TOGGLE(2), - [9] = ACTION_LAYER_TOGGLE(3), - [10] = ACTION_LAYER_TAP_TOGGLE(1), - [11] = ACTION_LAYER_TAP_TOGGLE(2), - [12] = ACTION_LAYER_TAP_TOGGLE(3), - [13] = ACTION_LAYER_TAP_KEY(1, KC_F), - [14] = ACTION_LAYER_TAP_KEY(2, KC_J), - [15] = ACTION_LAYER_TAP_KEY(3, KC_ENTER), - [16] = ACTION_LAYER_TAP_KEY(4, KC_SPACE), - [17] = ACTION_LAYER_TAP_KEY(5, KC_SCOLON), - [18] = ACTION_LAYER_TAP_KEY(6, KC_QUOTE), - [19] = ACTION_LAYER_TAP_KEY(7, KC_SLASH), - [20] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_SPACE), - [21] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_SPACE), - [22] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_QUOTE), - [23] = ACTION_MODS_TAP_KEY(MOD_RCTL, KC_ENTER), - [24] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_ESC), - [25] = ACTION_MODS_TAP_KEY(MOD_LCTL, KC_BSPACE), - [26] = ACTION_MODS_ONESHOT(MOD_LCTL), - [27] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_ESC), - [28] = ACTION_MODS_TAP_KEY(MOD_LSFT, KC_BSPACE), - [29] = ACTION_MODS_ONESHOT(MOD_LSFT), - [30] = ACTION_MODS_TAP_KEY(MOD_RSFT, KC_GRAVE), - [31] = ACTION_MODS_TAP_KEY(MOD_RALT, KC_BSLASH), -}; diff --git a/converter/m0110_usb/keymap_intl.c b/converter/m0110_usb/keymap_intl.c index 80b02930..6cc251a2 100644 --- a/converter/m0110_usb/keymap_intl.c +++ b/converter/m0110_usb/keymap_intl.c @@ -30,29 +30,17 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { * |------------------------------------------------------, | |---------------| * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | | 4| 5| 6| ,| * |---------------------------------------------------------| |---------------| - * |Shif| <| Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | + * |Shif| <| Z| X| C| V| B| N| M| ,| ,| /| | | 1| 2| 3| | * `---------------------------------------------------------' |-----------|Ent| - * |Opt|Mac | Space |Fn |Opt| | 0| .| | + * |Opt|Mac | Space |Fn | | | 0| .| | * `-----------------------------------------------' `---------------' - * M0110A(not existent?) - * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]|Ret| | 7| 8| 9| -| - * |------------------------------------------------------, | |---------------| - * |Ctrl | A| S| D| F| G| H| J| K| L| ;| '| \| | | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Shif| <| Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | - * |---------------------------------------------------------| |-----------|Ent| - * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| | - * `---------------------------------------------------------' `---------------' */ [0] = KEYMAP_INTL( GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,EQL, PSLS,PAST, TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC,ENT, P7, P8, P9, PMNS, LCTL,A, S, D, F, G, H, J, K, L, SCLN,QUOT,BSLS, P4, P5, P6, PPLS, - LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, - LALT,LGUI, SPC, FN0, LEFT,RGHT,DOWN, P0, PDOT + LSFT,NUBS,Z, X, C, V, B, N, M, COMM,DOT, SLSH, P1, P2, P3, PENT, + LALT,LGUI, SPC, FN0, P0, PDOT ), /* Cursor Layer * ,---------------------------------------------------------. ,---------------. @@ -62,17 +50,17 @@ const uint8_t keymaps[][MATRIX_ROWS][MATRIX_COLS] PROGMEM = { * |------------------------------------------------------, | |---------------| * |Ctrl |Lef|Dow|Rig| | | | |Hom|PgU|Lef|Rig|Ins| | | 4| 5| 6| ,| * |---------------------------------------------------------| |---------------| - * |Shif| <|End| |PgD| | | | |End|PgD|Dow|Shift | | 1| 2| 3| | + * |Shif| <|End| |PgD| | | | |End|PgD|Dow| | | 1| 2| 3| | * `---------------------------------------------------------' |-----------|Ent| - * |Opt|Mac | Space |Fn |Opt| | 0| .| | + * |Opt|Mac | Space |Fn | | | 0| .| | * `-----------------------------------------------' `---------------' */ [1] = KEYMAP_INTL( ESC, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12, DEL, NLCK,EQL, PSLS,PAST, CAPS,HOME,UP, PGUP,NO, NO, NO, NO, PSCR,SLCK,PAUS,UP, NO, ENT, P7, P8, P9, PMNS, LCTL,LEFT,DOWN,RGHT,NO, NO, NO, NO, HOME,PGUP,LEFT,RGHT,INS, P4, P5, P6, PPLS, - LSFT,NO, END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, PGUP, P1, P2, P3, PENT, - LALT,LGUI, SPC, FN0, HOME,END, PGDN, P0, PDOT + LSFT,NO, END, NO, PGDN,NO, NO, NO, NO, END, PGDN,DOWN, P1, P2, P3, PENT, + LALT,LGUI, SPC, FN0, P0, PDOT ), }; diff --git a/converter/m0110_usb/keymap_plain.c b/converter/m0110_usb/keymap_plain.c deleted file mode 100644 index d1507fca..00000000 --- a/converter/m0110_usb/keymap_plain.c +++ /dev/null @@ -1,64 +0,0 @@ -/* -Copyright 2014 Jun Wako - -This program is free software: you can redistribute it and/or modify -it under the terms of the GNU General Public License as published by -the Free Software Foundation, either version 2 of the License, or -(at your option) any later version. - -This program is distributed in the hope that it will be useful, -but WITHOUT ANY WARRANTY; without even the implied warranty of -MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -GNU General Public License for more details. - -You should have received a copy of the GNU General Public License -along with this program. If not, see . -*/ -#include -#include "keycode.h" -#include "keymap_common.h" - - -const uint8_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = { - /* Default: - * M0110 M0120 - * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Backs| |Nlk| -| +| *| - * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| \| | 7| 8| 9| /| - * |---------------------------------------------------------| |---------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| ,| - * |---------------------------------------------------------| |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shift | | 1| 2| 3| | - * `---------------------------------------------------------' |-----------|Ent| - * |Opt|Mac | Space |Mac |Opt| | 0| .| | - * `-----------------------------------------------' `---------------' - * M0110A - * ,---------------------------------------------------------. ,---------------. - * | `| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =|Bcksp| |Nlk| =| /| *| - * |---------------------------------------------------------| |---------------| - * |Tab | Q| W| E| R| T| Y| U| I| O| P| [| ]| | | 7| 8| 9| -| - * |-----------------------------------------------------' | |---------------| - * |Caps | A| S| D| F| G| H| J| K| L| ;| '|Return| | 4| 5| 6| +| - * |---------------------------------------------------------| |---------------| - * |Shift | Z| X| C| V| B| N| M| ,| ,| /|Shft|Up | | 1| 2| 3| | - * |---------------------------------------------------------' |-----------|Ent| - * |Opt |Mac | Space | \|Lft|Rgt|Dn | | 0| .| | - * `---------------------------------------------------------' `---------------' - */ - [0] = KEYMAP( - GRV, 1, 2, 3, 4, 5, 6, 7, 8, 9, 0, MINS,EQL, BSPC, NLCK,PEQL,PSLS,PAST, - TAB, Q, W, E, R, T, Y, U, I, O, P, LBRC,RBRC, P7, P8, P9, PMNS, - LCAP,A, S, D, F, G, H, J, K, L, SCLN,QUOT, ENT, P4, P5, P6, PPLS, - LSFT,Z, X, C, V, B, N, M, COMM,DOT, SLSH, UP, P1, P2, P3, PENT, - LALT,LGUI, SPC, RGUI,BSLS,LEFT,RGHT,DOWN, P0, PDOT - ), -}; - -/* - * Fn action definition - */ -const uint16_t fn_actions[] PROGMEM = { -}; - -