From 12eaedf9cf1a9ab3145ffaf15ff3df02c35e6f13 Mon Sep 17 00:00:00 2001
From: tmk <hasu@tmk-kbd.com>
Date: Sun, 5 Jul 2020 12:40:16 +0900
Subject: [PATCH 1/1] ibmpc: Change timeout period: 1.0ms to 2.0ms

Timeout error *could*(not always) detects when signal sequence takes beyond 1.0ms.
Now this gives 2.0ms window at least to read signal sequence.
---
 tmk_core/protocol/ibmpc.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/tmk_core/protocol/ibmpc.c b/tmk_core/protocol/ibmpc.c
index e84548c6..5f2ca79b 100644
--- a/tmk_core/protocol/ibmpc.c
+++ b/tmk_core/protocol/ibmpc.c
@@ -253,8 +253,8 @@ ISR(IBMPC_INT_VECT)
     if (isr_state == 0x8000) {
         timer_start = t;
     } else {
-        // should not take more than 1ms
-        if (timer_start != t && (uint8_t)(timer_start + 1) != t) {
+        // This gives 2.0ms at least before timeout
+        if ((uint8_t)(t - timer_start) >= 3) {
             ibmpc_isr_debug = isr_state;
             ibmpc_error = IBMPC_ERR_TIMEOUT;
             goto ERROR;
-- 
2.44.0